Toyota 4Runner (2020 year). Instruction — part 6
88
2. Instrument cluster
4RUNNER (U)
Tachometer
Displays the engine speed in revolutions per minute
Engine coolant temperature gauge
Displays the engine coolant temperature
Multi-information display
Presents the driver with a variety of vehicle data (
Fuel gauge
Displays the quantity of fuel remaining in the tank
Speedometer
Displays the vehicle speed
Odometer/trip meter display change button
Switches the trip information.
Odometer/trip meter display
Shift position and shift range
Displays the selected shift position or selected shift range (
Gauges and meters
The displayed content may differ depending on the type of
meter.
1
2
3
4
5
6
7
8
-------------------------------------------------------------------------------------------------------------------------------------------------------------
89
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
Switches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
The brightness of the instrument panel lights can be adjusted.
Brighter
Darker
■
The meters and display illuminate when
Vehicles without a smart key system
The engine switch is in the “ON” position.
Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■
The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully upward.
Changing the display
Instrument panel light control
1
2
NOTICE
■
To prevent damage to the engine and its components
●
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
●
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (
-------------------------------------------------------------------------------------------------------------------------------------------------------------
90
2. Instrument cluster
4RUNNER (U)
The multi-information display presents the driver with a variety of driv-
ing related data, such as the current outside temperature. The multi-
information display can also be used to change the display settings
and other settings.
Shift position and shift range (
Menu icon display area
Displays the following items.
When a menu icon is not selected, the outside temperature is displayed.
• Menu icons (
• Outside temperature (
Content display area
A variety of information can be displayed by selecting a menu icon. Addi-
tionally, warning or pop-up display will be displayed in some situations.
• Menu icon content (
• Warning message (
Odometer and trip meter
(
Indicators
(
Meter control switches
(
Multi-information display
Summary of functions
1
2
3
4
5
6
-------------------------------------------------------------------------------------------------------------------------------------------------------------
91
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
The multi-information display is operated using the meter control
switches.
Scroll screens
*
, change the
displayed content
*
and move
the cursor
Press: Enter/Set
Press and hold:
Reset/Display the next screen
Press: Displays the screen reg-
istered as the top screen
When no screen has been regis-
tered, the drive information screen
will be displayed.
Press and hold: Registers the
currently displayed screen as
the top screen
When the confirmation screen is displayed, select yes to register the
screen. If the selected screen cannot be registered, a registration failure
message will be shown.
Return to the previous screen
Call sending/receiving display
Linked with the hands-free system, sending or receiving call is displayed.
For details regarding the hands-free system, refer to the “Navigation sys-
tem owner's instruction”.
*
: When the screen can be scrolled or different content can be displayed, a
mark, such as an arrow, will be displayed to suggest which switch to oper-
ate.
Operating the meter control switches
1
2
3
4
5
-------------------------------------------------------------------------------------------------------------------------------------------------------------
92
2. Instrument cluster
4RUNNER (U)
Drive information
Select to display various drive data. (
Vehicle information display
Select to display the vehicle information. (
Navigation system-linked display (if equipped)
Select to display the following navigation system-linked information.
• Route guidance
• Compass display (north-up display/heading-up display)
Audio system-linked display (if equipped)
Select to enable selection of an audio source or track on the display
using the meter control switches.
Driving assist system information
Select to display the operational status of the following systems:
• Dynamic radar cruise control (
• LDA (Lane Departure Alert) (
Warning message display
Select to display warning messages and measures to be taken if a
malfunction is detected. (
• When there are no current warning messages, “No Messages” is
displayed.
• When there are multiple warning messages,
or
can be
used to switch the displayed warning message.
Settings display
Select to change the meter display settings and the operation set-
tings of some vehicle functions. (
Menu icons
-------------------------------------------------------------------------------------------------------------------------------------------------------------
93
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
Items displayed can be switched by pressing
or
up and down.
■
After Start
Average fuel economy
*
Displays the average fuel con-
sumption since the engine was
started.
Average vehicle speed
Displays the average vehicle
speed since the engine was
started.
Elapsed time
Displays the elapsed time since the engine was started.
*
: Use the displayed average fuel economy as a reference.
■
After Reset
Current fuel economy
Displays the current rate of fuel
consumption.
Average fuel economy
*
1,2
Displays the average fuel con-
sumption since the function was
reset.
Average speed
*
2
Displays the average vehicle
speed since the function was
reset.
Elapsed time
*
2
Displays the elapsed time since the function was reset.
*
1
: Use the displayed average fuel economy as a reference.
*
2
: Pressing and holding
will reset.
Drive information
1
2
3
1
2
3
4
-------------------------------------------------------------------------------------------------------------------------------------------------------------
94
2. Instrument cluster
4RUNNER (U)
■
After Refuel
Range
*
1,2
Displays the driving range with
remaining fuel.
Average fuel economy
*
2,3
Displays the average fuel con-
sumption since the vehicle was
refueled.
*
1
: This distance is computed
based on your average fuel con-
sumption. As a result, the actual
distance that can be driven may
differ from that displayed.
*
2
: When only a small amount of fuel is added to the tank, the display may
not be updated. When refueling, turn the engine switch off. If the vehicle
is refueled without turning the engine switch off, the display may not be
updated.
*
3
: Use the displayed average fuel economy as a reference.
■
Eco Indicator (Eco Driving Indicator Zone Display)
■
Speed
Displays the vehicle speed.
■
Vehicle sway warning
Detects the sway of the vehicle within a lane, which is often associ-
ated with a decrease in the driver’s attention level, and displays the
decrease in attention using a bar display.
The shorter the bar length, the more the driver may need to rest.
This display is a part of the LDA (Lane Departure Alert) system. The dis-
play is enabled when the operating conditions of the vehicle sway warn-
ing function are met. (
■
Blank screen (display off)
Drive information is not displayed.
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
95
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
Items displayed can be switched by pressing
or
up and down.
■
Steering angle
Displays the direction of the front tires.
The tire direction is displayed in 3 stages for both left and right, in accor-
dance with the angle of the tire.
If a battery terminal is disconnected and reconnected, the display may
be disabled temporarily. After driving the vehicle for a while, the display
will be enabled.
■
Tire inflation pressure
Displays inflation pressure of each tire.
The inflation pressure of the spare tire will be displayed. (if equipped)
The settings of some features can be changed by using the meter
control switches.
■
Setting procedure
On the setting screen, choose the desired item using
or
,
and then press
.
• For functions that can be enabled or disabled, the function switches
between on and off each time
is pressed.
• For functions that allow to select operation contents, display con-
tents, etc., the setting screen is displayed.
Select the desired setting by operating
or
, and then
press
.
To stop the selection, press
to return to the previous screen.
Vehicle information
Settings display
1
2
-------------------------------------------------------------------------------------------------------------------------------------------------------------
96
2. Instrument cluster
4RUNNER (U)
■
Setting items
●
LDA (Lane Departure Alert)
Select to set up LDA. (
• Alert sensitivity
• Sway warning
• Sway sensitivity
●
PCS (Pre-Collision System)
Select to set the following items. (
• PCS on/off
• PCS sensitivity
●
Intuitive parking assist (if equipped)
Select to set the Intuitive parking assist on/off
●
Vehicle settings
“TPWS” (Tire Pressure Warning System) (
• “Set Pressure”
Select to initialize the tire pressure warning system.
• “Change Wheel Set”
Select to register the ID codes of the tire pressure sensors to
the tire pressure warning system.3
●
Meter settings (
Select to set the following items.
• Language
Select to change the language on the display.
• Units
Select to change the unit for measure.
•
Eco Driving Indicator Light
Select to activate/deactivate the Eco Driving Indicator Light.
(
•
switch settings
You can register 1 screen as the top screen. To register, press
and hold
while the desired screen is displayed.
• Pop-up display
Select to set the pop-up displays (
P. 98), which may appear
in some situations, on/off.
• Initialization
Select to reset the meter display settings.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
97
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
■
Multi-terrain Select display
*
(if equipped)
■
Crawl Control display
*
(if equipped)
■
Outside temperature display
Displays the outside temperature
The temperature range that can be displayed is from -40 °F (-40 °C) to
122 °F (50 °C).
When the outside temperature drops below 37 °F (3 °C),
will
flash approximately 10 seconds, then stay on.
■
Customization
Settings (e.g. available language) can be changed.
(Customizable features:
*
: Automatically displayed when the system is used
■
Eco Driving Indicator
Other contents
Eco Driving Indicator Light
Eco Driving Indicator Zone Display
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on acceleration
If the acceleration exceeds Zone of Eco
driving, the right side of Eco Driving
Indicator Zone Display will illuminate.
Zone of Eco driving
Eco Driving Indicator will not operate
under the following conditions:
• The shift lever is in any position other
than D.
• The vehicle speed is approximately
80 mph (130 km/h) or higher.
• The Crawl Control is operating. (if
equipped) (
1
2
3
4
-------------------------------------------------------------------------------------------------------------------------------------------------------------
98
2. Instrument cluster
4RUNNER (U)
■
Pop-Up display
The pop-up display is displayed on the multi-information display according to
the operating conditions of the following functions:
●
Route guidance display of the navigation system-linked system (if equipped)
●
Incoming call display of the hands-free phone system
The pop-up display function can be disabled.
■
Tire inflation pressure
●
It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to IGNITION ON mode. It may also take a few min-
utes to display the tire inflation pressure after inflation pressure has been
adjusted.
●
“---” may be displayed if the tire information cannot be determined due to
unfavorable radio wave conditions.
●
Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
■
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change:
●
When the vehicle is stopped, or moving at low speeds (less than 12 mph [20
km/h])
●
When the outside temperature has changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
●
When “--” or “E” is displayed, the system may be malfunctioning. Take your
vehicle to Toyota dealer.
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
99
2. Instrument cluster
2
Instru
me
nt clu
ster
4RUNNER (U)
WARNING
■
Caution for use while driving
For safety, avoid operating the meter control switches while driving as much
as possible, and do not look continuously at the multi-information display
while driving. Stop the vehicle and operate the meter control switches. Fail-
ure to do so may cause a steering wheel operation error, resulting in an
unexpected accident.
■
Cautions while setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
■
The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the multi-informa-
tion display. At extremely low temperatures, the multi-information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or serious injury.
NOTICE
■
While setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
100
2. Instrument cluster
4RUNNER (U)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
101
Operation of
each component
3
4RUNNER (U)
Keys . . . . . . . . .. 102
Side doors. . . . . . . 110
Smart key system . . . . 118
Automatic running
Front seats . . . . . . 136
Rear seats. . . . . . . 139
Driving position
Steering wheel . . . . .. 156
Inside rear view mirror . .. 158
Outside rear view
Power windows . . . . . 162
Power back window . . .. 166
Moon roof. . . . . . .. 170
-------------------------------------------------------------------------------------------------------------------------------------------------------------
102
4RUNNER (U)
3-1. Key information
Vehicles without a smart key system
Master keys
Operating the wireless remote con-
trol function
Valet key
Key number plate
Vehicles with a smart key system
The following keys are provided with the vehicle.
Electronic keys
• Operating the smart key system
(
• Operating the wireless remote
control function
Mechanical keys
Key number plate
Keys
The keys
1
2
3
1
2
3
-------------------------------------------------------------------------------------------------------------------------------------------------------------
103
3-1. Key information
3
Op
eration
o
f each
compo
nen
t
4RUNNER (U)
Vehicles without a smart key system
Locks all the doors (
Unlocks all the doors (
Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.
Opens the windows and moon
roof (press and hold)
*
Sounds the alarm
(press and hold) (
*
: This setting must be customized at your Toyota dealer.
Vehicles with a smart key system
Locks all the doors (
Unlocks all the doors (
Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.
Opens the windows and moon
roof (press and hold)
*
Sounds the alarm
(press and hold) (
*
: This setting must be customized at your Toyota dealer.
Wireless remote control (if equipped)
1
2
3
4
1
2
3
4
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст