Toyota Urban Cruiser (2015 year). Manual — part 29
4-3. Do-it-yourself maintenance
Replacing light bulbs
■ Headlight
STEP
1
Unplug the connector and
remove the rubber cover.
STEP
2
Release the bulb retaining
spring.
STEP
3
Remove the bulb.
To install a new bulb, align the
tabs of the bulb with the cutouts
of the mounting hole.
STEP
4
When installing, reverse the steps listed.
420
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ Front fog light (if equipped)
STEP
1
Remove the fender liner bolts.
4
STEP
2
Partly remove the fender liner
and unplug the connector while
pushing the lock release.
STEP
3
Turn the bulb base counterclock-
wise.
STEP
4
When installing, reverse the steps listed.
421
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ Front position light
STEP
1
Turn the bulb base counterclock-
wise.
STEP
2
Remove the light bulb.
STEP
3
When installing, reverse the steps listed.
422
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ Front turn signal light
STEP
1
Turn the bulb base counterclock-
wise.
STEP
2
Remove the light bulb.
4
When installing, reverse the steps listed.
STEP
3
423
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ Stop/tail, rear turn signal and back-up light/rear fog light
STEP
1
Open the back door and remove
the cover.
Use a flathead screwdriver which
is wrapped with a cloth.
STEP
2
Turn the bulb bases counter-
clockwise.
STEP
3
Remove the light bulb.
Stop/tail light
Rear turn signal light
Back-up light/rear fog light
When installing, reverse the steps listed.
STEP
4
424
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ License plate light
STEP
1
Open the back door and remove
the cover.
Use a flathead screwdriver which
is wrapped with a cloth.
STEP
2
Turn the bulb bases counter-
clockwise.
4
STEP
3
Remove the light bulb.
STEP
4
When installing, reverse the steps listed.
■ Lights other than the above
If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
● Side turn signal lights
● High mounted stoplight
425
URBAN CRUISER_OM_OM52F47E_(EE)
4-3. Do-it-yourself maintenance
■ LED lights
The side turn signal lights and high mounted stoplight consist of a number of
LEDs. If any of the LEDs burn out, take your vehicle to any authorized
Toyota dealer or repairer, or another duly qualified and equipped
professional to have the light replaced.
■ Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional, for more information in the following situations:
● Large drops of water are built up on the inside of the lens.
● Water has built up inside the headlight.
CAUTION
■ Replacing light bulbs
● Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights.
The bulbs become very hot and may cause burns.
●Do not touch the glass portion of the light bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth
to avoid getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.
●Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
●Do not attempt to repair or disassemble light bulbs, connectors, electric
circuits or component parts.
Doing so may result in death or serious injury due to electric shock.
■ To prevent damage or fire
Make sure bulbs are fully seated and locked.
426
URBAN CRUISER_OM_OM52F47E_(EE)
When trouble arises
5
5-1.
Essential information
5-2.
Steps to take in an
Emergency flashers
428
emergency
If your vehicle needs
If a warning light turns on or
to be towed
429
a warning buzzer
sounds
439
If you think something
is wrong
437
If you have a flat tire
(vehicles with
Fuel pump shut off system
a spare tire)
449
(gasoline engine)
438
If you have a flat tire
(vehicles without
a spare tire)
464
If the engine
will not start
480
If you lose your keys
482
If you cannot operate
the back door opener
483
If the electronic key does
not operate properly
484
If the battery is
discharged
487
If your vehicle
overheats
493
If you run out of fuel
and the engine stalls
(diesel engine)
497
If the vehicle becomes
stuck
500
If your vehicle has to be
stopped in an
emergency
502
427
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is
involved in an accident.
Press the switch to flash all
the turn signal lights. To turn
them off, press the switch
once again.
NOTICE
■ To prevent battery discharge
Do not leave the emergency flashers on longer than necessary when the
engine is not running.
428
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional, such as a commercial towing service,
using a lift-type truck or a flat bed truck.
Use a safety chain system for all towing, and abide by all state/pro-
vincial and local laws.
2WD models: If towing your vehicle with a wheel-lift type truck from
the front, the vehicle’s rear wheels and axles must be in good condi-
tions. (→P. 432)
If they are damaged, use a towing dolly or flat bed truck.
4WD models: If towing your vehicle with a wheel-lift type truck, use a
towing dolly. (→P. 432)
Before towing
The following may indicate a problem with your transmission. Contact
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional, before towing.
● The engine is running, but the vehicle will not move.
5
● The vehicle makes an abnormal sound.
429
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
Emergency towing
If a tow truck is not available, in an emergency your vehicle may be
temporarily towed using a cable or chain secured to the emergency
towing eyelet. This should only be attempted on hard, surfaced roads
for short distances at low speeds.
A driver must be in the vehicle to steer and operate the brakes. The
vehicle’s wheels, drive train, axles, steering and brakes must be in
good condition.
430
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
Installing towing eyelet
STEP
1
Remove the eyelet cover using a
flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body, as shown in the
illustration.
STEP
2
Insert the towing eyelet into the
hole and tighten partially by
hand.
STEP
3
Tighten down the towing eyelet
securely using a wheel nut
5
wrench.
431
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
Towing with a sling-type truck
Towing with a wheel-lift type truck
From the front
2WD models
Release the parking brake.
4WD models
Use a towing dolly under the rear
wheels.
432
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
From the rear
2WD models: We recommend to
use a towing dolly under the front
wheels.
Vehicles without smart entry &
start system: When not using a
towing dolly, turn the engine
switch to the “ACC” position and
shift the shift lever to “N”.
Vehicles with smart entry & start
system: When not using a towing
dolly, turn the
“ENGINE START
STOP” switch to the ACCES-
SORY mode and shift the shift
lever to “N”.
4WD models: Use a towing dolly
under the front wheels.
5
433
URBAN CRUISER_OM_OM52F47E_(EE)
5-1. Essential information
Using a flat bed truck
If you use chains or cables to tie
down your vehicle, the angles
shaded in black must be 45°.
Do not overly tighten the tie
downs or the vehicle may be
damaged.
■ Before emergency towing
Vehicles without smart entry & start system
STEP
1
Put the shift lever in “N”.
STEP
2
Put the engine switch in the “ACC” (engine off) or “ON” position
(engine running).
STEP
3
Release the parking brake.
Vehicles with smart entry & start system
STEP
1
Put the shift lever in “N”.
STEP
2
The “ENGINE START STOP” switch must be in the ACCESSORY
mode (engine off) or IGNITION ON mode (engine running).
STEP
3
Release the parking brake.
■ Emergency towing eyelet location
→P. 449, 465
434
URBAN CRUISER_OM_OM52F47E_(EE)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст