Lexus ES300 (2002 year). Service manual — part 88
BODY ELECTRICAL – ACCESSORIES
BE-40
211BE27
Power Window
Motor and
Position Switch
Power Window
Motor and
Position Switch
Power Window
Master Switch
Driver Door
ECU
Rear LH
Power Window Switch
Rear LH
Door ECU
BEAN
Body ECU
Local
Communication
BEAN
Front Passenger Side
Power Window Switch
Front Passenger
Door ECU
Rear RH Power
Window Switch
Rear RH
Door ECU
Power Window
Motor and
Position Switch
Power Window
Motor and
Position Switch
POWER WINDOW SYSTEM
1. General
The power window system has the following functions:
Function
Outline
Manual up-and-down
function
This function causes the window to open or close while the power
window switch is being pulled halfway up or pushed halfway down. The
window stops as soon as the switch is released.
All door one-touch auto
up-and-down function
The all door one-touch auto up-and-down function enables the window
of all door to be fully opened or closed at a touch of the power window
switch.
Jam protection function
A jam protection function automatically stops the power window and
moves it downward if a foreign object gets jammed in the window during
one-touch auto-up operation.
Remote control function
The up-and-down operations of the front passenger door window and the
rear door windows can be controlled by operating the power window
master switch.
Key-off operation function
The driver’s door key-off operation function makes it possible to operate
the power window for approximately 43 seconds after the ignition switch
is turned to the ACC or LOCK position, if the front doors are not opened.
Key-linked down function
A key-linked down function, which is linked to the driver door key
cylinder operation, open the window of the all doors.
Transmitter-linked down
function
When the body ECU receives an unlock signal from the transmitter
continuously for longer than 2.5 seconds, the door ECUs control their
power window motors in accordance with the signal to open the
windows.
System Diagram
BODY ELECTRICAL – ACCESSORIES
BE-41
211BE28
Power Window
Master Switch
Body ECU
Ignition Switch
Front Passenger Side
Power Window Switch
Rear LH
Power Window
Motor and Regulator
Rear LH
Power Window
Switch
Driver Side
Power Window
Motor and
Regulator
Front Passenger Side
Power Window Motor
and Regulator
Rear RH
Power Window
Switch
Rear RH
Power Window
Motor and Regulator
2. Layout of Main Component
BODY ELECTRICAL – ACCESSORIES
BE-71
211BE49
211BE48
177BE31
Rear
Sunshade
Rear Sunshade
Switch
Screen
Arms
Curtain Rail
Link
Motor
Sunshade Gear
Assembly
Link
Base
211BE51
Rear Sunshade Switch
Back-up Light Switch
(Reverse-linked auto
down function control)
Sunshade Gear Assembly
Sunshade
ECU
Limit
Switch
Motor
REAR SUNSHADE
An electrical type rear sunshade, which blocks the direct sunlight entering through the rear window in or-
der to ensure the comfort of the rear seat passengers, has been adopted as an option.
This sunshade can easily be deployed or retracted by operating the rear sunshade switch located on the
console upper panel. To prevent the rear view from being blocked by the deployed sunshade, this switch
is provided with a reverse-linked auto-down function, which automatically lowers the screen when the
shift lever is engaged in reverse.
This system is controlled by the sunshade ECU, and receives the reverse position signal from the back-up
light switch to control the reverse-linked auto-down function.
System Diagram
BODY ELECTRICAL – ACCESSORIES
BE-71
208BE47
Compass Display
COMP Switch
186BE06
186BE05
337.5
22.5
67.5
112.5
157.5
202.5
247.5
292.5
N
NE
E
SE
S
SW
N
NW
Display
Calibration
Azimuths
Display
Azimuths
Display
N
NE
E
SE
S
SW
W
NW
157.5
202.5
202.5
247.5
247.5
292.5
292.5
337.5
337.5
22.5
22.5
67.5
67.5
112.5
112.5
157.5
Service Tip
As the compass system memorize the vehicle’s marked magnetic field, it is necessary to do calibration
for each vehicle. Once calibration has done, it is not necessary to do the calibration unless having a sud-
den magnetic field change. In case of occurrence of a sudden magnetic field change, “C” will be display
in the compass display and it is necessary to do the calibration again.
For details, refer to 2002 LEXUS ES300 Repair Manual (Pub. No. RM911U).
INSIDE REAR VIEW MIRROR
Compass Display
Earth magnetism sensor has been built-in inside the mirror which has less influence on the magnetization
of the vehicle. Thus, the accuracy has been improved.
The compass indicates the North as 0 and the forward direction of the vehicle by 8 azimuths.
By operating the “COMP” switch, whether or not to indicate the compass, establishment of the compass
zone and calibration can be performed.
Compass Display
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст