Toyota Avalon Hybrid (2019 year). Manual — part 7
97
2. Instrument cluster
2
Instrument cluster
Odometer/trip meter (
P. 111)
Shift position (
Outside temperature (
P. 92)
Menu icons (
“ODO/TRIP” switch (
Meter control switches (
◆
Using the content display area
The content display area is operated using the meter control
switches.
Scroll screens
*
, change the
displayed content
*
and move
the cursor
Press: Enter/Set
Press and hold: Reset/Dis-
play the next screen
Return to the previous
screen
Pressing and holding the switch will display the first screen of the
selected menu icon.
*
: When the screen can be scrolled or different content can be displayed,
a mark, such as an arrow, will be displayed to suggest which switch to
operate.
◆
Using the odometer/trip meter
Items in this area are operated using the “ODO/TRIP” switch.
Press: Change displayed item
Each time the switch is pressed,
the displayed item will be
changed.
Press and hold: Reset
Display the desired trip meter
and press and hold the switch to
reset the trip meter.
Using the multi-information display
6
7
8
9
10
11
1
2
3
98
2. Instrument cluster
Select a menu icon to display its content.
Driving information (
Select to display the following:
• Speedometer/driving range
• Fuel consumption
• Eco guide
Driving assist system information
Select to perform the following:
Display the operational status of the following systems:
• Dynamic radar cruise control with full-speed range (
• LDA (Lane Departure Alert with steering control) (
Display the following navigation system-linked information (if equipped):
• Route guidance
• Compass display (heading-up display)
Audio system-linked display
Select to enable selection of an audio source or track on the multi-infor-
mation display using the meter control switches.
Vehicle information
Select to perform the following:
Display the following information:
• Energy monitor (
• Tire inflation pressure (
Enable/Disable the following systems:
• Parking assist (Intuitive parking assist) (if equipped) (
• BSM (Blind Spot Monitor) function (
• RCTA (Rear Cross Traffic Alert) function (
These functions can also be enabled/disabled on
.
Display the following information:
• Tachometer
Settings display (
Select to change the meter display settings and other settings.
Menu icons
99
2. Instrument cluster
2
Instrument cluster
Warning message display (
Select to display warning messages and measures to be taken if a mal-
function is detected.
100
2. Instrument cluster
■
Speedometer/driving range
• Speedometer
• Driving range
Displays the driving range with remaining fuel.
When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the power switch off. If the vehicle is refueled with-
out turning the power switch off, the display may not be updated.
This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
■
Fuel consumption
Current fuel consumption
Displays the instantaneous cur-
rent fuel consumption.
Average fuel economy (after
start)
Displays the average fuel con-
sumption since hybrid system
start.
*
1
Driving range
Displays the driving range with remaining fuel.
*
2, 3
Driving information (
)
1
2
3
101
2. Instrument cluster
2
Instrument cluster
Gadget
*
4
The following items can be displayed by changing the settings for gad-
get content and fuel economy type on
. (
Average fuel economy
Displayed item (listed below) can be changed on the fuel economy type
screen of
. (
● Total (after reset)
Displays the average fuel consumption since the display was reset.
*
1, 5
● Tank (after refuel)
Displays the average fuel consumption since the vehicle was refu-
eled.
*
1, 2
4
Displayable item
Content
Gadget
content
Fuel economy
type
Average
vehicle
speed
Trip
(after start)
Displays the average vehicle speed since
hybrid system start.
Total
(after reset)
Displays the average vehicle speed since the
display was reset.
*
5
Distance
Trip
(after start)
Displays the distance driven since vehicle
start.
Total
(after reset)
Displays the distance driven since the display
was reset.
*
5
Elapsed
time
Trip
(after start)
Displays the elapsed time since hybrid system
start.
Total
(after reset)
Displays the elapsed time since the display
was reset.
*
5
5
102
2. Instrument cluster
*
1
: Use the displayed fuel consumption as a reference only.
*
2
: When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the power switch off. If the vehicle is refueled with-
out turning the power switch off, the display may not be updated.
*
3
: This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
*
4
: The default setting is no display.
*
5
: This display can be reset by pressing and holding
while it is dis-
played.
103
2. Instrument cluster
2
Instrument cluster
■
Eco guide
The Eco guide displays a guide for eco-friendly acceleration and
scores which represent an evaluation of how the vehicle has been
driven ecologically in different states.
ECO Accelerator Guidance
Eco score
● ECO Accelerator Guidance
Eco area
Indicates that the vehicle is
being driven in an Eco-friendly
manner.
Power area
Indicates that the Eco-friendly
driving range is being exceeded
(during full power driving, etc.)
Eco driving ratio based on acceleration
Zone of Eco acceleration
Suggests a range in which Eco-friendly acceleration can be performed.
The zone of Eco acceleration changes according to situations, such as
starting off or cruising.
Eco-friendly acceleration can be achieved by keeping the Eco driving
ratio based on acceleration bar within the zone of Eco acceleration.
(
1
2
1
2
3
4
104
2. Instrument cluster
● Eco score
The following 3 Eco driving methods are evaluated in 5 levels:
Smooth start-off acceleration, driving without sudden acceleration,
and smooth stopping. When the vehicle is stopped, an Eco score
out of 100 points will be displayed.
Eco start status
Eco cruise status
Eco stop status
Score result
How to read the bar display:
• After the hybrid system is started, the Eco score will not be dis-
played until the vehicle speed exceeds approximately 12 mph
(20 km/h).
• The Eco score will be reset each time the hybrid system is
started.
• When the hybrid system is stopped, the total score of the current
trip will be displayed.
1
2
3
4
Not yet evaluated
Low
High
105
2. Instrument cluster
2
Instrument cluster
◆
Changing settings
Use the meter control switches on the steering wheel to change
settings.
Press
or
to select
.
Operate the switches to select a desired item.
Press or press and hold
.
The available settings will differ depending on if
is pressed or
pressed and held. Follow the instructions on the display.
◆
Setting items
■
LDA (Lane Departure Alert with steering control) (
Press and hold
to change the settings of the following items:
Settings display (
)
1
2
3
Item
Settings
Details
Steering assist
On
Select to enable/disable steering
wheel assistance.
Off
Alert sensitivity
(High)
Select to set the warning sensi-
tivity.
(Normal)
Sway warning
On
Select to enable/disable the vehi-
cle sway warning.
Off
Sway sensitivity
(High)
Select to set the vehicle sway
warning sensitivity.
(Medium)
(Low)
106
2. Instrument cluster
■
PCS (Pre-Collision System) (
Press
to enable/disable the pre-collision system.
Press and hold
to change the settings of the following item:
■
BSM (Blind Spot Monitor) (
Press
to enable/disable the Blind Spot Monitor function.
Press and hold
to change the settings of the following item:
Item
Settings
Details
PCS
On
Select to enable/disable the pre-
collision system.
Off
Item
Settings
Details
Warning sensitivity
(Warning timing)
(Far)
Select to change the warning
timing.
(Middle)
(Near)
Item
Settings
Details
BSM
On
Select to enable/disable the
Blind Spot Monitor function.
Off
Item
Settings
Details
Outside rear view
mirror
indicator
brightness
(Bright)
Select to change the brightness
of the outside rear view mirror
indicators.
(Dim)
107
2. Instrument cluster
2
Instrument cluster
■
RCTA (Rear Cross Traffic Alert) (
P. 271)
Press
to enable/disable the Rear Cross Traffic Alert function.
Press and hold
to change the settings of the following item:
■
ICS (Intelligent Clearance Sonar) (if equipped) (
Press
to enable/disable the Intelligent Clearance Sonar.
■
Parking assist (Intuitive parking assist) (if equipped)
(
Press
to enable/disable the Intuitive parking assist.
Press and hold
to change the settings of the following item:
Item
Settings
Details
RCTA
On
Select to enable/disable the Rear
Cross Traffic Alert function.
Off
Item
Settings
Details
RCTA buzzer vol-
ume
(Low)
Select to change the volume of
the RCTA buzzer.
(Medium)
(Loud)
Item
Settings
Details
ICS
On
Select to enable/disable the
Intelligent Clearance Sonar sys-
tem.
Off
Item
Settings
Details
Intuitive
parking
assist
On
Select to enable/disable the intui-
tive parking assist.
Off
Item
Settings
Details
Volume
(Low)
Select to change the volume of
the intuitive parking assist
buzzer.
(Medium)
(Loud)
108
2. Instrument cluster
■
HUD (Head-up display) (if equipped) (
Press
to enable/disable the head-up display.
Press and hold
to change the settings of the following items:
Item
Settings
Details
HUD
On
Select to enable/disable the
head-up display.
Off
Item
Settings
Details
HUD Brightness/Position
Select to adjust the brightness/
position of the head-up display.
• Press the
/
switch to
adjust the display brightness.
• Press the
/
switch to
adjust the display position.
HUD Driving sup-
port
Tachometer set-
tings
Select to change the display
between the following:
• Hybrid System Indicator
• Tachometer
• No content
Navigation
sys-
tem
Select to enable/disable head-up
display content.
Driving Assist
Compass
Rotation
Select to adjust the angle of the
head-up display.
Press the
/
switch to
adjust the display angle.
109
2. Instrument cluster
2
Instrument cluster
■
Vehicle settings
Press and hold
to change the settings of the following items:
Item
Settings
Details
TPWS (Tire pressure warning system) (
Set pressure (tire pressure warning sys-
tem initialization)
Select to initialize the tire pres-
sure warning system. To per-
form initialization, press and hold
the
switch.
Before performing initialization,
make sure to adjust the inflation
pressure of each tire to the spec-
ified level. (
Change wheel (register tire pressure
warning system sensor ID codes)
Select to register the ID codes of
the tire pressure sensors to the
tire pressure warning system. To
register the ID codes, press and
hold the
switch.
(
Scheduled maintenance display
Maintenance data reset
Select to reset the message indi-
cating maintenance is required,
after the required maintenance is
performed. (
110
2. Instrument cluster
■
Meter settings
Press and hold
to change the settings of the following items:
*
1
: Selecting this item will only change the gadget.
*
2
: Selecting this item will turn the display of the gadget off.
Item
Settings
Details
Language
Select to change the language
displayed.
Units
Select to change the units of
measure displayed.
(EV indicator)
On
Select to enable/disable the EV
indicator. (
Off
Speedometer
On
Select to enable/disable the
speedometer display.
Off
Gadget content
Off
No display
Average vehicle
speed
Select to turn the display of a
gadget.
Distance
Elapsed time
Fuel economy type
Trip (after start)
*
1
Select to change the average
fuel consumption display and an
item to be displayed as gadget.
Total (after reset)
Tank
(after refuel)
*
2
Multi-information display off
Select to turn the multi-informa-
tion display off.
To turn the multi-information dis-
play on again, press any direc-
tion switch (
/
/
/
).
Pop-up display
Intersection guid-
ance (if equipped)
Select to enable/disable the pop-
up display.
Incoming calls
Brightness adjust-
ment
Default setting
Select to reset the meter display
settings to the default setting.
111
2. Instrument cluster
2
Instrument cluster
■
Odometer
Displays the total distance the vehicle has been driven.
■
Trip meter A/trip meter B
Displays the distance the vehicle has been driven since the meter
was last reset. Trip meters A and B can be used to record and dis-
play different distances independently.
To reset, display the desired trip meter and press and hold the “ODO/
TRIP” switch.
Odometer/trip meter
112
2. Instrument cluster
Displays suggestions to the driver in the following situations. To select
a response to a displayed suggestion, use the meter control switches.
The suggestion function can be turned on/off.
(Customizable features:
P. 522)
■
Suggestion to turn off the headlights
If the headlights are left on for a certain amount of time after the
power switch has been turned off, if the headlight switch is in the
“AUTO” position, a suggestion message will be displayed asking if
you wish to turn the headlights off. To turn the headlights off, select
“Yes”.
If a front door is opened after the power switch is turned off, this sugges-
tion message will not be displayed.
Suggestion function
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст