Dodge Challenger (2019 year). Instruction — part 28

Setting Name

Selectable Options

Display Brightness With Headlights

OFF

+

–

NOTE:

• When in the “Display Brightness With Headlights OFF” display, you may select the brightness with the headlights

off. Adjust the brightness from (1–10) with the “+” and “–” buttons on the touchscreen.

• To make changes to the ⬙Display Brightness With Headlights OFF⬙ setting, the headlights must be off and the inte-

rior dimmer switch must not be in the

⬙party⬙ or ⬙parade⬙ positions.

Set Theme

List Of Themes

NOTE:
When in the “Set Theme” display, you may select the theme for the display screen. To make your selection, press the

⬙Set Theme⬙ button on the touchscreen, then select the desired theme option button until a check-mark appears show-
ing that the setting has been selected.

AutoShow Smartphone Display

Upon Connection — If Equipped

On

Off

Touchscreen Beep

On

Off

Controls Screen Time-Out — If

Equipped

On

Off

NOTE:
When the “Control Screen Time-Out” feature is selected, the controls screen will stay open for five seconds before the
screen times out. With the feature deselected, the screen will stay open until it is instructionly closed.

10

MULTIMEDIA

445

Setting Name

Selectable Options

Navigation Next Turn Pop-Ups Dis-

played In Cluster — If Equipped

On

Off

NOTE:
When the “Navigation Turn-By-Turn Displayed In Cluster” feature is selected, the turn-by-turn directions will appear
in the instrument cluster display as the vehicle approaches a designated turn within a programmed route.

Units

After pressing the “Units” button on the touchscreen, you
may select each unit of measure independently displayed
in the instrument cluster display, and navigation system (if
equipped). The following selectable units of measure are
listed below:

Setting Name

Selectable Options

Units

US

Metric

Custom

NOTE:

When the “Custom” setting is selected, units will appear according to your personally configured settings. To

configure these settings, press the “Custom” bar. The following settings will appear:

Speed

MPH

km/h

Distance

mi

km

Fuel Consumption

MPG (US)

MPG (UK)

L/100 km

km/L

Pressure

psi

kPa

bar

Temperature

°F

°C

446

MULTIMEDIA

Voice

After pressing the “Voice” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Voice Response Length

Brief

Detailed

Show Command List

Never

w/Help

Always

Clock & Date

After pressing the “Clock & Date” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Sync Time With GPS — If

Equipped

On

Off

NOTE:
The “Sync Time With GPS” feature will allow you to automatically have the radio set the time.

Set Time Hours

+

–

Set Time Minutes

+

–

Time Format

12 hrs

24 hrs

AM

PM

10

MULTIMEDIA

447

Setting Name

Selectable Options

Show Time In Status Bar — If

Equipped

On

Off

NOTE:
The “Show Time In Status Bar” feature will allow you to turn on or shut off the digital clock in the status bar.

Safety & Driving Assistance

After pressing the “Safety & Driving Assistance” button on
the touchscreen, the following settings will be available:

Setting Name

Selectable Options

ParkView Backup Camera

Delay

On

Off

NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image
with dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled
if the vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to
the OFF position.

448

MULTIMEDIA

Setting Name

Selectable Options

Active ParkView Backup

Camera Guidelines

On

Off

NOTE:
The “Active ParkView Backup Camera Guidelines” feature overlays the Rear Backup Camera image with active, or
dynamic, grid lines to help illustrate the width of the vehicle and its projected back up path, based on the steering
wheel position when the option is checked. A dashed center line overlay indicates the center of the vehicle to assist
with parking or aligning to a hitch/receiver.

Forward Collision Warn-

ing Sensitivity — If

Equipped

Near

Far

NOTE:
The “Forward Collision Warning Plus (FCW+) Sensitivity” setting determines at what relative distance the vehicle
directly in front of you needs to be at, before the system will warn you of a possible collision with the vehicle directly
in front of you, based on the option is selected. “Far” will give you the most amount of reaction time, whereas
“Near” will give you the least amount of reaction time, based on the distance between the two vehicles.

Forward Collision Warn-

ing — If Equipped

On

Off

NOTE:
Changing the FCW status to “Off” prevents the system from warning you of a possible collision with the vehicle in
front of you.

10

MULTIMEDIA

449

Setting Name

Selectable Options

The FCW system state is kept in memory from one ignition cycle to the next. If the system is turned OFF, it will re-
main off when the vehicle is restarted.

Forward Collision Warn-

ing Active Braking — If

Equipped

On

Off

NOTE:
The “Forward Collision Warning Plus (FCW+)” setting includes Advanced Brake Assist (ABA). The ABA applies ad-
ditional brake pressure when the driver requests insufficient brake pressure to avoid a potential frontal collision.

Electric Power Steering
Default — If Equipped

Sport

Normal

Comfort

NOTE:
When

⬙Electric Power Steering Default⬙ is selected, it allows you to change the default setting of your vehicle to either

normal, sport, or comfort.

ParkSense — If Equipped

Sound Only

Sound & Display

NOTE:
The ParkSense system will scan for objects behind the vehicle when the gear selector is in REVERSE and the vehicle
speed is less than 7 mph (11 km/h). It will provide an alert (audible and/or visual) to indicate the proximity to other
objects. The system can be enabled with Sound Only, or Sound and Display.

450

MULTIMEDIA

Setting Name

Selectable Options

Rear ParkSense Volume —

If Equipped

Low

Med

High

NOTE:
The Rear ParkSense Chime Volume settings can be selected from the instrument cluster display or Uconnect System.
The chime volume settings include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM. To
make your selection, press the “Rear ParkSense Vol.” button on the touchscreen, until a check-mark appears next to
setting, indicating that the setting had been selected. ParkSense will retain its last known configuration state through
ignition cycles.

Blind Spot Alert — If

Equipped

Off

Lights

Lights & Chime

NOTE:

• When this feature is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible, to indicate objects

in your blind spot. The Blind Spot Alert feature can be activated in “Lights” mode. When this mode is selected, the
Blind Spot Monitor (BSM) system is activated and will only show a visual alert in the exterior mirrors. When
“Lights & Chime” mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the exterior mirrors
as well as an audible alert when the turn signal is on. When “Off” is selected, the Blind Spot Monitor (BSM) sys-
tem is deactivated.

• If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not dam-

aged, the sensor may have become misaligned. Take your vehicle to an authorized dealer to verify sensor align-
ment. Having a sensor that is misaligned will result in the BSM not operating to specification.

10

MULTIMEDIA

451

Setting Name

Selectable Options

Hill Start Assist — If

Equipped

On

Off

NOTE:
When this feature is selected, the Hill Start Assist (HSA) system is active.

Paddle Shifters

On

Off

Mirrors & Wipers

After pressing the “Mirror and Wipers” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Rain Sensing Auto Wipers

On

Off

NOTE:
When this feature is selected and the wipers are on, the system will automatically activate the windshield wipers if it
senses moisture on the windshield.

Headlights with Wipers

On

Off

452

MULTIMEDIA

Lights

After pressing the “Lights” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Headlight Off Delay

0

30

60

90

Headlight Illumination On

Approach

0

30

60

90

Headlights With Wipers — If

Equipped

On

Off

Auto Dim High Beams — If

Equipped

On

Off

Daytime Running Lights —

If Equipped

On

Off

Steering Directed Lights — If

Equipped

On

Off

Flash Lights With Lock

On

Off

10

MULTIMEDIA

453

Doors & Locks

After pressing the “Doors & Locks” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Auto Door Locks — If

Equipped

On

Off

Auto Unlock On Exit

On

Off

NOTE:
When the “Auto Unlocks On Exit” feature is selected, all doors unlock when the vehicle is stopped, the transmission
is in the PARK or NEUTRAL position and the driver’s door is opened.

Flash Lights With Lock

On

Off

NOTE:
When the “Flash Lights With Lock” feature is selected, the exterior lights flash when the doors are locked or un-
locked with the key fob, or when using the passive entry feature. This feature may be selected with or without the
“Sound Horn on Lock” feature selected.

Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote

Start — If Equipped

On

Off

454

MULTIMEDIA

Setting Name

Selectable Options

1st Press Of Key Fob Un-

locks

Driver Door

All Doors

NOTE:

• When ⬙Driver Door⬙ is selected with 1st Press Of Key Fob Unlocks, only the driver’s door unlocks with the first

press of the key fob unlock button. You must press the key fob unlock button twice to unlock the passenger’s
doors. When

⬙All Doors⬙ is selected for 1st Press Of Key Fob Unlocks, all doors unlock on the first press of the key

fob unlock button.

• If the vehicle is programmed 1st Press Of Key Fob Unlocks “All Doors,” all doors unlock no matter which Passive

Entry equipped door handle is grasped. If 1st Press Of Key Fob Unlocks “Driver Door” is programmed, only the
driver’s door unlocks when the driver’s door is grasped. With Passive Entry, if 1st Press Of Key Fob Unlocks
“Driver Door” is programmed, touching the handle more than once results in only the driver’s door opening. If
“Driver Door” is selected, once the driver door is opened, the interior door lock/unlock switch can be used to un-
lock all doors (or use key fob).

Passive Entry — If

Equipped

On

Off

NOTE:
The “Passive Entry” feature allows you to lock and unlock the vehicles door(s) without having to push the key fob
lock or unlock buttons. To make your selection, press the “Passive Entry” button on the touchscreen, until a check-
mark appears next to the setting, showing that the setting has been selected.

10

MULTIMEDIA

455

Setting Name

Selectable Options

Personal Settings Linked

To Key Fob — If

Equipped

On

Off

NOTE:

• This feature provides automatic recall of all settings stored to a memory location (driver’s seat, exterior mirrors,

power steering column position and radio station pre-sets) to enhance driver mobility when entering and exiting
the vehicle.

• The seat returns to the memorized seat location (if Personal Settings Linked to Key Fob is set to on) when the key

fob is used to unlock the door.

Auto Comfort Systems — If Equipped

After pressing the “Auto-On Comfort” button on the
touchscreen, the following settings will be available:

Setting Name

Selectable Options

Auto-On Driver Heated/

Vented Seat & Steering

Wheel

Off

Remote Start

All Starts

NOTE:
When this feature is selected the driver’s heated seat and heated steering wheel will automatically turn on when tem-
peratures are below 40° F (4.4° C). When temperatures are above 80° F (26.7° C) the driver vented seat will turn on.

456

MULTIMEDIA

Key Off Options

After pressing the “Key Off Options” button on the touch-
screen, the following settings will be available:

Setting Name

Selectable Options

Easy Exit Seat — If Equipped

On

Off

NOTE:
When the “Easy Exit Seat” feature is selected, the driver’s seat will automatically move rearward once the engine is
shut off.

Key Off Power Delay

0 sec

45 sec

5 mins

10 mins

NOTE:
When the “Key Off Power Delay” feature is selected, the power window switches, radio, Uconnect Phone system (if
equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for
up to ten minutes after the ignition is cycled to OFF. Opening either front door will cancel this feature. To change the
Key Off Power Delay setting, press the “+” or “-” button on the touchscreen to select your desired time interval, and
choose from “0 seconds,” “45 seconds,” “5 minutes” or “10 minutes.”

Headlight Off Delay

0 sec

30 sec

60 sec

90 sec

NOTE:
When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30,
60, or 90 seconds when exiting the vehicle. To change the Headlight Off Delay status press the “+” or “–” button on
the touchscreen to select your desired time interval.

10

MULTIMEDIA

457

Audio

After pressing the “Audio” button on the touchscreen, the
following settings will be available:

Setting Name

Selectable Options

Balance/Fade

“Speaker” Icon

Arrow Buttons

NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon, use
the arrows to adjust, or tap the “Speaker” icon to readjust to the center.

Equalizer

+

–

NOTE:

• The “Equalizer” feature allows you to adjust the Bass, Mid and Treble settings. Adjust the settings with the “+”

and “–” setting buttons on the touchscreen or by selecting any point on the scale between the “+” and “–” buttons
on the touchscreen.

• Bass/Mid/Treble allow you to simply slide your finger up or down to change the setting as well as press directly

on the desired setting.

Speed Adjusted Vol-

ume

Off

1

2

3

NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed. To change the Speed
Adjusted Volume press the “Off,” “1,” “2” or “3” button on the touchscreen.

458

MULTIMEDIA

Setting Name

Selectable Options

Surround Sound —

If Equipped

On

Off

NOTE:
The “Surround Sound” feature provides simulated surround sound mode. To make your selection, press the “Sur-
round Sound” button on the touchscreen, select “On” or “Off.”

AUX Volume Offset

— If Equipped

-3

+3

NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through
the AUX input. To make your selection, press the AUX Volume Match button on the touchscreen, choose a level from
–3 to +3.

Auto Play

On

Off

NOTE:
The “Auto Play” feature allows a media device to begin playing when the media device is plugged in. To make your
selection, press the On or Off buttons to activate or deactivate Auto Play.

10

MULTIMEDIA

459

Phone/Bluetooth Settings

After pressing the “Phone/Bluetooth Settings” button on
the touchscreen, the following settings will be available:

Setting Name

Selectable Options

Do Not Disturb

List of Settings

NOTE:
Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto
Reply Message (custom, default), and Custom Auto Reply Message (create message).

Paired Phones and Audio Sources

List Of Paired Phones and Audio Sources

NOTE:
The “Paired Phones and Audio Sources” feature shows which phones and audio sources are paired to the Phone and
Audio Sources Settings system. For further information, refer to the Uconnect Owner’s Instruction Supplement.

Smartphone Projection Manager

On

Off

NOTE:

Pressing “Smartphone Projection Manager” feature allows you to see a list of all connected phones and gives

you the option to determine which phone will be used for projection (Apple CarPlay or Android Auto).

460

MULTIMEDIA