Toyota Prius C (2019 year). Manual — part 1
OVERVIEW
Instrument panel
Meter control switches
Audio control
switches2
Voice command
switch2
Telephone
Steering wheel controls
Cruise control switch
switch2
Headlight and turn signal controls
Windshield wiper and washer controls
Automatic High Beam (AHB) switch
Power outside rear view mirror controls
Instrument panel light control dial
Lane Departure Alert (LDA) switch
Pre-Collision System (PCS) switch
Fuel tank door release switch
Hood lock release lever
Tilt and telescopic steering lock release
Tire Pressure Monitoring (warning)
System (TPMS) reset button
Ignition switch1
Power button (Smart Key)1
2
1 If equipped.
2 For details, refer to the “Navigation and Multimedia System Owner’s Manual” and “2019
Entune™ Audio Quick Reference Guide.”
Emergency flasher button
Meters/Multi-Information Display (MID)
Audio/Navigation system1,2
Air conditioning controls
USB media/AUX port
LOWER CENTER CONSOLE SWITCHES
Vehicle Stability Control (VSC) OFF switch
“EV MODE” drive switch
“ECO MODE” drive switch
3
OVERVIEW
Instrument cluster
Transmission shift
Outside temperature
position indicator
Multi-Information Display
Speedometer
Clock
Average fuel consumption
Fuel gauge
Odometer/trip meter
Service indicators and reminders
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2, 2019 Owner’s
Manual.
AIR BAG ON/OFF indicator1
Airbag SRS warning1
Anti-lock Brake System (ABS) warning1
Arrow direction indicates fuel tank door position
Automatic High Beam (AHB) indicator1
Brake system warning1
Brake system warning light (yellow indicator)1
Cruise control/cruise control “SET” indicators
Driver and/or front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
4
Eco Mode indicator
Electric power steering system warning1
EV drive indicator
EV Drive Mode indicator
Headlight low/high
beam indicator
Immobilizer system indicator
Lane Departure Alert (LDA) indicator
Low fuel level warning
Low outside temperature indicator
Low tire pressure warning1
Malfunction/Check Engine indicator1
Master warning1,2
Parking brake warning
Pre-Collision System (PCS) warning1,2
READY indicator
Shift position indicator
Slip indicator/Hill-start Assist Control
indicator1,3
Turn signal indicator
Vehicle Stability Control
(VSC) OFF indicator1
1 If the
indicator does not turn off within a few seconds of starting the Hybrid system, there may be a
malfunction. Have the vehicle inspected by your Toyota dealer.
2 If the indicator flashes, there may be a malfunction. Refer to the Owner’s Manual.
3 If the indicator flashes, it indicates that the system is operating.
4 If equipped.
5
OVERVIEW
Keyless (and remote) entry
UNLOCKING OPERATION
Smart Key
Carry remote
Smart Key
Front door unlock*
Grasp
Push
ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
LOCKING OPERATION
Smart Key
Carry remote
Smart Key
All-door lock
Touch
Push
BACK DOOR LOCKING/UNLOCKING
Carry remote
Smart Key
Push to unlock
Push to lock
PANIC BUTTON
Smart Key
Push and hold
* Driver door unlocking function can be programmed to unlock driver door only,
or all doors. In some models, grasping front passenger door handle will unlock all
doors. Please refer to the Owner’s Manual for more details on how to program the
doors.
NOTE: Doors may also be locked/unlocked using remote.
6
Smart Key system (if equipped)
START FUNCTION
NOTE: The smart key must be carried to enable the start function. With the
Park position selected and the brake pedal depressed, push the “POWER”
switch.
POWER (WITHOUT STARTING HYBRID SYSTEM)
Without depressing the brake pedal, pressing the “POWER” switch will change the
operation mode in succession from:
POWER ON
Accessory - Some electrical components can be used.
POWER ON
On - All electrical components can be used.
Off - All systems OFF. Emergency flashers can be used.
Fuel tank door release & cap
Turn to open
Pull
Store
NOTE: Tighten until one click is heard. If the cap is not locked or tightened,
Check Engine “
” indicator may illuminate.
7
OVERVIEW
Hood release
Pull
Pull up latch and
raise hood
Engage support rod
Instrument panel light control
+
Brightness
control
-
8
Engine maintenance
Windshield washer fluid tank
Engine oil filler cap
Engine oil level dipstick
Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer to the
“Warranty & Maintenance Guide.”
Maintenance reset light instructions can be found in “Maintenance Requirements
Chapter” in Owner’s Manual.
9
FEATURES & OPERATIONS
Hybrid Synergy Drive System
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline engine
and electric motor to provide the most efficient combination of power for the
vehicle. To conserve energy, when the brakes are applied the braking force
generates electricity which is then sent to the traction battery. In addition, the
engine shuts off when the vehicle is stopped. The benefits are better fuel economy,
reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the Hybrid System are
shown on the multi-information display or the Display Audio System.
TIPS FOR IMPROVED FUEL ECONOMY
-Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
-When possible, link trips to reduce engine cold starts.
-Avoid driving at speeds that are higher than necessary, especially on the highway.
-When possible, avoid sudden stops to maximize regenerative braking energy.
-Minimize use of the Air Conditioning.
STARTING THE HYBRID SYSTEM
(1) Put the shift lever in Park.
(2) Vehicles with Smart Key system:
Depress the brake pedal, and press the “POWER” switch briefly and firmly.
Vehicles without Smart Key system:
Depress the brake pedal, and turn the key to the “START” position.
(3) The “READY” light will blink. After a few seconds, when the light remains
steady and a beep sounds, you may begin driving.
10
Hybrid transmission
Park1
Reverse
Neutral
Drive
Engine brake2
1 The “POWER”/ignition switch must be “ON” and the brake pedal depressed to
shift from Park.
2 The engine brake is the equivalent of downshifting. Shift to “B” when engine
braking is desired (e.g. downhill driving, coasting to a stop).
Drive mode
ECO MODE
Push
Eco Mode helps achieve low fuel consumption during trips that involve frequent
accelerating and braking.
Refer to the Owner’s Manual for more details.
EV MODE
Push
EV Drive Mode allows the electric motor (traction motor), powered by the hybrid
battery (traction battery), to be used to drive the vehicle under certain driving
conditions.
11
FEATURES & OPERATIONS
Seats-Head restraints
FRONT (ADJUSTABLE TYPE)/REAR CENTER
Lock release button
REAR OUTBOARD
Lock release buttons
Seat adjustments-Front
Seatback angle
Height crank
Seat position (forward/backward)
(driver’s side; if equipped)
12
Seat-Folding down rear seat
SPLIT REAR SEATS
(1) Pull up
(2) Fold down
Steering lock release
Without Smart Key system
With Smart Key system
Turn
Turn
Turn
Push
When starting the hybrid system, the
“STEERING LOCK ACTIVE” will be
power switch may seem stuck in the
displayed on the multi-information
“LOCK” position. To free it, turn the
display. Check that the shift lever is
key while turning the steering wheel
set in P. Press the power switch while
slightly left and right.
turning the steering wheel left and right.
Windows-Power
Driver side
Window lock switch
Up
Down
Automatic operation (driver side only) Push the switch completely down or pull
it completely up and release to fully open or close. To stop the window partway,
operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
13
FEATURES & OPERATIONS
Lights & turn signals
HEADLIGHTS
Headlights
Parking lights
DRL
OFF
Low beam
High beam flasher
High beam
or
Auto High Beam*
Daytime Running Light (DRL) system Automatically turns on under certain
conditions to make vehicle more visible to other drivers. Not for use at night.
Automatic light cut off system Automatically turns lights off after a delay of 30
seconds, or the lock switch on remote may be pushed after locking.
Automatic High Beam (AHB) system Automatically switches between high
and low beams as appropriate to provide the most light possible and enhance
forward visibility.
Refer to Toyota Safety Sense™ C (TSS-C) in this guide or the Owner’s Manual for
more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for details.
TURN SIGNALS
Right turn
Lane change
Lane change
Left turn
14
Windshield wipers & washers
FRONT
Single wipe
Adjust frequency*
Interval wipe
Slow
Pull to wash and wipe
Fast
* Intermittent windshield wiper frequency adjustment Rotate to increase/
decrease wipe frequency. (if equipped)
REAR
Wash and wipe
Wipe
Interval wipe
Wash and wipe*
* The wipers will automatically operate a couple of times after the washer squirts.
15
FEATURES & OPERATIONS
Air conditioning/heating
Temperature setting display
Fan speed display
Airflow mode display
Automatic climate control ON
Adjusting the temperature setting will cause
the airflow vents, air intake and fan to adjust
Windshield defogger
automatically.
Recirculate cabin air
(outside air when OFF)
Rear window defogger
Airflow vent
In “
” mode, use outside air (“
” indicator
OFF) to reduce window fogging.
Fan speed control
Climate control OFF
Air Conditioning ON/OFF
Temperature selector dial
16
Auto lock/unlock
Automatic door locks can be programmed to operate in different modes, or turned
OFF.
Shift position linked door locking/unlocking function
-Doors lock when shifting from Park.
-Doors unlock when shifting into Park.
Speed linked door locking function
-Doors lock when the vehicle speed goes above approximately 12 mph.
Driver’s door linked door unlocking function
-(Vehicles without a Smart Key system) Doors unlock when the driver’s door is
opened within 45 seconds after the engine switch is set from “ON” to “ACC” or
“LOCK”.
-(Vehicles with a Smart Key system) Doors unlock when the driver’s door is opened
within 45 seconds after the “POWER” switch is set to OFF.
Refer to the Owner’s Manual for more details.
Door locks
Unlock
Lock
17
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст