Lexus ES300 (2002 year). Service manual — part 92
BODY ELECTRICAL – ACCESSORIES
BE-51
211BE35
Security Horn
Engine Hood
Courtesy Switch
Vehicle Horn
Body ECU
Key Unlock
Warning Switch
Theft Deterrent
ECU
Security
Indicator Light
Door Lock Assembly
Motor and Position
Switch
Courtesy Switch
Luggage Door Lock Assembly
Motor and Courtesy Switch
2. Layout of Main Component
BODY ELECTRICAL – ACCESSORIES
BE-52
187BE40
Condition (3)
Condition (5)
Condition (6)
Condition (5)
Disarmed State
Condition (1)
Armed Preparation State
Condition (2)
Armed State
Condition (4)
Alarm State
3. System Operation
Basic Operation
This system activates as described in the diagram below when one of items place in the respective state.
Condition
Item
Condition (1)
There is no ignition key in the ignition key cylinder.
When the doors, engine food, and luggage door are all closed, the transmitter is
used to lock all doors.
When the doors, engine food, and luggage door are all closed, the key is use to
lock all doors.
Condition (2)
When the doors, engine hood, and luggage door are all closed and locked, and 30
seconds have elapsed.
Condition (3)
When one of the doors, engine hood, or luggage door is changed from “close”
to “open”.
When one of the doors, engine hood, or luggage door is changed from “lock” to
“unlock”.
When the ignition key is inserted in the ignition key cylinder.
When a terminal is disconnected from the battery and reconnected.
Condition (4)
Any door, engine hood, or luggage door is opened.
Any door is unlocked with something other than the ignition key or transmitter.
The engine hood is opened.
A terminal is disconnected from the battery and reconnected.
The wiring harness is directly connected as if the turn the ignition switch ON.
Condition (5)
The transmitter is used to unlock the doors.
The key is inserted in the ignition key cylinder and the ignition switch is turned
ON.
When the key is available, and the engine immobiliser is canceled by turning the
ignition switch ON.
BODY ELECTRICAL – ACCESSORIES
BE-53
Forced Door Lock Operation
When the system starts the alarm state, and one of the doors is subsequently unlocked, the forced door lock
operation forcefully outputs a door lock signal to prevent intrusion into the vehicle. This operation becomes
activated when all the starting conditions listed below have been met, and stops when one of the stopping
conditions occurs.
Condition
Item
The theft deterrent system is in the alarm state.
Starting Condition
There is no key inserted in the ignition key cylinder.
g
If one of the doors is unlocked.
All doors are locked.
Stopping Condition
The warning ends.
pp g
The key is inserted in the ignition key cylinder.
Alarm Memory Operation
When the driver returns to the vehicle and cancels the theft deterrent system, this function illuminates the
taillights for 2 seconds to inform the driver that the theft deterrent system had been tripped and was in the
alarm state.
BODY ELECTRICAL – WIPER SYSTEM
BE-19
209BE03
Rain Sensor
Wiper
Controller
Combination
Switch
Wiper Motor
211BE17
Wiper Motor
Combination Switch
Wiper and Washer Switch
Rain
Sensor
Wiper Controller
WIPER SYSTEM
RAINDROP SENSING FUNCTION
1. General
When the wiper switch is in the AUTO position, this function uses a rain sensor that is mounted on the front
windshield glass to detect the amount of raindrops, and controls an optimal wiping timing accordingly.
System Diagram
2. Layout of Main Component
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст