Fiat Qubo (2018 year). Instruction — part 3
Single presses of the
or
buttons permit navigation through
the setup menu options.
Operating modes are different
according to the characteristics of the
option selected.
The menu includes the following items:
DIMMER
SPEED BUZZER
TRIP B DATA
SET TIME
SET DATE
SEE RADIO
AUTOCLOSE
UNITS OF MEASUREMENT
LANGUAGE
BUZZER VOLUME
BUTTON VOLUME
SEAT BELT BELTS
SERVICE
PASSENGER AIRBAG
EXIT MENU
NOTE Only the reduced menu can be
accessed while the vehicle is moving
for safety reasons ("Speed Beep"
setting). Stop the vehicle to access the
full menu.
TRIP COMPUTER
General information
The Trip computer is used to display
information on vehicle operation when
the ignition key is turned to MAR.
This function allows you to define two
separate trips, called "Trip A" and
"Trip B", for monitoring the "complete
mission" (journey) of the vehicle in a
reciprocally independent manner. Both
functions can be reset (reset means
start of a new journey).
"Trip A" can be used to display the
values relating to:
External temperature (for Natural
Power vehicles with temperature
sensor)
Range
Distance travelled
Average fuel consumption
Instantaneous consumption
Average speed
Trip time (driving time).
"Trip B", available on multifunction
display only, is used to display
the values relating to:
Distance travelled B
Average consumption B
Average speed B
Trip time B (driving time).
Natural Power versions
NOTE The trip computer data
concerning range, average
consumption and instantaneous
consumption are not available for these
versions.
8)
TRIP control button
The TRIP button, located on the top of
the right steering column stalk fig. 70, is
used (with ignition at MAR) to display
these values and reset them to start
a new journey:
brief press to access the various
values displays;
long press to reset and then start a
new mission.
70
F0T0038
40
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Exit Trip
You can automatically exit the TRIP
function once all the values have been
displayed or by holding the SET
button down for more than 1 second.
WARNING
8) The "Trip B" function may be disabled
(see "Activating Trip B"). "Range" and
"Instantaneous consumption" values
cannot be reset.
41
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING LIGHTS AND MESSAGES
The warning light switches on together with (where the instrument panel permits) a specific message and/or acoustic warning.
These indications are indicative and precautionary and as such must not be considered as exhaustive and/or alternative to
the information contained in the Owner Handbook, which you are advised to read carefully in all cases. In the event of a failure
indication, always refer to the contents of this chapter.
IMPORTANT The failure indicators appearing on the display are divided into two categories: very serious and less serious faults.
Serious faults are indicated by a repeated and prolonged warning "cycle". Less serious faults are indicated by a warning
"cycle" with a shorter duration. Press the
SET button to stop the warning cycle in both cases. The warning light (or the
symbol on the display) on the instrument panel will stay on until the cause of the failure is eliminated.
WARNING LIGHTS ON INSTRUMENT PANEL
Red warning lights
What it means
What to do
red
LOW BRAKE FLUID/HANDBRAKE ENGAGED
The warning light switches on when the key is turned to MAR-
ON, but it should switch off after a few seconds.
Low brake fluid level
The warning light turns on when the level of the brake fluid in
the reservoir falls below the minimum level, possibly due to a
leak in the circuit.
On some versions the display shows the dedicated message.
Restore the brake fluid level, then check that the
warning light has switched off.
30)
Handbrake engaged
The warning light switches on when the handbrake is
engaged.
On some versions, an acoustic tone accompanies the warning
light when the vehicle is moving.
If the warning light comes on while driving, check that
the handbrake is not on.
Release the handbrake, then check that the warning
light has switched off.
If the warning light stays on, contact a Fiat Dealership.
42
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
red
amber
amber
EBD FAILURE
The simultaneous switching on of the
(red),
(amber)
and
(amber) warning lights with the engine on indicates
either an anomaly of the EBD system or that the system is not
available. In this case, the rear wheels may suddenly lock and
the vehicle may swerve when braking sharply.
On some versions the display shows the dedicated message.
Drive very carefully to the nearest Fiat Dealership to
have the system inspected immediately.
red
AIR BAG FAILURE
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds.
The warning light stays on constantly if there is a failure in the
airbag system.
On some versions the display shows the dedicated message.
31) 32)
red
SEAT BELTS REMINDER
(for versions/markets, where provided)
The warning light switches on constantly with the vehicle
stationary and the driver's side or passenger side seat belt (for
versions/markets, where provided) not fastened.
The warning light will flash and a buzzer will sound if the driver
seat belt and the passenger seat belt (for versions/markets,
where provided) are not correctly fastened with the vehicle in
motion.
The buzzer of the S.B.R. (Seat Belt Reminder) system
can only be disabled by a Fiat Dealership.
On some versions, the system may be reactivated using
the Setup menu.
43
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
red
GEARBOX FAILURE
(for versions/markets, where provided)
When the key is turned to MAR, the warning light switches on
but it should switch off after a few seconds.
The warning light flashes (together with a message in the
display and an acoustic signal) to indicate that the gearbox is
faulty.
The warning light can switch on even in the case of
transmission overheating, after a particularly demanding use.
In this case an engine performance limitation is carried out.
If the transmission is faulty, contact a Fiat Dealership as
soon as possible to have the system checked.
red
red
ENGINE COOLANT TEMPERATURE TOO HIGH
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds. The
warning light turns on when the engine is overheated.
The display shows the dedicated message.
In normal driving conditions: stop the car, switch off the
engine and check that the water level in the reservoir is
not below the MIN mark. In this case, wait for a few
minutes to allow the engine to cool down, then slowly
and carefully open the cap. Top up with coolant fluid
making sure that it is included between the MIN and
MAX lines on the vessel. Also check visually for any fluid
leaks. If, when restarting, the warning light switches on
again, contact a Fiat Dealership.
If the vehicle is used under demanding conditions (e.g.
towing trailers uphill or fully loaded): slow down and, if
the light stays on, stop the vehicle. Wait for 2 or 3
minutes with the engine running and slightly accelerated
to further favour the coolant circulation, then stop the
engine. Check that the coolant level is correct as
described above.
IMPORTANT On demanding routes, it is advisable to
keep the engine on and slightly accelerated for a few
minutes before stopping it.
44
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
red
LOW BATTERY CHARGE
The warning light switches on when the ignition key is turned
to MAR, but it should switch off as soon as the engine has
started (with the engine idling a brief delay before switching off
is acceptable).
On some versions the display shows the dedicated message.
If the warning light stays on, contact a Fiat Dealership
immediately.
red
INSUFFICIENT ENGINE OIL PRESSURE/ENGINE OIL
DETERIORATED
When the key is turned to MAR the warning light comes on,
but should go out as soon as the engine is started.
Steady light: Low engine oil pressure
The warning light comes on fixed, together with a message on
the display (for versions/markets, where provided) when the
system detects insufficient engine oil pressure.
33)
On blinking: Engine oil degraded
(for Multijet versions only)
The warning light starts to flash together with a message on
the display (for versions/markets, where provided) when the
system detects that the engine oil has deteriorated.
If the warning light flashes, this does not mean that the vehicle
is faulty, but simply informs the driver that it is now necessary
to change the engine oil as a result of regular vehicle use. If the
oil is not changed, warning light
will also come on and
engine operation is limited to 3000 rpm when a second
threshold is reached.
If the oil is still not changed, when a third deterioration
threshold is reached, the engine is limited to 1500 rpm to avoid
damage.
Contact a Fiat Dealership as soon as possible.
9)
Remember that the deterioration of the engine oil is
accelerated by:
– mainly town use of the vehicle which makes the DPF
regeneration process more frequent
– use of the vehicle for short trips, preventing the engine
from reaching operating temperature
– repeated interruption of the regeneration process,
signalled by the DPF warning light coming on.
45
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
red
LOW ENGINE OIL LEVEL
When turning the ignition key to MAR, the warning light turns
on but it should go off after a few seconds.
This warning light appears on the panel when the engine oil
level falls below the minimum recommended value.
On certain versions a dedicated message is displayed.
Restore the correct engine oil level (see “Checking fluid
levels” in the "Servicing and care" section).
red
DOOR OPEN
On certain versions, the warning light turns on when one or
more doors or the boot are not properly closed.
On some versions the display shows the dedicated message.
Check that all doors or the boot (for versions/markets,
where provided) are perfectly closed.
red
POWER STEERING FAILURE
When the ignition key is turned to MAR-ON the warning light
on the dial turns on, but it should turn off after a few seconds.
If the warning light stays on together with the message shown
on the display and a buzzer, the power steering is ineffective
and the effort on the steering wheel increases significantly even
though the vehicle can be steered.
Contact a Fiat Dealership.
46
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
WARNING
30) If the
warning light turns on while driving (on certain versions together with the message on the display) stop the car immediately and
contact a Fiat Dealership.
31) The warning light
may not light up when the key is turned to MAR or stay on while travelling to indicate a retaining system fault. In this
case, the airbags or the pretensioners may not be activated in the case of an accident or (in a lesser number of cases) they may be activated
incorrectly. Before continuing, contact a Fiat Dealership to have the system checked immediately.
32) A failure of the
warning light is indicated by the
warning light flashing or, depending on the version, by the
icon turning on
continuously on the display. In this case, the
warning light may not indicate a possible problem with the airbag restraint system. Before
continuing, contact a Fiat Dealership to have the system checked immediately.
33) If the
warning light switches on when travelling (on certain versions together with the message on the display), stop the engine
immediately and contact a Fiat Dealership.
WARNING
9) If the warning light switches on, the degraded engine oil must be changed as soon as possible, and never more than 500 km from the first
time that the warning light switches on. Failure to observe the above may result in severe damage to the engine and invalidate the warranty.
The activation of this warning light is not related to the amount of oil in the engine. Therefore, never top up with oil when the warning light
starts flashing.
47
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Amber warning lights
What it means
What to do
amber
INJECTION SYSTEM FAULT (Multijet versions) - EOBD
ENGINE CONTROL SYSTEM FAULT (petrol versions)
In normal conditions, when the ignition key is turned to MAR
the warning light switches on, but it should switch off as soon
as the engine is started.
10)
Injection system failure
(Multijet versions)
If the warning light stays on or comes on when travelling, it
means there is a fault in the injection system which could
cause loss of performance, poor handling and high fuel
consumption levels.
On some versions the display shows the dedicated message.
Under these conditions, the vehicle can continue
travelling at moderate speed without demanding
excessive effort from the engine. Prolonged use of the
vehicle with the warning light on may cause damage.
48
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
EOBD engine management system failure
(petrol versions)
This indicates that the warning light is working correctly. If the
warning light stays on or turns on when travelling:
fixed: this means there is a fault in the supply/ignition
system which could cause high exhaust emissions, loss of
performance, poor handling and high fuel consumption levels.
On some versions the display shows the dedicated message.
Under these conditions, the vehicle can continue travelling at
moderate speed without demanding excessive effort from the
engine. Prolonged use of the vehicle with the warning light on
may cause damage.
blinking: this indicates possible damage to the catalytic
converter (see “EOBD system” in the “Knowing the instrument
panel” chapter). If the light is on and blinking, release the
accelerator pedal to lower the speed of the engine until the
warning light stops flashing.
If the light is fixed, contact a Fiat Dealership as soon as
possible. The warning light switches off if the
malfunction disappears, but is still stored by the
system.
If the light is blinking: continue the journey at moderate
speed, trying to avoid driving conditions that may cause
further flashing and contact a Fiat Dealership as soon
as possible.
amber
ABS FAILURE
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds.
The warning light will light up when the system is either not
working or not available. In this case the braking system
maintains its efficiency unaltered but without the advantage of
the ABS system.
On some versions the display shows the dedicated message.
Drive carefully and contact a Fiat Dealership as soon as
possible.
49
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
FUEL RESERVE
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds. The
warning light turns on when about 6 - 7 litres of fuel are left in
the tank.
The triangle on the right side of the symbol
indicates the
side of the vehicle with the fuel filler.
The warning light will blink to indicate a system fault. If
this is the case, go to a Fiat Dealership to have the
system checked.
amber
PLUG PREHEATING (Multijet versions) - PLUG PREHEATING
FAULT (Multijet versions)
Glow plugs
(Multijet versions)
This warning light switches on when the key is turned to MAR.
It will switch off as soon as the glow plugs have reached a
preset temperature.
IMPORTANT At high ambient temperatures the warning light
may stay on for an extremely short time.
Start the engine as soon as the warning light switches
off.
Glow plug preheating failure
(Multijet versions)
The warning light flashes if there is a fault in the preheating
system.
On some versions the display shows the dedicated message.
Contact a Fiat Dealership as soon as possible.
amber
WATER IN DIESEL FILTER (Multijet versions)
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds.
The
warning light switches to indicate presence of water in
the diesel filter.
On some versions the display shows the dedicated message.
11)
50
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
VEHICLE PROTECTION SYSTEM FAULT - FIAT CODE -
ALARM FAULT (for versions/markets, where provided - amber)
- BREAK-IN ATTEMPT
Fiat CODE Vehicle protection system fault
If, with the ignition key at MAR, the warning light stays on
permanently, this indicates a possible failure (see “Fiat Code
system” in the “Know your vehicle” section).
On some versions the display shows the dedicated message.
IMPORTANT Warning lights
and
will come on at the
same time to indicate a Fiat CODE system failure.
If with the engine running the warning light
flashes, the
vehicle is not protected by the engine immobiliser (see “Fiat
Code system” in section “Know your vehicle”).
Contact a Fiat Dealership to have all the keys stored in
the memory.
Alarm fault
(for versions/markets, where provided)
A fault with the alarm system is signalled by this warning light
(or symbol in the display) coming on. A specific message
is displayed on certain versions.
Contact a Fiat Dealership as soon as possible.
Break-in attempt
The warning light will blink rapidly or the symbol will appear on
the display to indicate a break-in attempt. A specific message
is displayed on certain versions.
Contact a Fiat Dealership as soon as possible.
51
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
GENERAL FAILURE INDICATION
The warning light turns on in the following circumstances:
Engine oil pressure sensor failure
The warning light switches on when an engine oil pressure
sensor anomaly is detected.
Contact a Fiat Dealership as soon as possible to have
the fault fixed.
Exterior lights failure:
On certain versions, the warning light will come on when a
failure to one of the following lights is detected:
side lights;
brake lights;
rear fog lamps;
direction indicators;
number plate lights.
On some versions the display shows the dedicated message.
The failure relating to these lights could be: one or more
blown bulbs, a blown protection fuse or a break in the
electrical connection.
52
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
Fuel cut-off inertia switch tripped
The warning light switches on when the fuel cut-off inertia
switch is tripped. The display shows the dedicated message.
Parking sensor failure
(for versions/markets, where provided)
See parking sensor warning light section.
In this case, the
warning light may not indicate a
possible problem with the airbag restraint system.
Before continuing, contact a Fiat Dealership to have the
system checked immediately.
Airbag failure warning light
The
warning light turns on and flashes to indicate a failure
of the
warning light. In this case, the
warning light may
not indicate a possible problem with the airbag restraint
system.
Before continuing, contact a Fiat Dealership to have the
system checked immediately.
Start&Stop system failure
(for versions/markets, where provided)
The warning light comes on alternatively to the warning light
when a Start&Stop system fault is detected.
In this case, contact the Fiat Service Network as soon
as possible.
53
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
DPF (PARTICULATE FILTER) CLEANING UNDERWAY
(for versions/markets, where provided)
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds.
The warning light switches on constantly to inform the driver
that the DPF system needs to eliminate the trapped pollutants
(particulate) through the regeneration process.
A specific message will appear on the display when the
warning light comes on (for versions/markets, where provided).
The warning light does not come on during every DPF
regeneration, but only when driving conditions require
that the driver is notified. The warning light will go off if
the vehicle stays in motion until regeneration has been
completed. On average, the process lasts 15 minutes.
Optimum conditions for completing the process are
achieved by travelling at 60 km/h with engine revs
above 2000 rpm. If this warning light comes on, it does
not mean there is a vehicle defect, so there is no need
to take it to a garage.
34) 35)
amber
ESC SYSTEM
ESC system activation
Flashing of the warning light while driving indicates the
intervention of the ESC system.
ESC system failure
The warning light switches on when the ignition key is turned
to MAR, but it should switch off after a few seconds.
The display will show a dedicated message.
If the warning light does not go out or remains on whilst
driving, go to a Fiat Dealership.
amber
HILL HOLDER FAILURE
(for versions/markets, where provided)
When the key is turned to MAR, the warning light switches on,
but it should switch off after a few seconds; the warning light
indicates a Hill Holder system failure.
The display will show a dedicated message.
In this case, contact the Fiat Service Network as soon
as possible.
54
KNOWING
THE
INSTRUMENT
P
ANEL
-------------------------------------------------------------------------------------------------------------------------------------------------------------
What it means
What to do
amber
iTPMS
iTPMS failure
The warning light flashes for about 75 seconds then stays on
constantly when a fault is detected in the iTPMS.
In this case, contact the Fiat Service Network as soon
as possible.
Tyre pressure low
The warning light switches on to indicate that the tyre pressure
is lower than the recommended value and/or that a pressure
loss is occurring. In these circumstances, optimal tyre duration
and fuel consumption may not be guaranteed.
In this case it is advisable to restore the correct
pressure value.
IMPORTANT Do not continue driving with one or more
flat tyres as vehicle handling may be compromised.
Stop the vehicle, avoiding sharp braking and steering.
amber
BRAKE PAD WEAR
The warning light switches on if the front brake pads are worn.
On certain versions a dedicated message is displayed.
Have them replaced as soon as possible.
amber
PARKING SENSOR FAILURE
(for versions/markets, where provided)
The warning light turns on when a parking sensor fault is
detected. On some versions, the
warning light comes on
instead. On certain versions a dedicated message is displayed.
In this case, contact the Fiat Service Network as soon
as possible.
amber
START&STOP SYSTEM FAILURE
(for versions/markets, where provided)
The warning light comes on when a fault is detected in the
Start&Stop system. On some versions, the
warning light
comes on instead. On certain versions a dedicated message is
displayed.
In this case, contact the Fiat Service Network as soon
as possible.
55
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст