Lexus GS300/400 (2000 year). Service manual — part 45
Disarming condition
Any of the following conditions is met
When all doors and engine hood are closed, lock all the doors using a key.
When all doors and engine hood are closed, lock all the doors using wireless remote function.
When all doors and engine hood are closed, open and close either of doors and engine hood
then close and lock all doors and engine hood.
Disarming preparation condition
Any of the following conditions is met
30 seconds elapse when the engine hood
is closed and all doors are locked.
Any of the following conditions is met
Close and open either of all doors and
engine hood.
Lock and unlock either of doors.
Insert a key into the ignition key cylinder.
Reconnect the battery.
Arming condition
Any of the following conditions is met
Unlock the locked doors using the wireless
remote function.
Unlock the locked doors using the key.
Insert the key into the ignition key cylinder
and turn the ignition key ON.
Any of the following conditions is met
Either of closed doors opens.
Either of locked doors is unlocked by any
operation other than key or wireless remote
function.
The closed engine hood is opened.
The battery is reconnected.
Alarming condition
Any of the following conditions is met
Unlock the locked doors using the wireless
remote function.
Unlock the locked doors using the key.
Insert the key into the ignition key cylinder
and turn the ignition key ON.
In this mode, once theft is detected, it is
informed using light and sound to people
around the vehicle.
The alarming time described above passes.
(Key not inserted in ignition cylinder.)
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
BE–143
2444
2.
ACTIVE ARMING MODE
BE–144
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
2445
Indicator light output:
Condition
Indicator light
Disarming condition
OFF
Arming preparation condition
ON
Arming condition
OFF
Alarming condition
ON
HINT:
Even in disarming condition, the indicator light flash. (Due to the
signal output form immobilizer system). The indicator always
flashes receiving the signal from the immobilizer system at any
time in the arming condition.
Flashing frequency:
0.75 seconds (ON)
1.25 seconds (OFF)
3.
PASSIVE ARMING MODE
This mode can be switched according to the specified op-
eration.
All initially set modes (when shipped from factory) are ac-
tive mode. (No passive mode)
Disarming condition (A)
Disarming preparation condition
Any of the following
conditions is met
With all doors and
engine hood closed
30 seconds elapse.
Arming condition
Any of the following conditions is met
(Refer to HINT * on the next page)
Press unlock switch of the wireless.
Insert the key into the driver and passenger
doors key cylinders, turn the key to unlock.
Insert the key into the ignition key cylinder
and turn the key to ON.
Any of the following conditions is met
Either of closed door is opened and entry
delay time elapses. (Refer to HINT on the
next page)
Engine hood is closed and opened.
Battery is reconnected.
Alarming condition
In this mode, once theft is detected, it is
informed using light and sound to people
around the vehicle.
The alarming time described above passes.
Any of the following conditions is met
Pull the key out of the ignition key cylinder which the key was inserted in.
Disarming condition (B)
Any of the following conditions is met
Press the unlock button of wireless.
Insert the key into the key cylinder of driver
or passenger seat and turn the key to unlock.
Insert the key into the ignition key cylinder.
Reconnect the battery.
Any of the following conditions is met
Open and close either of all doors and
engine hood.
Any of the following conditions is
met
Close and open either of
all doors and engine hood.
Any of the following conditions is met
Press the unlock button of wireless.
Insert the key into the key cylinder of driver
or passenger seat and turn the key to unlock.
Insert the key into the ignition key cylinder.
Reconnect the battery.
Any of the following conditions is met
Press unlock switch of the wireless.
Insert the key into the driver and passenger
doors key cylinders, turn the key to unlock.
Insert the key into the ignition key cylinder
and turn the key to ON.
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
BE–145
2446
Door
Indicator
Alarming output
System condition
Arming condition
Alarming
condition
Entry delay time
Close
Open
ON
OFF
ON
OFF
BE–146
–
BODY ELECTRICAL
THEFT DETERRENT SYSTEM
2447
HINT:
In arming condition either closed door is opened, entry delay
occurs. (15 secs.)
During this time, the mode transfers to disarming condition
when the condition described above * is met.
When the condition is not met, the system judges theft occurs,
the mode transfers to alarming condition.
(a)
Indicator light output:
Condition
Indicator light
Disarming condition
OFF
Arming preparation condition
ON
Arming condition
(Entry delay time)
OFF
(ON)
Alarming condition
ON
HINT:
Even in disarming condition, the indicator light flash. (Due to the
signal output form immobilizer system). The indicator always
flashes receiving the signal from the immobilizer system at any
time in the arming condition.
Flashing frequency:
0.75 seconds (ON)
1.25 seconds (OFF)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст