Toyota Camry (2019 year). Manual — part 36
561
8-1. Specifications
8
Vehi
cl
e specificatio
ns
CAMRY_U
Glossary of tire terminology
Tire related term
Meaning
Cold tire inflation pres-
sure
Tire pressure when the vehicle has been
parked for three hours or more, or has not
been driven more than 1 mile or 1.5 km under
that condition
Maximum
inflation
pressure
The maximum cold inflated pressure to which
a tire may be inflated, shown on the sidewall
of the tire
Recommended infla-
tion pressure
Cold tire inflation pressure recommended by a
manufacturer
Accessory weight
The combined weight (in excess of those stan-
dard items which may be replaced) of auto-
matic transmission, power steering, power
brakes, power windows, power seats, radio
and heater, to the extent that these items are
available as factory-installed equipment
(whether installed or not)
Curb weight
The weight of a motor vehicle with standard
equipment, including the maximum capacity of
fuel, oil and coolant, and if so equipped, air
conditioning and additional weight optional
engine
Maximum loaded vehi-
cle weight
The sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight
(d) Production options weight
Normal
occupant
weight
150 lb. (68 kg) times the number of occupants
specified in the second column of Table 1
*
that follows
Occupant distribution
Distribution of occupants in a vehicle as speci-
fied in the third column of Table 1
*
below
562
8-1. Specifications
CAMRY_U
Production
options
weight
The combined weight of installed regular pro-
duction options weighing over 5 lb. (2.3 kg) in
excess of the standard items which they
replace, not previously considered in curb
weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy
duty battery, and special trim
Rim
A metal support for a tire or a tire and tube
assembly upon which the tire beads are
seated
Rim diameter
(Wheel diameter)
Nominal diameter of the bead seat
Rim size designation
Rim diameter and width
Rim type designation
The industry manufacturer’s designation for a
rim by style or code
Rim width
Nominal distance between rim flanges
Vehicle
capacity
weight
(Total
load
capacity)
The rated cargo and luggage load plus 150 lb.
(68 kg) times the vehicle’s designated seating
capacity
Vehicle maximum load
on the tire
The load on an individual tire that is deter-
mined by distributing to each axle its share of
the maximum loaded vehicle weight, and
dividing by two
Vehicle normal load on
the tire
The load on an individual tire that is deter-
mined by distributing to each axle its share of
curb weight, accessory weight, and normal
occupant weight (distributed in accordance
with Table 1
*
below), and dividing by two
Weather side
The surface area of the rim not covered by the
inflated tire
Bead
The part of the tire that is made of steel wires,
wrapped or reinforced by ply cords and that is
shaped to fit the rim
Bead separation
A breakdown of the bond between compo-
nents in the bead
Tire related term
Meaning
563
8-1. Specifications
8
Vehi
cl
e specificatio
ns
CAMRY_U
Bias ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate
angles substantially less than 90 degrees to
the centerline of the tread
Carcass
The tire structure, except tread and sidewall
rubber which, when inflated, bears the load
Chunking
The breaking away of pieces of the tread or
sidewall
Cord
The strands forming the plies in the tire
Cord separation
The parting of cords from adjacent rubber
compounds
Cracking
Any parting within the tread, sidewall, or inner-
liner of the tire extending to cord material
CT
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and
the tire is designed to fit on the underside of
the rim in a manner that encloses the rim
flanges inside the air cavity of the tire
Extra load tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
Groove
The space between two adjacent tread ribs
Innerliner
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
Innerliner separation
The parting of the innerliner from cord material
in the carcass
Intended
outboard
sidewall
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asym-
metrical tire that has a particular side that
must always face outward when mounted
on a vehicle
Tire related term
Meaning
564
8-1. Specifications
CAMRY_U
Light truck (LT) tire
A tire designated by its manufacturer as pri-
marily intended for use on lightweight trucks
or multipurpose passenger vehicles
Load rating
The maximum load that a tire is rated to carry
for a given inflation pressure
Maximum load rating
The load rating for a tire at the maximum per-
missible inflation pressure for that tire
Maximum permissible
inflation pressure
The maximum cold inflation pressure to which
a tire may be inflated
Measuring rim
The rim on which a tire is fitted for physical
dimension requirements
Open splice
Any parting at any junction of tread, sidewall,
or innerliner that extends to cord material
Outer diameter
The overall diameter of an inflated new tire
Overall width
The linear distance between the exteriors of
the sidewalls of an inflated tire, including ele-
vations due to labeling, decorations, or protec-
tive bands or ribs
Passenger car tire
A tire intended for use on passenger cars,
multipurpose passenger vehicles, and trucks,
that have a gross vehicle weight rating
(GVWR) of 10,000 lb. or less.
Ply
A layer of rubber-coated parallel cords
Ply separation
A parting of rubber compound between adja-
cent plies
Pneumatic tire
A mechanical device made of rubber, chemi-
cals, fabric and steel or other materials, that,
when mounted on an automotive wheel, pro-
vides the traction and contains the gas or fluid
that sustains the load
Radial ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at substantially 90
degrees to the centerline of the tread
Reinforced tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
Tire related term
Meaning
565
8-1. Specifications
8
Vehi
cl
e specificatio
ns
CAMRY_U
*
: Table 1
Occupant loading and distribution for vehicle normal load for
various designated seating capacities
Section width
The linear distance between the exteriors of
the sidewalls of an inflated tire, excluding ele-
vations due to labeling, decoration, or protec-
tive bands
Sidewall
That portion of a tire between the tread and
bead
Sidewall separation
The parting of the rubber compound from the
cord material in the sidewall
Snow tire
A tire that attains a traction index equal to or
greater than 110, compared to the ASTM E-
1136 Standard Reference Test Tire, when
using the snow traction test as described in
ASTM F-1805-00, Standard Test Method for
Single Wheel Driving Traction in a Straight
Line on Snow-and Ice-Covered Surfaces, and
which is marked with an Alpine Symbol (
)
on at least one sidewall
Test rim
The rim on which a tire is fitted for testing, and
may be any rim listed as appropriate for use
with that tire
Tread
That portion of a tire that comes into contact
with the road
Tread rib
A tread section running circumferentially
around a tire
Tread separation
Pulling away of the tread from the tire carcass
Treadwear indicators
(TWI)
The projections within the principal grooves
designed to give a visual indication of the
degrees of wear of the tread
Wheel-holding fixture
The fixture used to hold the wheel and tire
assembly securely during testing
Tire related term
Meaning
566
8-1. Specifications
CAMRY_U
Designated seating
capacity, Number of
occupants
Vehicle normal load,
Number of occupants
Occupant distribution
in a normally loaded
vehicle
2 through 4
2
2 in front
5 through 10
3
2 in front, 1 in second
seat
11 through 15
5
2 in front, 1 in second
seat, 1 in third seat, 1
in fourth seat
16 through 20
7
2 in front, 2 in second
seat, 2 in third seat, 1
in fourth seat
567
CAMRY_U
8
Vehi
cl
e specificatio
ns
8-2. Customization
When customizing vehicle features, ensure that the vehicle is parked
in a safe place with the shift lever in P and the parking brake set.
■
Changing on the audio system screen
Press the “MENU” button.
Select “Setup” on the “Menu” screen.
Select “General” or “Vehicle” on the “Setup” screen.
Various setting can be changed. Refer to the list of settings that can
be changed for details.
■
Changing using the multi-information display
P. 100, 112
Customizable features
Your vehicle includes a variety of electronic features that can be
personalized to suit your preferences. The settings of these fea-
tures can be changed using the multi-information display, on the
audio system screen, or at your Toyota dealer.
Customizing vehicle features
1
2
3
568
8-2. Customization
CAMRY_U
Some function settings are changed simultaneously with other func-
tions being customized. Contact your Toyota dealer for further details.
Settings that can be changed on the audio system screen
Settings that can be changed by your Toyota dealer
Definition of symbols: O = Available, — = Not available
■
Gauges, meters and multi-information display (
*
: The default setting varies according to country.
Customizable features
1
2
Function
Default setting
Customized setting
Language
English
French
O —
Spanish
Units
*
miles (MPG US)
miles (MPG Imperial)
O —
km (L/100 km)
km (km/L)
Convenience services
(Suggestion function)
On
On
(when the vehicle is
stopped)
O O
Off
1
2
569
8-2. Customization
CAMRY_U
8
Vehi
cl
e specificatio
ns
■
Door lock (
*
: Vehicles with a smart key system
■
Smart key system
*
and wireless remote control
(
*
: If equipped
Function
Default setting
Customized setting
Unlocking using a key
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors unlocked in
one step.
— O
Automatic door lock
Shift position
linked door lock-
ing operation
Off
O O
Speed linked door
locking operation
Automatic door unlock
Shift position
linked door
unlocking opera-
tion
Off
O O
Driver’s door linked
door unlocking oper-
ation
Locking/unlocking of the
trunk when all doors are
locked/unlocked
*
On
Off
— O
1
2
Function
Default setting
Customized setting
Operation buzzer vol-
ume
5
Off to 7
O O
Operation signal
(Emergency flashers)
On
Off
O O
Time elapsed before
automatic
door
lock
function is activated if
door is not opened after
being unlocked
60 seconds
Off
O O
30 seconds
120 seconds
Open
door
warning
buzzer
On
Off
— O
1
2
570
8-2. Customization
CAMRY_U
■
Smart key system
*
(
*
: If equipped
■
Wireless remote control (
Function
Default setting
Customized setting
Smart key system
On
Off
— O
Smart door unlocking
Driver’s door
All the doors
O O
Time elapsed before
unlocking all the door
when gripping and hold-
ing the driver’s door han-
dle
2 seconds
Off
— O
Number of consecutive
door lock operations
2 times
As many as desired — O
1
2
Function
Default setting
Customized setting
Wireless remote control
On
Off
— O
Unlocking operation
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors unlocked in
one step
O O
Trunk unlocking opera-
tion
Press and hold
(short)
One short press
— O
Push twice
Press and hold (long)
Off
Panic function
On
Off
— O
Reservation lock
On
Off
O O
1
2
571
8-2. Customization
CAMRY_U
8
Vehi
cl
e specificatio
ns
■
Power windows, and moon roof
*
or panoramic moon roof
*
(
*
: If equipped
■
Moon roof
*
(
*
: If equipped
■
Automatic light control system (
Function
Default setting
Customized setting
Key linked operation
Off
On
— O
Wireless remote control
linked operation
Off
On (open only)
— O
Wireless remote control
linked operation signal
(buzzer)
On
Off
— O
1
2
Function
Default setting
Customized setting
Linked operation of com-
ponents when key is
used (open only)
Slide only
Tilt only
— O
Linked operation of com-
ponents when wireless
remote control is used
Slide only
Tilt only
— O
1
2
Function
Default setting
Customized setting
Light sensor sensitivity
Standard
-2 to 2
O O
Time elapsed before
headlights automatically
turn off after doors are
closed
30 seconds
Off
O O
60 seconds
90 seconds
1
2
572
8-2. Customization
CAMRY_U
■
Lights (
P. 227)
■
Intuitive parking assist
*
(
*
: If equipped
■
BSM (Blind Spot Monitor)
*
(
*
:
If equipped
■
RCTA (Rear Cross Traffic Alert)
*
(
*
:
If equipped
Function
Default setting
Customized setting
Daytime running light
system (except Canada)
On
Off
O O
Windshield wiper linked
headlight illumination
On
Off
— O
1
2
Function
Default setting
Customized setting
Detection distance of the
front center sensor
Far
Near
— O
Detection distance of the
rear center sensor
Far
Near
— O
Buzzer volume
2
1 to 3
— O
1
2
Function
Default setting
Customized setting
Outside rear view mirror
indicator brightness
Bright
Dim
— O
1
2
Function
Default setting
Customized setting
Buzzer volume
2
1 to 3
— O
1
2
573
8-2. Customization
CAMRY_U
8
Vehi
cl
e specificatio
ns
■
Automatic air conditioning system
*
(
*
: If equipped
■
Illumination (
P. 380)
*
1
: Vehicles with a smart key system
*
2
: If equipped
Function
Default setting
Customized setting
A/C auto switch opera-
tion
Auto
Manual
O O
1
2
Function
Default setting
Customized setting
Time elapsed before
lights turn off
15 seconds
Off
O O
7.5 seconds
30 seconds
Vehicles without smart
key system: Operation
after the engine switch
turned to the “LOCK”
position
Vehicles with smart key
system: Operation after
the engine switch turned
off
On
Off
— O
Operation
when
the
doors are unlocked
On
Off
— O
Operation when you
approach the vehicle
with the electronic key
on your person
*
1
On
Off
— O
Footwell lights
*
2
On
Off
— O
Instrument panel orna-
ment light
*
2
and inside
door handle lights
*
2
On
Off
— O
1
2
574
8-2. Customization
CAMRY_U
WARNING
■
During customization
As the engine needs to be running during customization, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such
as a garage, exhaust gases including harmful carbon monoxide (CO) may
collect and enter the vehicle. This may lead to death or a serious health
hazard.
NOTICE
■
During customization
To prevent battery discharge, ensure that the engine is running while cus-
tomizing features.
575
CAMRY_U
8
Vehi
cl
e specificatio
ns
8-3. Items to initialize
*
:
If equipped
Items to initialize
The following items must be initialized for normal system opera-
tion after such cases as the battery being reconnected, or main-
tenance being performed on the vehicle:
Item
When to initialize
Reference
Message indicating mainte-
nance is required
(on some models)
• After the maintenance is per-
formed
Tire pressure warning sys-
tem
• When the tire inflation pres-
sure is changed such as
when changing traveling
speed or load weight
• When the tire inflation pres-
sure is changed such as
when the tire size is
changed
• When rotating the tires
• After performing the trans-
mitter ID code registration
procedure
Intelligent Clearance Sonar
(ICS)
*
• After reconnecting or chang-
ing the battery
576
8-3. Items to initialize
CAMRY_U
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст