Lexus RX300 (MCU15). Service manual — part 386
DI–774
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
LEXUS RX300 (RM785E)
12. Map DISC cannot be inserted.
INSPECTION PROCEDURE
1
Check the MAP DISC.
NG
Replace the MAP DISC.
OK
2
Insert a MAP DISC without tilt.
OK
Normal.
NG
3
Check the navigation ECU.
PREPARATION:
Disconnect the navigation ECU connector.
CHECK:
Check voltage terminals +B.
OK:
+B: 10 – 14 V
CHECK:
Check voltage terminal ACC when turn ignition switch ACC or ON position.
OK:
ACC: 10 – 14 V
CHECK:
Check continuity terminal GND.
OK:
GND: Continuity
NG
Replace or repair wire harness.
OK
DI7P5–02
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
DI–775
LEXUS RX300 (RM785E)
Replace the navigation ECU.
DI–776
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
LEXUS RX300 (RM785E)
13. MAP screen display does not appear. (Disc Caution screen
does not change)
INSPECTION PROCEDURE
1
Take appropriate measures according to the caution screen.
OK
Normal.
NG
2
Check map DISC.
NG
Replace the disc.
OK
Replace the navigation ECU.
CAUTION SCREEN
CAUTION MESSAGE
CAUSE
CORRECTIVE ACTION
Cover is open.
Close it.
The cover of the map disk slot is open.
Close the cover,
No disc is set.
Set a map disc.
No map disk is inserted.
Insert a proper map disc.
Data cannot be read properly.
Check it for scratches or dirt.
Data cannot be read because the map disc is
dirty or scratched.
Wipe off dirt on the both disc surface with soft
cloth.
Data cannot be read.
Check the correct map disc is set.
Something other than map disc is inserted.
Insert a correct map disc.
Due to high temperature of the player,
data cannot be read.
Pick–up part of the player is heated to a high
temperature.
Stop the vehicle at a shaded cool place and turn
the ignition switch OFF.
When confirming that the temperature of the navi-
gation ECU has been lowered, turn the ignition
switch ON.
Data cannot be read.
Contact your sales dealer.
The player cannot read data from the map disc
temporarily.
Turn the ignition switch OFF and ON.*1
*1: If the same caution screen appears again after turning the ignition switch ON, replace the navigation
ECU.
DI7P6–02
–
DIAGNOSTICS
LEXUS NAVIGATION SYSTEM
DI–777
LEXUS RX300 (RM785E)
14. Map is displayed in white or blue screen. (Switches and ve-
hicle position mark is displayed)
INSPECTION PROCEDURE
1
Set the map scale to the max.
OK
Normal.
HINT:
Correct the current position and check it again.
NG
2
Wipe the disc with a soft cloth, insert it again, and turn the ignition switch ON
from OFF.
NG
Replace the disc.
OK
Normal.
HINT:
If the trouble still occurs, replace the navigation ECU.
DI7P7–02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст