Toyota Prius+ (2016 year). Manual — part 28
7-2. Steps to take in an emergency
459
■ If the hybrid system overheat warning light comes on or the
warning message indicating overheat is shown on the multi-
information display
1
Stop the vehicle in a safe place.
2
Stop the hybrid system and carefully lift the hood.
3
After the hybrid system has cooled down, inspect the hoses and
radiator core (radiator) for any leaks.
1
Radiator
2
Cooling fans
If a large amount of coolant
leaks, immediately contact
any authorized Toyota dealer
or repairer, or another duly
qualified and equipped pro-
fessional.
4
The coolant level is satisfactory if it is between the “F” and “L”
lines on the reservoir.
1
Reservoir
2
“F” line
3
“L” line
7
Add coolant if necessary.
5
Water can be used in an emer-
gency if coolant is unavailable.
If water was added in an emer-
gency, have the vehicle
inspected at any authorized
Toyota dealer or repairer, or
another duly qualified and
equipped professional as soon
as possible.
PRIUS +_OM_OM47B24E_(EE)
460
7-2. Steps to take in an emergency
After stopping the hybrid system and waiting for 5 minutes or
6
more, start the hybrid system and check for the instrument clus-
ter or multi-information display.
If the hybrid system overheat warning light does not turn off or
the message does not disappear:
Stop the hybrid system and contact any authorized Toyota dealer
or repairer, or another duly qualified and equipped professional.
If the hybrid system overheat warning light does not come on or
the message is not displayed:
The hybrid system temperature has dropped and the vehicle may
be driven normally.
However, if the warning light comes on again frequently or the message
appears again frequently, contact any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional.
WARNING
■ When inspecting under the hood of your vehicle
Observe the following precautions.
Failure to do so may result in serious injury such as burns.
●If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot.
● After the hybrid system has been turned off, check that the indicator on the
power switch and the “READY” indicator are off.
When the hybrid system is operating, the gasoline engine may automati-
cally start, or the cooling fan may suddenly operate even if the gasoline
engine stops. Do not touch or approach rotating parts such as the fan,
which may lead to fingers or clothing (especially a tie, a scarf or a muffler)
getting caught, resulting in serious injury.
●Do not loosen the coolant reservoir cap while the hybrid system and radia-
tor are hot.
High temperature steam or coolant could spray out.
PRIUS +_OM_OM47B24E_(EE)
7-2. Steps to take in an emergency
461
NOTICE
■ When adding engine/power control unit coolant
Add coolant slowly after the hybrid system has cooled down sufficiently.
Adding cool coolant to a hot hybrid system too quickly can cause damage to
the hybrid system.
■ To prevent damage to the cooling system
Observe the following precautions:
● Avoid contaminating the coolant with foreign matter (such as sand or dust
etc.).
●Do not use any coolant additive.
7
PRIUS +_OM_OM47B24E_(EE)
462
7-2. Steps to take in an emergency
If the vehicle becomes stuck
Carry out the following procedures if the tires spin or the vehicle
becomes stuck in mud, dirt or snow:
1
Set the parking brake and shift the shift position to P. Stop the
hybrid system.
2
Remove the mud, snow or sand from around the stuck tire.
3
Place wood, stones or some other material under the tires to help
provide traction.
4
Restart the hybrid system.
5
Shift the shift position to D or R, release the parking brake and
carefully apply the accelerator to free the vehicle.
WARNING
■ When attempting to free a stuck vehicle
If you choose to push the vehicle back and forth to free it, make sure the
surrounding area is clear to avoid striking other vehicles, objects or people.
The vehicle may also lunge forward or lunge back suddenly as it becomes
free. Use extreme caution.
■ When changing the shift position
Be careful not to change the shift position with the accelerator pedal
depressed.
Changing the shift position to any positions other than P or N may cause the
vehicle to accelerate abruptly, causing an accident and resulting in death or
serious injury.
NOTICE
■ To avoid damage to the hybrid transmission and other components
● Avoid spinning the wheels and depressing the accelerator pedal more
than necessary.
● If the vehicle remains stuck even after these procedures are performed,
the vehicle may require towing to be freed.
PRIUS +_OM_OM47B24E_(EE)
463
Vehicle specifications
8
8-1. Specifications
Maintenance data
(fuel, oil level, etc.)
464
Fuel information
475
8-2. Customization
Customizable features
477
8-3. Initialization
Item to initialize
483
PRIUS +_OM_OM47B24E_(EE)
464
8-1. Specifications
Maintenance data (fuel, oil level, etc.)
Dimensions and weights
Overall length
4645 mm (182.9 in.)
Overall width
1775 mm (69.9 in.)
1575 mm (62.0 in.)*2
Overall height*1
1600 mm (63.0 in.)*3
Wheelbase
2780 mm (109.4 in.)
1540 mm (60.6 in.)*4
Front
1530 mm (60.2 in.)*5
Tread
1545 mm (60.8 in.)*4
Rear
1535 mm (60.4 in.)*5
Gross vehicle mass
2115 kg (4663 lb.)
Front
1110 kg (2447 lb.)
Maximum permissible
axle capacity
Rear
1110 kg (2447 lb.)
*1: Unladen vehicle
*2: Vehicles without panoramic roof
*3: Vehicles with panoramic roof
*4: Vehicles with 16-inch tires
*5: Vehicles with 17-inch tires
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
465
Vehicle identification
■ Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for
your vehicle. This is the primary identification number for your
Toyota. It is used in registering the ownership of your vehicle.
This number is stamped on the
top left of the instrument panel.
This number is also on the
manufacturer’s label.
This number is also stamped
under the right-hand front seat.
8
PRIUS +_OM_OM47B24E_(EE)
466
8-1. Specifications
■ Engine number
The engine number is stamped
on the engine block as shown.
Engine
Model
2ZR-FXE
Type
4-cylinder in line, 4-cycle, gasoline
Bore and stroke
80.5 × 88.3 mm (3.17 × 3.48 in.)
Displacement
1798 cm3 (109.7 cu.in.)
Valve clearance
Automatic adjustment
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
467
Fuel
X EU area
Unleaded gasoline conforming to European
standard EN228 only
Fuel type
X Except EU area
Unleaded gasoline only
Research Octane Number
95 or higher
Fuel tank capacity
45 L (11.9 gal., 9.9 lmp.gal.)
(Reference)
Electric motor (traction motor)
Type
Permanent magnet synchronous motor
Maximum output
60 kW
Maximum torque
207 N•m (21.1 kgf•m, 153 ft•lbf)
Hybrid battery (traction battery)
Type
Lithium-ion battery
Voltage
3.6 V/cell
Capacity
5 Ah
Quantity
56 cells
Overall voltage
201.6 V
Lubrication system
8
Oil capacity (Drain and
refill reference*)
With filter
4.2 L (4.4 qt., 3.7 Imp.qt.)
Without filter
3.9 L (4.1 qt., 3.4 Imp.qt.)
*: The engine oil capacity is a reference quantity to be used when changing
the engine oil. Warm up the engine and turn off the hybrid system, wait
more than 5 minutes, and check the oil level on the dipstick.
PRIUS +_OM_OM47B24E_(EE)
468
8-1. Specifications
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota
recommends the use of approved “Toyota Genuine Motor Oil”.
Another motor oil of matching quality can also be used.
Oil grade:
0W-20, 5W-30 and 10W-30:
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade engine oil
Recommended viscosity (SAE):
SAE 0W-20 is filled into your
Toyota vehicle at manufactur-
Preferred
ing, and the best choice for
good fuel economy and good
starting in cold weather.
If SAE 0W-20 oil is not avail-
able, SAE 5W-30 oil may be
used. However, it should be
replaced with SAE 0W-20 at the
next oil change.
Temperature range anticipated
If you use SAE 10W-30 or a
before next oil change
higher viscosity engine oil in
extremely low temperatures,
the engine may become difficult
to start, so SAE 0W-20 or 5W-
30 engine oil is recommended.
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
469
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which
allows cold startability. Oils with a lower value before the W allow
for easier starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity
(one with a higher value) may be better suited if the vehicle is
operated at high speeds, or under extreme load conditions.
How to read oil container labels:
Either or both API registered marks are added to some oil contain-
ers to help you select the oil you should use.
API Service Symbol
1
Top portion: “API SERVICE SN”
means the oil quality designa-
tion by American Petroleum
Institute (API).
Center portion:
“SAE
0W-20”
means the SAE viscosity grade.
Lower portion:
“Resource-
Conserving” means that the oil
has fuel-saving and environ-
mental protection capabilities.
ILSAC Certification Mark
2
The International Lubricant Specification Advisory Committee (ILSAC)
Certification Mark is displayed on the front of the container.
8
PRIUS +_OM_OM47B24E_(EE)
470
8-1. Specifications
Cooling system
X Without an exhaust heat recirculator sys-
tem
Gasoline
6.5 L (6.9 qt., 5.7 Imp.qt.)
engine
Capacity
X With an exhaust heat recirculator system
6.9 L (7.3 qt., 6.1 Imp.qt.)
Power
2.7 L (2.9 qt., 2.4 Imp.qt.)
control unit
Use either of the following:
•
“Toyota Super Long Life Coolant”
• Similar high-quality ethylene glycol-
Coolant type
based non-silicate, non-amine, non-
nitrite, and non-borate coolant with
long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system (spark plug)
Make
DENSO SC20HR11 or SC16HR11
Gap
1.1 mm (0.043 in.)
NOTICE
■ Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
471
Electrical system
12-volt battery
12.5 V or higher: Fully charged
Open voltage at 20°C (68°F):
11.0 — 12.4 V: Half charged
10.9 V or lower: Discharged
(Voltage is checked 30 seconds after the
hybrid system and all lights are turned off.)
Charging rates
4.2 A max.
Transmission
Fluid capacity*
3.4 L (3.6 qt., 3.0 Imp.qt.)
Fluid type
Toyota Genuine ATF WS
*: The fluid capacity is the quantity of reference.
If replacement is necessary, contact any authorized Toyota dealer or
repairer, or another duly qualified and equipped professional.
NOTICE
■ Transmission fluid type
Using transmission fluid other than “Toyota Genuine ATF WS” may ulti-
mately damage the transmission of your vehicle.
8
PRIUS +_OM_OM47B24E_(EE)
472
8-1. Specifications
Brakes
X Left-hand drive vehicles
75 mm (2.95 in.)
Pedal clearance*1
X Right-hand drive vehicles
79 mm (3.11 in.)
Pedal free play
1.0 — 6.0 mm (0.04 — 0.24 in.)
Parking brake pedal travel*2
8 — 11 clicks
SAE J1703 or FMVSS No. 116 DOT 3, SAE
Fluid type
J1704 or FMVSS No. 116 DOT 4
*1: Minimum pedal clearance when depressed with a force of 196 N (20.0 kgf,
44.1 lbf) while the hybrid system is operating.
*2: Parking brake pedal travel when depressed with a force of 300 N (30.6 kgf,
67.5 lbf).
Steering
Free play
Less than 30 mm (1.2 in.)
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
473
Tires and wheels
X Type A
Tire size
205/60R16 92V
Tire inflation pressure
(Recommended cold tire
250 kPa (2.5 kgf/cm2 or bar, 36 psi)
inflation pressure)
Wheel size
16 × 6 1/2J
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
X Type B
Tire size
215/50R17 91V
Tire inflation pressure
(Recommended cold tire
230 kPa (2.3 kgf/cm2 or bar, 33 psi)
inflation pressure)
Wheel size
17 × 7J
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
X Compact spare tire (if equipped)
Tire size
T135/70D17 102M
Tire inflation pressure
(Recommended cold tire
420 kPa (4.2 kgf/cm2 or bar, 60 psi)
inflation pressure)
Wheel size
17 × 4T
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
8
PRIUS +_OM_OM47B24E_(EE)
474
8-1. Specifications
Light bulbs
Light bulbs
W
Type
Front fog lights
19
A
Front turn signal lights
21
B
Rear turn signal lights
21
B
Exterior
Back-up lights
21
C
Rear fog light
21
C
License plate lights
5
C
Vanity lights
8
C
Personal/interior lights
Vehicles without panoramic roof
5
C
Vehicles with panoramic roof
8
C
Interior
Rear interior light
8
D
Door courtesy lights
5
C
Luggage compartment light
5
C
A: H16 halogen bulbs
C: Wedge base bulbs (clear)
B: Wedge base bulbs (amber)
D: Double end bulbs
PRIUS +_OM_OM47B24E_(EE)
8-1. Specifications
475
Fuel information
EU area:
You must only use unleaded gasoline conforming to European
standard EN228.
Select unleaded gasoline with a Research Octane Number of 95
or higher for optimum engine performance.
Except EU area:
You must only use unleaded gasoline.
Select unleaded gasoline with a Research Octane Number of 95
or higher for optimum engine performance.
■ Use of ethanol blended gasoline in a gasoline engine
Toyota allows the use of ethanol blended gasoline where the ethanol content
is up to 10%. Make sure that the ethanol blended gasoline to be used has a
Research Octane Number that follows the above.
■ If your engine knocks
●Consult any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
● You may occasionally notice light knocking for a short time while accelerat-
ing or driving uphill. This is normal and there is no need for concern.
8
PRIUS +_OM_OM47B24E_(EE)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст