Toyota MR2 Spyder (2005 year). Manual — part 2
SECTION 1− 2
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys
8
Engine immobilizer system
10
Side doors
11
Power windows
13
Trunk lid
15
Engine hood
16
Fuel tank cap
18
Soft top
20
7
2005 MR2 from Aug. ’04Prod. (OM17527U)
Keys
A transponder chip for engine immobilizer
system has been placed in the head of
the master and sub keys. These chips are
needed to enable the system to function
correctly, so be careful not to lose these
keys. If you make your own duplicate key,
you will not be able to cancel the system
or start the engine.
To protect items locked in the glove box
or luggage space when using valet park-
ing, leave the sub key with the attendant.
Since the doors can be locked without a
key, you should always carry a spare
master key in case you accidentally lock
Your vehicle is supplied with two kinds
your keys inside the vehicle.
NOTICE
of keys.
1. Master keys
(black)—These keys work
When using a key containing a trans-
in every lock. Your Toyota dealer will
ponder chip, observe the following
need one of them to make a new key
precautions:
with a built−in transponder chip.
z When starting the engine, do not
2. Sub key (gray)—This key will not work
use the key with a key ring resting
in the glove box and luggage space.
on the key grip and do not press
the key ring against the key grip.
Otherwise the engine may not start,
or may stop soon after it starts.
8
2005 MR2 from Aug. ’04Prod. (OM17527U)
z Do not cover the key grip with any
material that cuts off electromagnet-
ic waves.
z Do not knock the key hard against
other objects.
z Do not leave the key exposed to
high temperatures for a long period,
such as on the dashboard and hood
under direct sunlight.
z Do not put the key in water or
wash it in an ultrasonic washer.
z Do not use the key with electromag-
netic materials.
z When starting the engine, do not
z Do not bend the key grip.
use the key with other transponder
keys around (including keys of oth-
er vehicles) and do not press other
key plates against the key grip.
Otherwise the engine may not start,
or may stop soon after it starts. If
this happens, remove the key once
and then insert it again after remov-
ing other transponder keys (includ-
ing keys of other vehicles) from the
ring or while gripping or covering
them with your hand to start the
engine.
9
2005 MR2 from Aug. ’04Prod. (OM17527U)
Engine immobilizer system
KEY NUMBER PLATE
The engine immobilizer system is a
The system is automatically set when the
theft prevention system. When you in-
key is removed from the ignition switch.
Your key number is shown on the plate.
Keep the plate in a safe place such as
sert the key in the ignition switch, the
The indicator light will start flashing to
your wallet, not in the vehicle.
transponder chip in the key’s head
show the system is set.
transmits an electronic code to the ve-
If you should lose your keys or if you
If either of the following indicator condi-
hicle. The engine will start only when
need additional keys, duplicates can be
tions occurs, contact your Toyota dealer.
the electronic code in the chip corre-
made by a Toyota dealer using the key
D The indicator light stays on.
sponds to the registered ID code for
number.
the vehicle.
D The indicator light does not start flash-
We recommend writing down the key num-
ing when the key is removed from the
ber and storing it in a safe place.
ignition switch.
D The indicator light flashes inconsistent-
ly.
Inserting the registered key in the ignition
switch automatically cancels the system,
which enables the engine to start. The
indicator light will go off.
10
2005 MR2 from Aug. ’04Prod. (OM17527U)
Side doors
For your Toyota dealer to make you a
For vehicles sold in U.S.A.
new key with built−in transponder chip,
your dealer will need your key number
FCC ID: MOZ RI−8FTY
and master key. However, there is a limit
MADE IN. JAPAN
to the number of additional keys your
Toyota dealer can make for you.
This device complies with Part 15 of the
If you make your own duplicate key,
FCC Rules. Operation is subject to the
you will not be able to cancel the sys-
following two conditions:
tem or start the engine.
(1) This device may not cause harmful
NOTICE
interference, and
(2) this device must
accept any interference received, includ-
Do not modify, remove or disas-
ing interference that may cause unde-
semble the engine immobilizer sys-
sired operation.
tem. If any unauthorized changes or
LOCKING AND UNLOCKING WITH KEY
modifications are made, proper opera-
Insert the key into the keyhole and turn
tion of the system cannot be guaran-
CAUTION
it.
teed.
To lock: Turn the key forward.
Changes or modifications not ex-
To unlock: Turn the key backward.
pressly approved by the party respon-
Both the doors lock and unlock simulta-
sible for compliance could void the
neously with either side door. In the driv-
user’s authority to operate the equip-
er’s door lock, turning the key once will
ment.
unlock the driver’s door and twice in suc-
cession will unlock both the doors simulta-
neously.
11
2005 MR2 from Aug. ’04Prod. (OM17527U)
CAUTION
Before driving, be sure that the doors
are closed and locked, especially
when small children are in the ve-
hicle. Along with the proper use of
seat belts, locking the doors helps
prevent the driver and passengers
from being thrown out from the ve-
hicle during an accident. It also helps
prevent the doors from being opened
unintentionally.
LOCKING AND UNLOCKING WITH
LOCKING AND UNLOCKING WITH
INSIDE LOCK KNOB
POWER DOOR LOCK SWITCH
Move the lock knob.
Push the switch.
To lock: Push the knob forward.
To lock: Push the switch down on the
To unlock: Pull the knob backward.
“LOCK” side.
To unlock: Push the switch down on the
Closing the door with the lock knob in the
“UNLOCK” side.
lock position will also lock the door. Be
careful not to lock your keys in the ve-
Both the doors lock or unlock simulta-
hicle.
neously.
The doors cannot be locked if you leave
the key in the ignition switch.
12
2005 MR2 from Aug. ’04Prod. (OM17527U)
Power windows
The windows can be operated with the
Automatic operation
(to open only):
OPERATING
THE
PASSENGER’S
switch on the center console.
Push the switch completely down and then
WINDOW
release it. The window will fully open. To
The power windows work when the ignition
Use the switch on the passenger’s side
stop the window partway, lightly pull the
switch is in the
“ON” position.
of the center console.
switch up and then release it.
OPERATING THE DRIVER’S WINDOW
The window moves as long as you hold
the switch.
Use the switch on the driver’s side of
the center console.
To open: Push down the switch.
To close: Pull up the switch.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Pull up the switch.
13
2005 MR2 from Aug. ’04Prod. (OM17527U)
CAUTION
D Be sure to remove the ignition key
or turn the ignition switch to the
To avoid serious personal injury, you
“LOCK” position when you leave
must do the following.
your vehicle.
D Before you close the power win-
D Never leave anyone
(particularly a
dows, always make sure there is
small child) alone in your vehicle,
nobody around the power windows.
especially with the ignition key still
You must also make sure the
inserted. Otherwise, he/she could
heads, hands and other parts of the
use the power window switches and
bodies of all occupants are kept
get trapped in a window. Unat-
completely inside the vehicle. If
tended person
(particularly a small
someone’s neck, head or hands get
child) can be involved in a serious
caught in a closing window, it
accident.
If you push in the window lock switch on
could result in a serious injury.
the instrument panel, the passenger’s win-
When anyone closes the power win-
dow cannot be operated.
dows, make sure he or she oper-
ates the windows safely.
D When small children are in the ve-
hicle, never let them use the power
window switches without supervi-
sion. Use the window lock switch to
prevent them from making unex-
pected use of the switches.
14
2005 MR2 from Aug. ’04Prod. (OM17527U)
Trunk lid—
Front box cover
To open the trunk lid:
2. In front of the vehicle, pull up the
3. Hold the trunk lid open by inserting
auxiliary catch lever and lift the
the support rod into the slot.
1. Open the glove box door, and then
trunk lid.
pull the trunk lid lock release lever.
To insert the support rod into the slot,
The trunk lid will spring up slightly.
move it straight up. If it is moved to the
side or toward the inside of the vehicle,
CAUTION
it may become detached.
Before closing the trunk lid, return the
Before driving, be sure that the trunk
support rod to its clip—this prevents
lid is closed and securely locked.
rattles. Then lower the trunk lid and make
Otherwise, the trunk lid may open un-
sure it locks into place. If necessary,
expectedly while driving and an acci-
press down gently on the front edge to
dent may occur.
lock it.
15
2005 MR2 from Aug. ’04Prod. (OM17527U)
—Luggage security system
Engine hood
CAUTION
D After inserting the support rod into
the slot, make sure the rod sup-
ports the trunk lid securely from
falling down on to your head or
body.
D Before closing the trunk lid, lock
the front box cover securely.
This prevents the front box from
being damaged.
D Keep the trunk lid closed while
driving. This keeps the luggage
If you do not want to activate the trunk
To open the engine hood:
from being thrown out.
lid lock release lever, insert the master
1. Pull the engine hood lock release
key to the glove box, and turn it clock-
lever. The engine hood will spring up
wise.
slightly.
NOTICE
The engine hood lock release lever can
Be sure to return the support rod to
be locked by the key.
its clip before closing the trunk lid.
Closing the trunk lid with the support
CAUTION
rod up could cause the trunk lid to
bend.
Before driving, be sure that the en-
gine hood is closed and securely
locked. Otherwise, the engine hood
may open unexpectedly while driving
and an accident may occur.
16
2005 MR2 from Aug. ’04Prod. (OM17527U)
CAUTION
After inserting the support rod into
the slot, make sure the rod supports
the engine hood securely from falling
down on to your head or body.
NOTICE
Be sure to return the support rod to
its clip before closing the engine
hood. Closing the engine hood with
the support rod up could cause the
2. In rear of the vehicle, lift the engine
3. Hold the engine hood open by in-
engine hood to bend.
hood.
serting the support rod into the slot.
To insert the support rod into the slot,
CAUTION
move it straight up. If it is moved to the
side or toward the inside of the vehicle,
Be careful not to touch the engine
it may become detached.
hood, the support rod, or surrounding
Before closing the engine hood, check to
area which could be hot after driving,
see that you have not forgotten any tools,
to prevent burning yourself.
rags, etc. and return the support rod to its
clip—this prevents rattles. Then lower the
engine hood and make sure it locks into
place. If necessary, press down gently on
the rear edge to lock it.
17
2005 MR2 from Aug. ’04Prod. (OM17527U)
Fuel tank cap
LOCKING AND UNLOCKING WITH
This indicates that the fuel filler door
1. To open the fuel filler door, pull the
ENGINE HOOD
is on the left side of your vehicle.
lever up.
To lock: Turn the key clockwise.
When refueling, turn off the engine.
The engine hood lock release lever can
The fuel filler door opener lever can be
be locked by the key.
locked by the key.
When leaving the vehicle with the soft top
lowered, make sure to lock the engine
hood lock release lever with the key.
The fuel filler door opener lever is locked
at the same time.
18
2005 MR2 from Aug. ’04Prod. (OM17527U)
CAUTION
CAUTION
D Do not smoke, cause sparks or al-
D Make sure the cap is installed se-
low open flames when refueling.
curely to prevent fuel spillage in
The fumes are flammable.
the event of an accident.
D When opening the cap, do not re-
D Use only a genuine Toyota fuel tank
move the cap quickly. In hot weath-
cap for replacement. It is designed
er, fuel under pressure could cause
to regulate fuel tank pressure.
injury by spraying out of the filler
neck if the cap is suddenly re-
moved.
2. To remove the fuel tank cap, turn
the cap slowly counterclockwise,
then pause slightly before removing
it. After removing the cap, hang the
tether as shown in the illustration.
It is not unusual to hear a slight swoosh
when the cap is opened. When installing,
turn the cap clockwise till you hear a
click.
If the cap is not tightened securely, the
malfunction indicator lamp comes on.
Make sure the cap is tightened securely.
The indicator lamp goes off after driving
several times. If the indicator lamp does
not go off, contact your Toyota dealer as
soon as possible.
19
2005 MR2 from Aug. ’04Prod. (OM17527U)
Soft top—
—Soft top precautions
Sequential manual transmission: Before
NOTICE
raising or lowering the soft top, lower both
side windows, apply the parking brake, put
z Make sure there are no items or
the selector lever in the
“S(1)” position
packages in the folding board when
and stop the engine.
lowering in the soft top. Even small
Manual transmission: Before raising or
items may interfere with the soft
lowering the soft top, lower both side win-
top operation and can cause dam-
dows, apply the parking brake, stop the
age.
engine and put the transmission lever in
z Do not sit or place excessive
the first position.
weight on the soft top when the top
is up or down. Damage to the top
CAUTION
may occur.
z Do not raise or lower the soft top
D When raising or lowering the soft
LOCKING AND UNLOCKING WITH FUEL
when the temperature is below 5_C
top, keep hands off from the hinges
TANK CAP
(41_F). Damage to the top or rear
of the top side rails and any part
window may result. If necessary to
To lock: Turn the key clockwise.
of the top linkage.
do so, warm the vehicle in a heated
The fuel filler door opener lever can be
D To prevent personal injury, do not
garage prior to operating the soft
locked by the key.
raise or lower the soft top when the
top mechanism.
When leaving the vehicle with the soft top
wind is strong.
z Do not lower the soft top if the top
lowered, make sure to lock the fuel filler
D The vehicle should never be driven
is damp or wet. Possible interior
door opener lever with the key.
with the soft top partially lowered.
water damage, water stains or mil-
The engine hood lock release lever is
Make sure the top has been either
dew on the top material may result.
locked at the same time.
fully latched to the windshield
frame or fully lowered before driv-
ing.
20
2005 MR2 from Aug. ’04Prod. (OM17527U)
—Lowering the soft top
z When the soft top is completely
lowered, keep the rear window de-
fogger turned off to avoid damage
to the top.
z It may be hard to fix the soft top
when raising it after having kept it
open for a long time.
1. Lower both side windows and sun
2. Stand outside of the vehicle and pull
visors. Then pull down the lock lev-
the soft top up holding the part
ers on both sides of the vehicle fully
shown in dark color in the illustra-
while pushing down the button.
tion.
Be sure not to leave any object on the
folding board.
If the battery is discharged and the win-
dows cannot be lowered, open both the
doors.
21
2005 MR2 from Aug. ’04Prod. (OM17527U)
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст