BYD F7-1, F7-2, F7-3. Service Instruction — part 3
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-23
can’t be fixed). The click sound is to
remind user that the function is
normal rather than fault noise!
Friendly Tips
When the child protection
module of the rear seat is
activated, please pull out the
ribbon completely and apply
appropriate force to avoid
damage.
Indicator that front passenger’s
seat belt isn’t fastened
If the F7
passenger’s car you
purchased is provided with seat
belt alarm sensor, the switch group
on the central control panel of the
instrument platform has an
indicator that
front passenger’s seat
belt isn’t fastened (black shaded area
in above figure). It is used together with
the seat belt. When a passenger sits
on the front passenger's seat but
doesn’t fasten the seat belt, it is lit and
accompanied with alarm sound to
remind the driver and the passenger.
When the front passenger fastens the
seat belt, the indicator goes out. If no
passenger sits on the front passenger’s
seat, the indicator is off.
Friendly Tips
Seat belts equipped on the
vehicle are designed for
adults and should be
applied to children with
caution.
It is suggested to seat
children in the rear seat
with child seat and fasten
the seat belt for
protection. Do not let the
children sit in the front
passenger’s seat.
Do not place children on
your knees or hold them
in your arms, or else it
may result in serious
injury or even death of the
children. Arranged in the
front seat or the rear seat,
children should not be
allowed to stand or kneel.
In emergency braking or
crashes, unprotected
children may be seriously
injured.
When the vehicle is
driving, passengers in it
should sit in the seats and
fasten the seat belts
correctly; otherwise, in
emergency braking or
crashes, people in the car
are more prone to severe
injuries.
At the same time, a seat
belt can only be used by
one person. It’s not
allowed that two or more
persons share one seat
belt
—even for children.
Do not incline the seat
back over. The seat belt
has the best protection
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-24
effect when the seat back
is in the upright position.
Check the seat belt
regularly to see whether it
has cutting lines, worn or
loose parts. Damaged
parts should be replaced
with new ones; the system
should not be
disassembled or modified.
After serious crashes, the
seat belt system
(including screws) should
be replaced, even if the
damage is not so marked.
When the spring bolt is
inserted, make sure that
the spring bolt and buckle
are fixed and the seat belt
isn’t twisted.
Do not leave small
objects, e.g. coins, paper
clips, etc. in the buckle.
They may affect the
connection of the tab and
the buckle.
If the seat belt functions
abnormally, immediately
inform BYD authorized
service stations. Before
repaired, it cannot protect
passengers.
Keep a straight posture
and stay back, keep a
proper distance with the
steering wheel and
instrument panel, so as to
play the maximum
protective effect of seat
belt and SRS.
It should be made sure
that the shoulder seat belt
passes over the shoulder
center.
The seat belt should be
somewhat far away from
the neck without sliding
off the shoulder.
Otherwise, its protection
effect may be reduced and
severe human injuries
may be caused in crash
accidents.
Airbag
Airbag is the supplemental restraint
system, which is a supplement to seat
belts. The airbag system can provide
extra protection for heads and chests
of the driver and passengers and
reduce casualties in severe frontal
crashes.
Friendly Tips
Please keep the seat belt
fastened when the vehicle
is driving!
Please keep sitting in a
correction posture so that
the protection effect of the
seat belt and the airbag
system can be taken into
full play.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-25
For children, the rear seats
are the safest position!
Do not dismount parts of
the airbag without
permission!
Airbag triggering conditions
The airbag is designed to be
triggered under the following
conditions: frontal (side) collision
accidents may trigger the airbag
system; special collision accidents
may trigger the airbag system.
In general, the airbag system won’t
be triggered in mild front collision or
side collision accidents, in rear end
collisions or in turn-over accidents.
In such accidents, the seat belt, if
fastened, can protect the driver in
the normal way.
The decisive factor for triggering
the airbag system is the
comprehensive intelligent
comparison and judgment of the
deceleration curve produced in a
collision and acquired by the
electronic control unit (ECU) and the
set value. If the automobile
deceleration signal produced and
detected in the collision is lower than
the set reference value in the ECU, the
airbag won’t be triggered even though
the car may have been severely
deformed in the accident.
ECU setting of BYD airbag system
takes various common misuse and
domestic road conditions into full
consideration. However, reasons and
conditions of crashes are variable, so,
for your safety, please abide strictly by
this instruction, use the automobile
correctly and avoid misuse; otherwise,
the expected protection effect of the
airbag cannot be ensured.
Airbag warning light
The airbag system is monitored by an
electronic control unit and provided
with self-diagnosis function. The
system state can be indicated by a
warning light on the instrument panel:
Each time after the ignition switch is
turned on, the airbag warning light
turns on for about 5s and then goes out
for longer than 5s, and the system can
be considered as normal.
If the airbag has already been
deactivated by a BYD authorized
service station, but the warning light
still turns on and goes out as above, it
Airbag
warning
light
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-26
means the airbag has no protection
function.
Friendly Tips
In case of faults, have the
airbag system checked
immediately in a BYD
authorized service station.
Otherwise, in accidents, partial
or all function of the airbag
system may be affected!
Conditions that airbag may
expand
When crossing deep notch, the
fronts hit the ground
Hit the bump or street stone at
roadside.
The front hits the ground when
going downhill
Conditions that the airbag may not
expand
Hitting on a cement pole, a tree or
other slim objects
Crashing into the bottom of a truck
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-27
Hit by other vehicles on the side
Rear Crash
Side rollover
Warning
The airbag is designed to
match the certain vehicle
models. Any changes of
the suspension, the tire
size, the bumper, the
chassis and other original
equipment may adversely
affect the function of the
airbag. In addition, it is
strictly prohibited to apply
any airbag parts to other
vehicle models; otherwise
it might lead to safety
airbag system failure,
resulting in personal
injuries.
During driving, please
wear the seat belt correctly
and maintain a correct
sitting posture. If you
haven’t worn the seat belt
and lean forward or sit in
an incorrect posture, the
risk of injuries in accidents
with airbag expansion may
be increased.
It’s very important for the
driver to maintain a
distance of at least 25cm
between the chest and the
steering wheel since only
by doing so can the
maximum protection effect
be provided when the
system is triggered.
Do not paste or cover
the surface of the steering
wheel lid or the surface
near the airbag on the right
of the instrument panel
with any objects or do any
other decorative
treatment. cleaned with
only dry or slightly wetted
cloth and should not be
knocked at violently
Don’t let child passenger
sit in the front seat without
protection. If a collision
triggers the air bag, the
child passenger may get
seriously injured or even
killed.
Telephone supports, cups,
ashtrays, etc. can
increase the risk of
injuries in accidents with
airbag inflation.
The side airbags and side air
curtains expand at fast speed
and great force. In vehicles
equipped with side airbags
and side air curtains, never
lean against the door, or else
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-28
it may result in serious injury
or even death.
Do not install other
accessories or items
within the effective scope
of the side air curtain,
such as windshield glass,
side door glass, “A” pillar
trim panel, roof,
“B” pillar
trim panel,
“C” pillar trim
panel and auxiliary
handle, because the great
force of side air curtains
will shoot off the
accessories or items or
side air
curtains can’t
expand, resulting in
serious injury or even
death.
Do not modify or replace
the trim of the seats with
or without side airbags,
because these changes
will interfere with the
normal expansion of side
airbags, cause system
failure or unexpected
expansion of side airbags,
resulting in serious injury
or even death.
Do not disassemble or
repair the A pillar, roof, B
pillar, or C pillar with side
air curtain. These changes
may cause system failure
or unexpected expansion
of air curtain, leading to
serious injury or even
death.
Never modify any
component of the air bag
system, including the
corresponding label. Any
operation of the airbag
should be performed by
BYD authorized service
station.
The airbag system must
be replaced in a BYD
authorized service station
within 10 years as of the
date of manufacture. The
maintenance instruction has
the record if certain part of
the airbag system had
been replaced.
The air bag can only
provide protection once.
Once the air bag is
triggered or damaged, the
system must be replaced.
Please hand our materials
to the next owner of the
vehicle in transfers.
Please note that if the
airbag is shut down, the
information should be
informed the next owner
of as well.
When disposing the parts
of the vehicle or the airbag
system, please comply
with correlative safety
regulations and disposal
procedures.
The air bag system has
strong resistance capacity
against the surrounding
electromagnetic
interference. However, to
avoid accidents, please do
not use the vehicle
beyond the
electromagnetic
environment specified by
national laws.
The airbag system of BYD
auto has taken into full
consideration various
kinds of misuses and road
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-29
conditions. However,
avoid serious crashes
happen in the bottom of
the vehicle or drive
toughly in poor road
conditions in order to
prevent accidents.
The airbag system of BYD
F7 passenger
’s car has
been fully validated, and
the original vehicle wiring
harness system and the
air bag system exactly
match. Any modification
of the vehicle wiring
harness may result in
unexpected expansion or
failure of the expansion of
the airbag.
Steering wheel switch group
(optional)
The audio control switch is available
when the start button is in ACC or ON
position.
Press
“+” to turn up the volume
Press
“-” to turn down the volume
Press
“∧” in radio mode: scan next
available radio channel automatically
(increase frequency)
In CD/USB/SD/AUX mode: play next
track (track # +1);
In DVD mode: go to next chapter;
In TV mode: play next channel.
Press
“∨” in radio mode: scan
previous available radio channel
automatically (decrease frequency)
In CD/USB/SD/AUX mode: play
previous track (track # -1);
In DVD mode: go to previous chapter;
In TV mode: play previous channel.
Press
“MODE” to select the mode,
which switches among
FM→AM→CD
(if disc is inserted)
→ DVD → TV →
USB (if USB disk is connected)
→ AUX
(if a player is connected to AUX
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-30
interface)
→ SD (if inserted) in
sequence.
If the audio system is turned off,
press MODE to turn it on and enter
the playing mode when it was
turned off. If there is no playing
source in the playing mode (e.g. no
disc or external audio device), it will
switch to FM mode directly, and
switch in above sequence when
you press the MODE key;
Press and hold it and you can turn
off the audio system.
When the start button is in ACC
position, press
“ ” to use it as
the auxiliary calling and ending
device of car phone for
calling/answering (press this key
and the audio system is mute).
When the start button is in ACC
position, press
“ ” to use it as
the auxiliary calling and ending
device of car phone and end the call (if
the audio system is mute, the system
will resume the original operation).
When the start button is in ON position,
it can
be used together with the 7”
screen to assist the driver to check the
car surrounding. When the start button
is in ON position, the transmission is
set to
“R”, the rear camera is activated,
and the display switches to the 7”
screen automatically. Press
“
” in
sequence: activate the camera
→ right
camera
→ rear camera → right camera
→ deactivate the camera.
Press
“ ” to scroll up the instrument
menu.
Press
“ ” to scroll down the
instrument menu.
Press
“OK” to enter the menu.
When the start button is in ON position,
the cruise switch is available and
“+
RES
” is the speed up/reset button; “-
SET
” is the speed down/setting button;
“CANCEL” is cruise canceling button;
“ON /OFF” is cruise control button. In
ON position, press the ON/OFF button
in the right of the steering wheel, and
the indicator on the instrument panel is
illuminated.
Steering wheel
To change the steering wheel angle,
hold the steering wheel, push down the
lock release lever, tilt the steering
wheel to the desired angle and return
the lever to its original position.
Friendly Tips
Do not adjust the steering
wheel while the vehicle is
moving. This may cause
the driver to mishandle the
vehicle and an accident
may occur.
After adjusting the
steering wheel, try to move
it upward and downward
to make sure that it is
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-31
locked in position.
Electric rearview mirror
Press this switch to adjust the
direction of left and right rearview
mirrors.
1. Selection switch
—— to select
the rearview mirror to be
adjusted by pressing the switch
to
“L” or “R”.
2. Control switch
—— to adjust the
rearview mirror by pressing the
switch accordingly.
3. Folding switch
— to fold the
rearview mirror.
When the start button is in
“ACC” or
“ON” position, the mirror can be
adjusted.
Warning
If the rearview mirror is frozen,
do not operate the controller or
scratch the surface of the
rearview mirror; use spraying
de-icer to remove the ice on the
rearview mirror.
Interior rearview mirror (optional)
1. Adjust the position of the
interior rearview mirror to
watch the rear view through the
rear windshield.
2. The electronic anti-glare
function applies to all vehicle
models
Press the power button to turn on/off
the electronic anti-glare function.
(1) Turn on electronic
anti-glare function
—— power
indicator is illuminated, and the
surface of the interior rearview
mirror may have two
conditions
3. Compass display
1. Key, 2. Anti-glare indicator,
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-32
Daytime: the rear view is clear
Night: When the rear headlights are
illuminated, the anti-flare function is
turned on and the reflectivity
decreases; when the rear
headlights are turned off, the
anti-flare function is turned off and
the reflectivity resumes normal.
(2) Turn off electronic anti-glare
function
—— power
indicator is off.
It is recommended that turn off
the electronic anti-flare function
when reversing the car in the
night.
4. Considerations of interior
rearview mirror compass:
(1) When the car is started, the
electronic compass displays;
when the car is flame out, the
electronic compass hides;
(2) If the reversing radar is turned on,
the electronic compass hides
while reversing;
(2) The direction indicated by the
front in the figure is the actual
driving direction;
(3) The altitude shows the altitude of
the car; it is normal that the
display error is in 50m.
Warning
Do not adjust the interior
rearview mirror while
driving, or else the driver
may be unable to control
the car and cause
accidents, resulting in
injury or even death.
Instruction calibration of interior
rearview mirror
I. Before calibrating the direction,
please note the two matters below:
1. The direction displayed by the
interior rearview mirror compass is the
direction of the front.
2. For calibration, select an open and
flat square or closed street or ring
driveway (roundabout), and confirm the
directions (as shown in the figure);
N
W
E
S
m
Altitude
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-33
II. Calibration step
Step 1: ignite to start
Step 2: select the starting
position, which may be any one of
north, south, west and east.
Step 3: press and hold interior
rearview mirror key until the upper
right of the glass displays several
lines of description text (calibration
step description) and the anti-flare
indicator flashes three times quickly
(indicator illuminates and goes out
once) and then release the key.
Step 4: drive one circle (360°) or
two circles at low speed (< 8km/h)
and return to starting position (do
not flame out while driving; both
clockwise and counterclockwise are
allowed)
Step 5: adjust the head to
“south”.
Press the key once (release
immediately), the anti-flare indicator
flashes three times and the compass
points to
“South”, and the calibration
finishes.
Step 6: after calibration, drive the car
for one circle to check whether each
direction is proper. If not, re-calibrate
from step 1.
Sunroof
The sunroof has two positions: to
ensure ventilation, lift the rear side or
slide into the roof. The switch below the
air outlet of the instrument panel at
driver’s side can be used to control the
sunroof. However, the start button
must be in
“ON” position.
To lift the rear side of the sunroof,
press and hold (
); to close the
sunroof, press and hold (
) in
the top; to open the sunroof, press and
hold (
) in the bottom.
N
E
W
S
Close sunroof
Open sunroof
Incline
sunroof
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-34
When the sunroof reaching desired
position, release the switch. Before
opening/closing the sunroof, make
sure that the all passengers have
moved their hands away from the
sunroof.
Warning
When opening/closing the
sunroof, it will cause
serious injury if certain
passenger’s hand or finger
is clamped. Before
opening/closing, make sure
that all passengers have
moved their hands away
from the sunroof.
While driving, do not leave
the body out of the sunroof.
The sunroof has keyless delay
function. When the vehicle power is
cut off, this function still allows
opening or closing the sunroof in 45
seconds. Open any front door and
the delay function can be canceled
immediately. At this moment, you must
switch the start button to "ON" position
in order to manipulate the sunroof.
Warning
The sunroof or motor may be
damaged if the sunroof is
opened in the environment
lower than 0℃ or is covered by
snow.
Left info display
The left info display includes
tachometer, accelerometer, mileage,
gear indication, and exterior
temperature.
Tachometer
When the engine is started, the
accelerometer displays the
acceleration info of the car. When the
car is driving at constant speed or
doesn’t have speed, the accelerating
ball points at the center; when the car
is accelerating , the ball moves
upwards; when the car decelerates and
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Instruction
Instrument and Controller Operation 1-35
brakes, the ball moves downwards.
Right info display
The right info display includes
engine coolant temperature gauge,
fuel gauge, backlight adjustment
position prompt, adjustment menu,
driving info, prompt and fault info.
Engine coolant temperature
gauge
When the power is in
“ON” position,
this gauge indicates the temperature of
the engine coolant. The working
temperature of engine changes with
the weather and engine load.
If the coolant temperature icon
turns into red and the right info
display shows
“coolant temperature is
too high
”, the engine coolant
temperature is too high. If the car is
overheated, please stop the car and let
the engine cool down.
Under the following working conditions,
the engine may become too hot:
Climbing for long in hot weather.
Driving with frequent stopping or
idling the engine for long with the air
conditioning system turned on.
Towing a trailer.
Warning
Stop the car immediately if the
engine water temperature is too
high.
Fuel gauge
If the fuel level is too low (near
“E”),
the fuel level icon is illuminated,
and the right info display shows
“Please add fuel”, then, please add
fuel as soon as possible.
Adjustment menu
Enter and adjust the menu with
steering wheel key.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Instruction
Instrument and Controller Operation 1-36
1. OK is used to confirm the
selection.
2.
is used to scroll up the
menu selection bar.
3.
is used to scroll down the
menu selection bar.
The menu structure is shown
below:
Maintenance
Maintenance time
Maintenance mileage
View
Language
Simplified Chinese
English
Custom
Automatic door lock
Speed alarm
Theme
Automatic rearview mirror mode
Tire pressure unit (optional)
Reset
The menu function is shown below:
1. Maintenance: set up the
maintenance function and state
When the maintenance function is
turned on, if the maintenance almost
expires or has already expired, and the
power is in
“ON” position, the right info
display will show corresponding
prompt.
1) Maintenance time: set up the
maintenance time
Item
Function
Maintenance
time
Menu name
XX day
Or ---
Currently set
maintenance time,
or display three
short lines if this
function is turned
off
OK
Menu
Maintenanc
e
Language
Custom
Reset
Exit
Select
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3 Ow
ner’s Manual
Instrument and Controller Operation 1-37
ON/OFF
Turn on/off
maintenance time
+30 days
Increase the
maintenance time
by 30 days
-30 days
Decrease the
maintenance time
by 30 days
Reset
Reset the
maintenance time
Back
Exit and back to
previous menu
2) Maintenance mileage: set up
the maintenance mileage
Item
Function
Maintenance
mileage
Menu name
XX km or ---
Currently set
maintenance
mileage, or
display three short
lines if this
function is turned
off
ON/OFF
Turn on/off
maintenance
mileage
+500km
Increase the
maintenance
mileage by 500km
-500km
Decrease the
maintenance
mileage by 500km
Reset
Reset the
maintenance
mileage
Back
Exit and back to
previous menu
3) View: view currently remaining
maintenance time and mileage
2. Language: set up the display
language.
Item
Function
Language
Menu name
Simplified
Chinese
or English
Display currently set
language
Simplified
Chinese
Set the language to
simplified Chinese
English
Set the language to
English
Back
Exit and back to
previous menu
3. Custom: customize the settings
1) Automatic door lock
Turn on/off the function: when the
speed reaches 20km/h, the system
will lock all doors automatically
Item
Function
Automatic
door lock
Menu name
ON/OFF
Indicate current
state of the function
ON
Turn on the
automatic door lock
OFF
Turn off the
-------------------------------------------------------------------------------------------------------------------------------------------------------------
BYD F7-1, F7-2, F7-3
Owner’s Manual
Instrument and Controller Operation 1-38
automatic door lock
Back
Exit and back to
previous menu
2) Speed alarm: set up the speed
alarm
When the speed reaches set alarm
value, the LCD in the right of the
instrument will show the alarm info.
Item
Function
Speed
alarm
Menu name
X km/h
Or---
Currently set alarm
speed, or display three
short lines if this
function is turned off
ON/OFF
Turn on/off speed
alarm
+10km/h
Increase the alarm
speed by 10 km/h
-10km/h
Decrease the alarm
speed by 10 km/h
Back
Exit and back to
previous menu
3) Theme
Set up the theme of left and right
LCD.
Item
Function
Theme
Menu name
Phantom
or blue
stars
Display currently set
theme
Phantom
Set the theme to
Phantom
Blue
stars
Set the theme to Blue
stars
Back
Exit and back to
previous menu
4) Automatic rearview mirror mode
(optional)
Turn on/off the function: the rearview
mirrors are folded automatically when
the car is locked.
Item
Function
Automatic
rearview
mirror
mode
Menu name
ON/OFF
Indicate current state
of the function
ON
Turn on automatic
rearview mirror
folding
OFF
Turn off automatic
rearview mirror
folding
Back
Exit and back to
previous menu
5) Tire pressure unit (optional)
Set up the tire pressure unit.
Item
Function
Tire
pressure
unit
Menu name
kPa, bar
or psi
Currently set tire
pressure unit
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст