Dodge 1500 (Gas) (2006 year). Instruction — part 31
FLUIDS, LUBRICANTS AND GENUINE PARTS
Engine
Component
Fluids, Lubricants and Genuine Parts
Engine Coolant
Mopar
威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Or-
ganic Additive Technology) or equivalent.
3.7/4.7L Engine Oil
Use SAE 5W-30, API Certified, meeting material standard MS-6395.
5.7L Engine Oil
Use SAE 5W-20, API Certified, meeting material standard MS-6395.
Engine Oil Filter
Mopar
威 Engine Oil Filter, P/N 5281090 or equivalent.
Spark Plugs
Refer to the Vehicle Emission Control Information label in the engine com-
partment.
Fuel Selection (all except 5.7L)
87 Octane, (R+M)/2 Method
Fuel Selection (5.7L)
89 Octane, (R+M)/2 Method, Mid-Grade Preferred (87 Octane acceptable)
MAINTAINING YOUR VEHICLE
485
7
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Chassis
Component
Fluids, Lubricants and Genuine Parts.
Automatic Transmission
Mopar
威 ATF+4, Automatic Transmission Fluid.
Transfer Case
Mopar
威 ATF+4, Automatic Transmission Fluid.
NVG 246 Automatic Transfer Case Only Mopar
威 PN 05179014AA, NVG 246 Automatic Transmission Fluid or
equivalent.
Manaul Transmission Fluid (G238)
Mopar
威 ATF+4, Automatic Transmission Fluid.
Instruction Transmission Fluid (G-56)
Mopar
威 ATF+4, Automatic Transmission Fluid.
Clutch Linkage
Multipurpose Grease, NLGI Grade 2 E.P. or equivalent.
1500 Model Front Axle (4X4)
GL-5 SAE 75W-90 (MS-9763) or equivalent.
1500 Model Rear Axle
Mopar
威 Synthetic Gear Lubricant SAE 75W-140 (MS-8985). Limited-Slip
Rear Axles on 1500 Models Require the addition of 118 ml (4 oz.) Mo-
par
威 limited slip additive or equivalent.
2500/3500 Model Front and Rear Axle
Synthetic, GL-5 SAE, 75W-90 or equivalent. Limited-Slip 10.5/11.5 inch
Rear Axles DO NOT REQUIRE a limited slip additive.
Brake Master Cylinder
Mopar
威 DOT 3 and SAE J1703 should be used or equivalent. If DOT 3
brake fluid is not available, then DOT 4 is acceptable. Use only recom-
mended brake fluids.
Power Steering Reservoir
Mopar
威 ATF+4, Automatic Transmission Fluid.
486
MAINTAINING YOUR VEHICLE
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MAINTENANCE SCHEDULES
CONTENTS
䡵 Emission Control System Maintenance . . . . . . . . 488
䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . . . 488
▫ Schedule “B” . . . . . . . . . . . . . . . . . . . . . . . . 491
▫ Schedule “A” . . . . . . . . . . . . . . . . . . . . . . . . 503
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
EMISSION CONTROL SYSTEM MAINTENANCE
The “Scheduled” maintenance services, listed in bold
type
in this section (Section 8) must be done at the times
or mileages specified to assure the continued proper
functioning of the emission control system. These, and all
other maintenance services included in this instruction,
should be done to provide best vehicle performance and
reliability. More frequent maintenance may be needed for
vehicles in severe operating conditions such as dusty
areas and very short trip driving.
Inspection and service also should be done any time a
malfunction is suspected.
NOTE:
Maintenance, replacement, or repair of the emis-
sion control devices and systems on your vehicle may be
performed by any automotive repair establishment or
individual using any automotive part which has been
certified pursuant to U.S. EPA or, in the State of Califor-
nia, California Air Resources Board regulations.
MAINTENANCE SCHEDULES
There are two maintenance schedules that show the
required
service for your vehicle.
First is Schedule “B”. It is for vehicles that are operated
under one or more of the following conditions that are
listed below and at the beginning of the schedule.
• Day or night temperatures are below 32° F (0° C).
• Stop and go driving.
• Extensive engine idling.
• Driving in dusty conditions.
• Short trips of less than 10 miles (16 km).
• More than 50% of your driving is at sustained high
speeds during hot weather, above 90° F (32°C).
• Trailer towing.
• Snowplowing.
488
MAINTENANCE SCHEDULES
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
• Heavy Loading.
• Taxi, police, or delivery service (commercial service).
• Off-road or desert operation.
• If equipped for and operating with E-85 (ethanol)
fuel.
NOTE:
If ANY of these apply to you then change your
engine oil every 3,000 miles (5 000 km) or 3 months,
whichever comes first and follow schedule “B” of the
⬙Maintenance Schedules⬙ section of this instruction.
NOTE:
If ANY of these apply to you then flush and
replace your engine coolant every 102,000 miles (170 000
km) or 60 months, whichever comes first and follow
schedule “B” of the
⬙Maintenance Schedules⬙ section of
this instruction.
NOTE:
Most vehicles are operated under the conditions
listed for Schedule
⬙B⬙.
Second is Schedule “A”. It is for vehicles that are not
operated under any of the conditions listed under Sched-
ule
⬙B⬙.
Use the schedule that best describes your driving condi-
tions. Where time and mileage are listed, follow the
interval that occurs first.
NOTE:
Under no circumstances should oil change in-
tervals exceed 6000 miles (10 000 km) or 6 months
whichever comes first.
CAUTION!
Failure to perform the required maintenance items
may result in damage to the vehicle.
MAINTENANCE SCHEDULES
489
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
At Each Stop for Fuel
• Check the engine oil level about 5 minutes after a fully
warmed engine is shut off. Checking the oil level while
the vehicle is on level ground will improve the accu-
racy of the oil level reading. Add oil only when the
level is at or below the ADD or MIN mark.
• Check the windshield washer solvent and add if
required. When refilling the washer fluid reservoir,
take some washer fluid and apply it to a cloth or towel
and wipe clean the wiper blades, this will help blade
performance.
Once a Month
• Check tire pressure and look for unusual wear or
damage.
• Inspect the battery and clean and tighten the terminals
as required.
• Check the fluid levels of coolant bottle, brake master
cylinder, and transmission and add as needed.
• Check all lights and all other electrical items for correct
operation.
At Each Oil Change
• Change the engine oil filter.
• Lubricate Drivetrain/Steering/Suspension Grease Fit-
tings (if equipped)
• Inspect the exhaust system.
• Inspect the brake hoses.
• Inspect the CV joints/U— joints (if equipped) and
front suspension components.
• Check the automatic transmission fluid level.
• Check the instruction transmission fluid level.
• Check the coolant level, hoses, and clamps.
• Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
490
MAINTENANCE SCHEDULES
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Schedule “B”
Follow schedule “B” if you usually operate your vehicle
under one or more of the following conditions.
• Day or night temperatures are below 32° F (0° C).
• Stop and go driving.
• Extensive engine idling.
• Driving in dusty conditions.
• Short trips of less than 10 miles (16 km).
• More than 50% of your driving is at sustained high
speeds during hot weather, above 90° F (32° C).
• Trailer towing.
• Snowplowing.
• Heavy Loading.
• Taxi, police, or delivery service (commercial service).
• Off-road or desert operation.
• If equipped for and operating with E-85 (ethanol)
fuel.
NOTE:
If ANY of these apply to you then change your
engine oil every 3,000 miles (5 000 km) or 3 months,
whichever comes first and follow schedule “B” of the
⬙Maintenance Schedules⬙ section of this instruction.
NOTE:
If ANY of these apply to you then flush and
replace your engine coolant every 102,000 miles (170 000
km) or 60 months, whichever comes first and follow
schedule “B” of the
⬙Maintenance Schedules⬙ section of
this instruction.
NOTE:
If none of these apply to you, then change your
engine oil at every interval shown on schedule
⬙A⬙ of the
⬙Maintenance Schedules⬙ section of this instruction.
SCHEDULE “B”
491
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
3,000
6,000
9,000
12,000
15,000
(Kilometers)
(5 000)
(10 000)
(15 000)
(20 000)
(25 000)
Change engine oil and engine oil filter at interval
shown or 3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500,
4X4).
X
X
X
X
X
Rotate tires.
X
X
Check spare tire for proper pressure and correct
stowage.
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) mod-
els only.
X
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Inspect brake linings.
X
Inspect engine air cleaner filter, replace if neces-
sary.
X
492
SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
18,000
21,000
24,000
27,000
30,000
(Kilometers)
(30 000)
(35 000)
(40 000)
(45 000)
(50 000)
Change engine oil and engine oil filter at interval shown or
3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
X
X
X
X
X
Rotate tires.
X
X
X
Check spare tire for proper pressure and correct stowage.
X
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) models only.
X
X
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Check transfer case fluid level (4X4).
X
Inspect brake linings.
X
Inspect engine air cleaner filter, replace if necessary.
X
Replace spark plugs.
X
Inspect PCV valve, replace as necessary. **
X
SCHEDULE “B”
493
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
33,000
36,000
39,000
42,000
45,000
(Kilometers)
(55 000)
(60 000)
(65 000)
(70 000)
(75 000)
Change engine oil and engine oil filter at interval
shown or 3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500,
4X4).
X
X
X
X
X
Rotate tires.
X
X
Check spare tire for proper pressure and correct
stowage.
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) mod-
els only.
X
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Inspect brake linings.
X
Inspect engine air cleaner filter, replace if neces-
sary.
X
494
SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
48,000
51,000
54,000
57,000
60,000
(Kilometers)
(80 000)
(85 000)
(90 000)
(95 000)
(100 000)
Change engine oil and engine oil filter at interval
shown or 3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500,
4X4).
X
X
X
X
X
Rotate tires.
X
X
X
Check spare tire for proper pressure and correct
stowage.
X
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) mod-
els only.
X
X
X
Flush and replace engine coolant at 60 months, or
102,000 miles (170 000 km) whichever comes first.
X
Drain and refill transfer case fluid (4X4).
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Change 6-spd instruction transmission fluid 2500/3500
models only.
X
SCHEDULE “B”
495
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
48,000
51,000
54,000
57,000
60,000
(Kilometers)
(80 000)
(85 000)
(90 000)
(95 000)
(100 000)
Inspect brake linings.
X
X
Inspect engine air cleaner filter, replace if neces-
sary.
X
Replace spark plugs.
X
Inspect and replace ignition cables if necessary.
X
Inspect PCV valve, replace as necessary. **
X
Drain and refill automatic transmission fluid and
change main sump filter*.
X
496
SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
63,000
66,000
69,000
72,000
75,000
(Kilometers)
(105 000)
(110 000)
(115 000)
(120 000)
(125 000)
Change engine oil and engine oil filter at interval
shown or 3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500,
4X4).
X
X
X
X
X
Rotate tires.
X
X
Check spare tire for proper pressure and correct
stowage.
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) mod-
els only.
X
X
Inspect engine air cleaner filter, replace if neces-
sary.
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Inspect brake linings.
X
Inspect auto tension drive belt and replace if re-
quired. (3.7L/4.7L/5.7L).
X
SCHEDULE “B”
497
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
78,000
81,000
84,000
87,000
90,000
(Kilometers)
(130 000) (135 000) (140 000) (145 000) (150 000)
Change engine oil and engine oil filter at interval shown or
3 months, whichever comes first.
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
X
X
X
X
X
Rotate tires.
X
X
X
Check spare tire for proper pressure and correct stowage.
X
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) models only.
X
X
X
Change rear axle fluid.
X
Change front axle fluid (4X4).
X
Check transfer case fluid level (4X4).
X
Inspect brake linings.
X
Inspect engine air cleaner filter, replace if necessary.
X
Replace spark plugs.
X
Inspect PCV valve, replace as necessary. **
X
Inspect auto tension drive belt and replace if required (3.7L/
4.7L/5.7L).****
X
498
SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
93,000
96,000
99,000
102,000
(Kilometers)
(155 000)
(160 000)
(165 000)
(170 000)
Change engine oil and engine oil filter at interval shown
or 3 months, whichever comes first.
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/3500, 4X4).
X
X
X
X
Rotate tires.
X
X
Check spare tire for proper pressure and correct stowage.
X
X
Lubricate outer tie rod ends 2500/3500 (4X4) models only.
X
X
Flush and replace engine coolant, if not replaced at 60
months.
X
Inspect brake linings.
X
SCHEDULE “B”
499
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Miles
105,000
108,000
111,000
114,000
117,000
120,000
(Kilometers)
(175 000)
(180 000)
(185 000) (190 000) (195 000) (200 000)
Change engine oil and engine oil filter at in-
terval shown or 3 months, whichever comes
first.
X
X
X
X
X
X
Lubricate Front Drive Shaft Fitting (2500/
3500, 4X4).
X
X
X
X
X
X
Rotate tires.
X
X
X
Check spare tire for proper pressure and cor-
rect stowage.
X
X
X
Lubricate outer tie rod ends 2500/3500 (4X4)
models only.
X
X
X
Drain and refill transfer case fluid (4X4).
X
Change rear axle fluid.
X
X
Change front axle fluid (4X4).
X
X
Change 6-spd manual transmission fluid
2500/3500 models only.
X
Inspect brake linings.
X
X
500
SCHEDULE “B”
8
M
A
I
N
T
E
N
A
N
C
E
S
C
H
E
D
U
L
E
S
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст