Lexus RX300 (MCU15). Service manual — part 590
AX0BD–02
D03708
Matchmarks
D03709
D03710
D03711
D03712
–
AUTOMATIC TRANSAXLE
DIFFERENTIAL CASE
AX–103
U140F AX (RM848E)
DISASSEMBLY
1.
REMOVE DIFFERENTIAL RING GEAR
(a)
Place the matchmarks on the ring gear and the differential
case.
(b)
Remove the 16 bolts.
(c)
Using a plastic hammer, tap on the ring gear to remove it
from the case.
2.
REMOVE FRONT DIFFERENTIAL
(a)
Remove the differential LH case from the differential case
assembly.
(b)
Remove the front differential case from the differential LH
case.
D03713
D03714
D03715
D03716
D03717
AX–104
–
AUTOMATIC TRANSAXLE
DIFFERENTIAL CASE
U140F AX (RM848E)
(c)
Remove the front differential side gear, front differential
side gear thrust washer, conical washer and center differ-
ential side gear thrust washer No.2 from the differential
LH case.
(d)
Using a snap ring expander, remove the snap ring from
the front differential case.
(e)
Using a pin punch and hammer, drive out the 3 pins.
(f)
Remove the 3 pinion shafts from the front differential
case.
(g)
Remove the 4 front differential pinions, 4 front differential
pinion thrust washers, front differential pinion shaft hold-
er, front differential side gear and front differential side
gear thrust washer from the front differential case.
D03823
SST
SST
D03864
Matchmarks
D03718
D03719
D03720
–
AUTOMATIC TRANSAXLE
DIFFERENTIAL CASE
AX–105
U140F AX (RM848E)
3.
REMOVE LH BEARING
Using SST, remove the tapered roller bearing.
SST
09950–00020, 09950–00030, 09950–60010
(09951–00060)
4.
REMOVE CENTER DIFFERENTIAL
(a)
Place matchmarks on both the intermediate case and dif-
ferential RH case.
(b)
Using a torx socket wrench, remove the 15 bolts.
(c)
Remove the intermediate case from the differential RH
case.
(d)
Remove the center differential side gear, conical washer
and center differential side gear thrust washer No.1 from
the differential RH case.
D03721
D03883
SST
D03722
SST
D03734
SST
D03736
SST
AX–106
–
AUTOMATIC TRANSAXLE
DIFFERENTIAL CASE
U140F AX (RM848E)
(e)
Remove the center differential pinion thrust washer, cen-
ter differential pinion and center differential pinion spider
from the differential intermediate case.
5.
REMOVE RH BEARING
Using SST and a press, remove the tapered roller bearing.
SST
09950–00020, 09950–60010 (09951–00600)
6.
REMOVE TRANSAXLE HOUSING SIDE BEARING
OUTER RACE
Using SST, remove the outer race.
SST
09308–00010
7.
REMOVE TRANSAXLE HOUSING OIL SEAL
Using SST and a hammer, remove the oil seal from the trans-
axle housing.
SST
09649–17010, 09950–70010 (09951–07100)
8.
REMOVE TRANSAXLE CASE SIDE BEARING OUTER
RACE
Using SST, remove the outer race.
SST
09308–00010
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст