Toyota C-HR (2019 year). Manual — part 7
97
2
Instru
■
G Monitor
■
Ending display
When the engine switch is turned off, each of the following will be displayed
on the multi-information display, and will extinguish after approximately
30 seconds.
●
Elapsed time
●
Distance
●
Average fuel consumption
The following item is displayed.
G-force display
Displays the current G-force state.
98
WARNING
■
Caution for use while driving
●
When operating the multi-information display while driving, pay extra
attention to the safety of the area around the vehicle.
●
Do not look continuously at the multi-information display while driving as
you may fail to see pedestrians, objects on the road, etc. ahead of the
vehicle.
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
For example, there is a lag between the driver’s shifting and the new gear
number appearing on the display. This lag could cause the driver to down-
shift again, causing rapid and excessive engine braking and possibly an
accident resulting in death or injury.
■
Cautions during setting up the display
As the engine needs to be running during setting up the display, ensure that
the vehicle is parked in a place with adequate ventilation. In a closed area
such as a garage, exhaust gases including harmful carbon monoxide (CO)
may collect and enter the vehicle. This may lead to death or a serious
health hazard.
NOTICE
■
While setting up the display
To prevent battery discharge, ensure that the engine is running while setting
up the display features.
99
2
Instru
Fuel consumption information
Fuel consumption information can be displayed on the audio/
visual system screen.
100
Press the “MENU” button.
Select “Info” on the “Menu”
screen.
Select “ECO” on the “Infor-
mation” screen.
If the “History” screen is dis-
played, select “Trip Information”.
Resetting the consumption
data
Average vehicle speed since
the engine was started
Elapsed time since the
engine was started
Fuel consumption in the past
15 minutes
Cruising range (
P. 101)
Current fuel consumption
Average fuel consumption for the past 15 minutes is divided by
color into past averages and averages attained since the engine
switch was last turned to the “ON” position (vehicles without a
smart key system) or IGNITION ON mode (vehicles with a smart
key system). Use the displayed average fuel consumption as a ref-
erence.
This image is an example only.
Trip information
1
2
3
101
2
Instru
Press the “MENU” button.
Select “Info” on the “Menu” screen.
Select “ECO” on the “Information” screen.
If the “Trip Information” screen is displayed, select “History”.
Resetting the past record
data
Best recorded fuel consump-
tion
Current fuel economy
Previous fuel consumption
record
Entune Audio and Entune Audio Plus
Displays the daily average fuel consumption. (Instead of the date,
“Trip 1” through “Trip 5” will be displayed.)
Entune Premium Audio
Displays the daily average fuel consumption
Updating the average fuel consumption data
The average fuel consumption history is divided by color into past
averages and the average fuel consumption since the last updated.
Use the displayed average fuel consumption as a reference.
This image is an example only.
■
Updating the past record data
Update the average fuel consumption by selecting “Clip” to measure the cur-
rent fuel consumption again.
■
Resetting the data
The fuel consumption data can be deleted by selecting “Clear”.
■
Cruising range
Displays the estimated maximum distance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on your average fuel consumption.
As a result, the actual distance that can be driven may differ from that dis-
played.
History
1
2
3
103
3
Operation of
each component
3-1. Key information
Keys . . . . . . . . .. 104
3-2. Opening, closing and
locking the doors
Side doors. . . . . . . 112
Back door. . . . . . .. 119
Smart key system . . . . 125
3-3. Adjusting the seats
Front seats . . . . . . 135
Rear seats. . . . . . . 136
Head restraints. . . . .. 138
3-4. Adjusting the steering
wheel and mirrors
Steering wheel . . . . .. 142
Inside rear view mirror . .. 144
Outside rear view
mirrors. . . . . . . . 146
3-5. Opening and closing
the windows
Power windows . . . . . 149
104
Keys
The following keys are provided with the vehicle.
Vehicles without a smart key system (type A)
Key (with a wireless remote
control function)
Operating the wireless remote con-
trol function
Key (without a wireless remote
control function)
Key number plate
Vehicles without a smart key system (type B)
Key (with a wireless remote
control function)
Operating the wireless remote con-
trol function
Key number plate
Vehicles with a smart key system
Electronic keys
• Operating the smart key system
(
• Operating the wireless remote
control function
Mechanical keys
Key number plate
The keys
105
3-1. Key information
3
Op
eration
Vehicles without a smart key system
Locks all the doors
(
)
Sounds the alarm
(
)
Unlocks the door
(
Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.
Opens the windows
*
(
*
: These settings must be customized at your Toyota dealer.
Vehicles with a smart key system
Locks all the doors
(
)
Sounds the alarm
(
)
Unlocks the door
(
Pressing the button unlocks the
driver’s door. Pressing the button
again within 3 seconds unlocks the
other doors.
Opens the windows
*
(
*
: These settings must be customized at your Toyota dealer.
Press the button to open the key.
To stow, press the button then fold
the key.
Wireless remote control
Using the key (vehicles without a smart key system)
106
To take out the mechanical key,
slide the release lever and take
the key out.
The mechanical key can only be
inserted in one direction, as the
key only has grooves on one side.
If the key cannot be inserted in a
lock cylinder, turn it over and re-
attempt to insert it.
After using the mechanical key, store it in the electronic key. Carry the
mechanical key together with the electronic key. If the electronic key bat-
tery is depleted or the entry function does not operate properly, you will
need the mechanical key. (
■
Panic mode
■
If you lose your keys
New genuine keys can be made by your Toyota dealer using the other key
(vehicles without a smart key system) or mechanical key (vehicles with a
smart key system) and the key number stamped on your key number plate.
Keep the plate in a safe place such as your wallet, not in the vehicle.
Using the mechanical key (vehicles with a smart key system)
When
is pressed for longer than
about one second, an alarm will sound
intermittently and the vehicle lights will
flash to deter any person from trying to
break into or damage your vehicle.
To stop the alarm, press any button on the
key (with a wireless remote control func-
tion) or electronic key.
107
3-1. Key information
3
Op
eration
■
When riding in an aircraft
When bringing a key with wireless remote control function onto an aircraft,
make sure you do not press any buttons on the key while inside the aircraft
cabin. If you are carrying the key in your bag, etc., ensure that the buttons are
not likely to be pressed accidentally. Pressing a button may cause the key to
emit radio waves that could interfere with the operation of the aircraft.
■
Conditions affecting the operation of the smart key system or wireless
remote control
Vehicles without a smart key system
The wireless remote control function may not operate normally in the follow-
ing situations:
●
When the wireless key battery is depleted
●
Near a TV tower, electric power plant, gas station, radio station, large dis-
play, airport or other facility that generates strong radio waves or electrical
noise
●
When carrying a portable radio, cellular phone or other wireless communi-
cation devices
●
When multiple wireless keys are in the vicinity
●
When the wireless key is in contact with, or is covered by a metallic object
●
When a wireless key (that emits radio waves) is being used nearby
●
When the wireless key has been left near an electrical appliance such as a
personal computer
●
If window tint with a metallic content or metallic objects are attached to the
rear window
Vehicles with a smart key system
108
■
Key battery depletion
Vehicles without a smart key system
If the wireless remote control function does not operate, the battery may be
depleted. Replace the battery when necessary. (
Vehicles with a smart key system
●
The standard battery life is 1 to 2 years.
●
If the battery becomes low, an alarm will sound in the cabin when the engine
stops. (
●
As the electronic key always receives radio waves, the battery will become
depleted even if the electronic key is not used. The following symptoms indi-
cate that the electronic key battery may be depleted. Replace the battery
when necessary. (
• The smart key system or the wireless remote control does not operate.
• The detection area becomes smaller.
• The LED indicator on the key surface does not turn on.
The battery can be exchanged by the users. (
P. 386) However, as there
may be damage to the key when exchanging, it is recommended to have
the battery exchanged at your Toyota Dealer.
●
To avoid serious deterioration, do not leave the electronic key within 3 ft.
(1 m) of the following electrical appliances that produce a magnetic field:
• TVs
• Personal computers
• Cellular phones, cordless phones and battery chargers
• Recharging cellular phones or cordless phones
• Table lamps
• Induction cookers
■
When the key battery is fully depleted
P. 386
■
Confirmation of the registered key number (vehicles with a smart key
system)
The number of keys already registered to the vehicle can be confirmed. Ask
your Toyota dealer for details.
■
Customization
Settings (e.g. wireless remote control system) can be changed.
(Customizable features:
109
3-1. Key information
3
Op
eration
■
Certification for the wireless remote control
For vehicles sold in the U.S.A.
For vehicles sold in Canada
111
3-1. Key information
3
Op
eration
NOTICE
■
To prevent key damage
●
Do not drop the keys, subject them to strong shocks, or bend them.
●
Do not expose the keys to high temperatures for long periods of time.
●
Do not get the keys wet or wash them in an ultrasonic washer, etc.
●
Do not attach metallic or magnetic materials to the keys or place the keys
close to such materials.
●
Do not disassemble the keys.
●
Do not attach a sticker or anything else to the surface of the electronic key
and key (with a wireless remote control function).
●
Vehicles with a smart key system: Do not place the keys near objects that
produce magnetic fields, such as TVs, audio systems and induction cook-
ers, or medical electrical equipment, such as low-frequency therapy equip-
ment.
■
Carrying the electronic key on your person (vehicles with a smart key
system)
Carry the electronic key 3.9 in. (10 cm) or more away from electric appli-
ances that are turned on. Radio waves emitted from electric appliances
within 3.9 in. (10 cm) of the electronic key may interfere with the key, caus-
ing the key to not function properly.
■
In case of a smart key system malfunction or other key-related prob-
lems (vehicles with a smart key system)
Take your vehicle with all the electronic keys provided with your vehicle to
your Toyota dealer.
■
When an electronic key is lost (vehicles with a smart key system)
If the electronic key remains lost, the risk of vehicle theft increases signifi-
cantly. Visit your Toyota dealer immediately with all remaining electronic
keys that was provided with your vehicle.
112
3-2. Opening, closing and locking the doors
Side doors
◆
Entry function (vehicles with a smart key system)
Carry the electronic key to enable this function.
Grip the driver’s door handle
to unlock the door. Grip the
passenger’s door handle to
unlock all the doors.*
Make sure to touch the sensor
on the back of the handle.
The doors cannot be unlocked
for 3 seconds after the doors are
locked.
Touch the lock sensor (the indentation on the side of the front
door handle) to lock all the doors.
Check that the door is securely locked.
*
: The door unlock settings can be changed. (
◆
Wireless remote control
Vehicles without a smart key system
Locks all the doors
Check that the door is securely
locked.
Unlocks the door
Pressing the button unlocks the
driver’s door.
Pressing the button again within
3 seconds unlocks the other
doors.
Press and hold to open the windows
*
*
: These settings must be customized at your Toyota dealer.
Unlocking and locking the doors from the outside
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст