Toyota FJ Cruiser (GSJ 10, 15 series). Manual — part 232
1GR-FE FUEL – FUEL TANK
FU–43
FU
(b) Remove the center floor silencer pad LH.
(c) Remove the 3 screws from the center floor.
(d) Disconnect the connector.
7.
REMOVE FUEL TANK TO FILLER PIPE HOSE
(a) Loosen the clamp bolt, and disconnect the fuel tank
to filler pipe hose.
A129907
A129904
A129908
A129909
FU–44
1GR-FE FUEL – FUEL TANK
FU
8.
REMOVE NO. 1 FUEL TANK BREATHER TUBE SUB-
ASSEMBLY
(a) Pinch the retainer to disengage the lock claws and
pull out the No.1 fuel tank breather tube.
NOTICE:
•
Check that there is no dirt or mud around the
quick connector before performing this work,
because the quick connector has an O-ring
which seals the pipe and the connector.
Clean the connector if necessary.
•
Do not use any tools in this work.
•
Do not bend or twist the nylon tube.
•
To protect the tube, cover it with a vinyl bag
after disconnecting it.
•
When the connector and the pipe are stuck,
turn the retainer carefully to free and then
disconnect the fuel tank tube.
9.
REMOVE NO. 1 FUEL TANK PROTECTOR SUB-
ASSEMBLY
(a) Remove the 2 nuts and the fuel tank protector
bracket. (for automatic transmission)
(b) Remove the nut and the fuel tank protector bracket.
(for manual transmission)
(c) Remove the 4 nuts and the fuel tank protector.
O-Ring
Retainer
A138099E01
A137217
A138100
A129913
1GR-FE FUEL – FUEL TANK
FU–45
FU
10. DISCONNECT FUEL TANK MAIN TUBE AND FUEL
TANK RETURN TUBE
(a) Pinch the retainer to disengage the lock claws and
pull out the 2 fuel tank tubes.
NOTICE:
•
Check that there is no dirt or mud around the
quick connector before performing this work,
because the quick connector has an O-ring
which seals the pipe and the connector.
Clean the connector if necessary.
•
Do not use any tools in this work.
•
Do not bend or twist the nylon tube.
•
To protect the tube, cover it with a vinyl bag
after disconnecting it.
•
When the connector and the pipe are stuck,
turn the retainer carefully to disconnect them.
11. DISCONNECT FUEL TANK VENT HOSE
(a) Disconnect the fuel tank breather tube from the fuel
tank.
(1) Push the connector deep inside.
(2) Pinch portion A, as shown in the illustration.
(3) Pull out the connector.
12. REMOVE FUEL TANK ASSEMBLY
(a) Hold the fuel tank using a mission jack.
(b) Remove the 2 fuel tank bands.
(1) Remove the 2 bolts.
(2) Remove the 2 clips and 2 pins, then remove
the 2 fuel tank bands.
UNLOCK
LOCK
O-Ring
Retainer
A129911E02
Push
Pinch
A
Pinch
A
A129912E01
A129914
FU–46
1GR-FE FUEL – FUEL TANK
FU
13. REMOVE NO. 3 FUEL TANK PROTECTOR
(a) Remove the 2 bolts and disengage the 3 claws,
then remove the No. 3 fuel tank protector.
14. REMOVE FUEL TANK CUSHION
(a) Remove the 4 fuel tank cushions from the fuel tank.
A129923
A129919
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст