Lexus RX300 (MCU15). Service manual — part 595
D03102
SST
D03103
D03104
D03106
LH
RH
SST
SST
SST
–
AUTOMATIC TRANSAXLE
TRANSFER
AX–123
U140F AX (RM848E)
(d)
Using the soft jaws, hold the bearing retainer RH in a vise.
(e)
Using SST, remove the outer race, washer and oil seal
from the bearing retainer RH.
SST
09308–00010
NOTICE:
Be careful not to damage the bearing retainer RH.
(f)
Using snap ring pliers, remove the snap ring.
(g)
Remove the side gear shaft holder bearing from the bear-
ing retainer RH.
14.
REMOVE CENTER DIFFERENTIAL CONTROL COU-
PLING
15.
REMOVE TAPERED ROLLER BEARING LH AND RH
Using SST, remove the tapered roller bearing inner race LH and
RH.
SST
09950–00020, 09950–00030, 09950–60010
(09951–00360)
D03109
D03110
Matchmarks
D03111
D03112
D03113
SST
AX–124
–
AUTOMATIC TRANSAXLE
TRANSFER
U140F AX (RM848E)
16.
CHECK RING GEAR RUNOUT
Using a dial indicator, check the ring gear runout.
Maximum runout: 0.1 mm (0.004 in.)
17.
REMOVE RING GEAR
(a)
Place matchmarks on both the ring gear and the center
differential control coupling.
(b)
Remove the 12 bolts.
(c)
Using a plastic hammer, remove the ring gear.
18.
CHECK CENTER DIFFERENTIAL CONTROL COU-
PLING RUNOUT
Using a dial indicator, check the center differential control cou-
pling runout.
Maximum runout: 0.07 mm (0.0028 in.)
19.
REMOVE DRIVEN PINION
(a)
Using SST and a hammer, unstake the lock nut.
SST
09930–00010 (09931–00010, 09931–00020)
D03114
SST
D03115
D03116
SST
D03117
D03118
–
AUTOMATIC TRANSAXLE
TRANSFER
AX–125
U140F AX (RM848E)
(b)
Using SST, remove the lock nut.
SST
09326–20011, 09556–16030
(c)
Using a press, remove the driven pinion, rear bearing in-
ner race and spacer.
NOTICE:
S
Place a waste cloth inside the case to prevent the
driven pinion from dropping.
S
Keep the case level using a wood plate.
(d)
Using SST and a press, remove the front bearing inner
race from the driven pinion.
SST
09950–00020
20.
REMOVE BEARING OUTER RACE LH
Using a brass bar and hammer, remove the outer race and
washer.
21.
REMOVE FRONT BEARING OUTER RACE
Using a brass bar and hammer, remove the outer race and
washer.
D03119
AX–126
–
AUTOMATIC TRANSAXLE
TRANSFER
U140F AX (RM848E)
22.
REMOVE REAR BEARING OUTER RACE
Using a brass bar and hammer, remove outer race.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст