Lexus GS300/400 (2000 year). Service manual — part 57
I01824
Wire Harness Side
e–2–1
2
1
I01824
Wire Harness Side
e–2–1
2
1
BE–186
–
BODY ELECTRICAL
SEAT HEATER SYSTEM
2487
4.
INSPECT SEAT HEATER CUSHION CONTINUITY
Inspect the seat heater inner cushion and front cushion continu-
ity between terminals, as shown.
Tester connection
Condition
Specified condition
1 – Body ground
Seat heater switch ON
Battery positive volatage
If continuity is not as specified, replace the seat back pad.
5.
INSPECT SEAT BACK CONTINUITY
Inspect the seat back continuity between terminals, as shown.
Tester connection
Condition
Specified condition
2 – Body ground
Constant
Continuity
If continuity is not as specified, replace the seat back pad.
BE0GF–05
I01371
Fuel Lid Opener Switch
Driver Side Junction Block
FUEL OPN Fuse
Fuel Lid Opener Motor
–
BODY ELECTRICAL
FUEL LID OPENER SYSTEM
BE–187
2488
FUEL LID OPENER SYSTEM
LOCATION
BE0GG–03
I04184
I04185
Wire Harness Side
I04186
2
3
BE–188
–
BODY ELECTRICAL
FUEL LID OPENER SYSTEM
2489
INSPECTION
1.
INSPECT FUEL LID OPENER SWITCH CONTINUITY
(a)
Check that continuity exists between terminals with the
switch ON (Lever pulled).
(b)
Check that no continuity exists between terminals with the
switch OFF (Lever free).
If continuity is not as specified, replace the switch assembly.
2.
INSPECT FUEL LID OPENER SWITCH CIRCUIT
Disconnect the connector from the switch and inspect the con-
nector on the wire harness side, as shown.
Tester connection
Condition
Specified condition
1 – Ground
Constant
Continuity
2 – Ground
Constant
Battery positive voltage
If circuit is not as specified, inspect the circuits connected to oth-
er parts.
3.
INSPECT FUEL LID OPENER SOLENOID OPERATION
(a)
Connect the positive (+) lead from the battery to terminal
2 and negative (–) lead to terminal 3.
(b)
Check that the solenoid operates in the fuel lid opening.
If operation is not as specified, replace the solenoid.
I04187
Wire Harness Side
–
BODY ELECTRICAL
FUEL LID OPENER SYSTEM
BE–189
2490
4.
INSPECT FUEL LID OPENER MOTOR CIRCUIT
Disconnect the connector from the switch and inspect the con-
nector on the wire harness side, as shown.
Tester connection
Condition
Specified condition
3 – Ground
Constant
Continuity
2 – Ground
Fuel lid opener switch ON (Lever pulled)
Battery positive voltage
If circuit is not as specified, inspect the circuits connected to oth-
er parts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст