Lexus GS300/400 (2000 year). Service manual — part 54
I04166
2
1
BE–174
–
BODY ELECTRICAL
POWER SEAT CONTROL SYSTEM
2475
(b)
Continue to apply voltage, check that a circuit breaker op-
eration noise can be heard within 4 to 60 seconds.
(c)
Reverse the polarity, check that the lumbar support be-
gins to move release side with in spproximately 60 se-
conds.
If operation is not as specified, replace the motor.
BE02J–10
I01368
Mirror Assembly
Mirror Motor
Mirror Switch
Left/Right Adjustment Switch
Mirror Control Switch
Ignition Switch
Driver Side Junction Block
Body ECU No.2
–
BODY ELECTRICAL
POWER MIRROR CONTROL SYSTEM
BE–175
2476
POWER MIRROR CONTROL SYSTEM
LOCATION
BE10W–02
I04167
Left/Right Adjustment Switch
Mirror Switch
9
7
6
5
8
I07733
Retract Switch
Mirror Switch
Left/Right
Adjustment Switch
Mirror Switch
Retract Switch
9
8
7
6
5
BE–176
–
BODY ELECTRICAL
POWER MIRROR CONTROL SYSTEM
2477
INSPECTION
1.
USA/CANADA models:
INSPECT MIRROR SWITCH CONTINUITY
Switch position
Tester connection
Resistance (
Ω
)
LEFT
8 – 9
100
RIGHT
8 – 9
0
Illumination
5 – 6
Continuity
Measure resistance between terminals 7 and 9.
Switch position
Resistance (
Ω
)
UP
Approx. 100
RIGHT
250
DOWN
470
LEFT
800
If continuity is not as specified, replace the switch.
2.
USA/CANADA models:
INSPECT MIRROR SWITCH CIRCUIT
(See page
3.
TAIWAN model:
INSPECT MIRROR SWITCH CONTINUITY
Switch position
Tester connection
Resistance (
Ω
)
LEFT
8 – 9
100
RIGHT
8 – 9
0
Illumination
5 – 6
Continuity
Measure resistance between terminals 7 and 9.
Switch position
Resistance (
Ω
)
UP
Approx. 100
RIGHT
250
DOWN
470
LEFT
800
If continuity is not as specified, replace the switch.
4.
TAIWAN model:
INSPECT RETRACT SWITCH CONTINUITY
Switch position
Tester connection
Specified condition
OFF
–
No continuity
ON
1 – 2
Continuity
If continuity is not as specified, replace the switch.
5.
TAIWAN model:
INSPECT MIRROR SWITCH CIRCUIT
(See page
I04270
5
4
I04271
5
4
I04272
5
6
I04273
5
6
I04168
1
2
–
BODY ELECTRICAL
POWER MIRROR CONTROL SYSTEM
BE–177
2478
6.
w/o Driving position memory:
INSPECT MIRROR MOTOR OPERATION
(a)
Connect the positive (+) lead from the battery to terminal
4 and the negative (–) lead to terminal 5, and check that
the mirror turns to the left side.
(b)
Reverse the polarity, and check that the mirror turns to the
right side.
(c)
Connect the positive (+) lead from the battery to terminal
6 and the negative (–) lead to terminal 5, and check that
the mirror turns upward.
(d)
Reverse the polarity, and check that the mirror turns
downward.
If operation is not as specified, replace the mirror assembly.
7.
w/o Driving position memory:
INSPECT MIRROR MOTOR CIRCUIT
Left side: (See page
Right side: (See page
8.
w/ Driving position memory:
INSPECT MIRROR MOTOR OPERATION
(a)
Connect the positive (+) lead from the battery to terminal
1 and the negative (–) lead to terminal 2, and check that
the mirror turns to the left side.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст