Lexus RX300 (MCU15). Service manual — part 9
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
Flat Surfacing
ANTI-RUST TREATMENT
– Body Panel Sealing Areas
AR-7
Flat Surfacing
Flat
Surfacing
Flat
Surfacing
Flat Surfacing
ANTI-RUST TREATMENT
– Body Panel Sealing Areas
AR-8
ANTI-RUST TREATMENT
– Body Panel Undercoating Areas
AR-9
BODY PANEL UNDERCOATING AREAS
HINT:
1.
First wipe off any dirt, grease or oil with a rag soaked in a grease, wax and silicone remover.
2.
Cover the surrounding areas with masking paper to avoid coating unnecessary areas. If other areas
are accidently coated, wipe off the coating immediately.
3.
Apply the first coating of undercoat to all welded areas and panel joints, then apply a second coat over
the entire area.
4.
Do not coat parts which become hot, such as the tailpipe, or moving parts, such as the propeller shaft.
5.
Besides the locations described below, apply undercoating to all weld points under the body to insure
corrosion prevention.
6.
Be sure to seal the edge of the flange of the member and bracket with undercoating.
7.
If undercoat is damaged by peeling, cracks, etc., be sure to repair as necessary.
8.
Before the undercoat apply sealer allowing rust prevention to be attained.
REFERENCE:
Referring to the notes above, undercoating should be applied according to the specifica-
tions for your country.
Back Door Hinge
Back Door
Fuel Filler
Opening Lid Hinge
Hood Hinge
Hood
Door
Rear Door
Hinge
Front Door Hinge
ANTI-RUST TREATMENT
– Body Panel Anti-Rust Agent (Wax) Application Areas
AR-10
BODY PANEL ANTI-RUST AGENT (WAX) APPLICATION AREAS
HINT:
1.
Whenever adjusting the doors and hoods, apply anti-rust agent (wax) around the hinges.
2.
Even if partially repairing a part, apply anti-rust agent (wax) over the entire application area of the part.
3.
Wipe off the anti-rust agent immediately with a rag soaked in a grease, wax and silicone remover, if
accidently applied to other areas.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст