Toyota FJ Cruiser (GSJ 10, 15 series). Manual — part 463
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE–33
SE
11. REMOVE REAR SEATBACK STOP BUTTON
GROMMET
(a) Disengage the 2 claws and remove the rear
seatback stop button grommet.
12. REMOVE REAR SEATBACK FRAME SUB-
ASSEMBLY
(a) Remove the rear seatback frame.
13. REMOVE REAR SEATBACK LOCK ASSEMBLY
(a) Remove the 2 bolts and the rear seatback lock.
14. REMOVE REAR SEATBACK COVER
(a) Pass the hook of the rear seatback cover through
the slit in the rear seatback pad.
(b) Remove the 8 hog rings and the rear seatback
cover.
B130741
B130738
B130742
B130744
SE–34
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE
REASSEMBLY
CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat
cushion frame and the rear seatback frame could cause
injuries to your hands.
1.
INSTALL REAR SEATBACK COVER
(a) Using hog ring pliers, install the rear seatback cover
with 8 new hog rings.
NOTICE:
•
Do not soil or scratch the rear seatback
cover.
•
When installing the hog rings, minimize
wrinkles as far as possible.
(b) Pass the hook of the rear seatback cover through
the slit in the rear seatback pad.
2.
INSTALL REAR SEATBACK LOCK ASSEMBLY
(a) Install the rear seatback lock with the 2 bolts.
Torque: 18 N*m (185 kgf*cm, 13 ft.*lbf)
New Hog Ring
Hog Ring Pliers
B130745E01
B130742
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE–35
SE
3.
INSTALL REAR SEATBACK FRAME SUB-ASSEMBLY
(a) Install the rear seatback frame.
(b) Using hog ring pliers, install 14 new hog rings.
4.
INSTALL REAR SEATBACK STOP BUTTON
GROMMET
(a) Engage the 2 claws and install the rear seatback
stop button grommet.
B130738
New Hog Ring
Hog Ring Pliers
B130737E01
B130741
SE–36
SEAT – REAR SEAT ASSEMBLY (for LH Side)
SE
5.
INSTALL REAR SEATBACK LOCK RELEASE
BUTTON
(a) Install the rear seatback lock release button.
6.
INSTALL REAR SEAT HEADREST SUPPORT
HINT:
Use the same procedure for both sides.
(a) Align the protruding portion of the rear seat headrest
support with the installation groove of the rear
seatback frame.
(b) Engage the 2 claws and install the rear seat
headrest support.
7.
INSTALL TETHER ANCHOR COVER
(a) Engage the 3 claws and install the tether anchor
cover.
(b) Engage the 2 claws and close the cover.
B130743
Protrusion
B130740E01
B130735
B130733
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст