Citroen Jumper (2016 year). Manual — part 13

Touch Screen Audio - Telematic System

191

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

comment

rAdIO

Audio

Equaliser

Adjust the bass, mid-range and treble.

Balance / Fade

Bass

Adjust the balance of the speakers, front and rear,
left and right.
Press the button in the middle of the arrows to
balance the adjustments.

Mid-range

Treble

Volume / Speed

Select the desired setting, the option is
highlighted.

Loudness

optimise audio quality at low volume.

Automatic radio

Adjust the radio on startup or restore the active
state the last time the ignition was switched to
SToP.

radio off delay

Adjust the setting.

Adjust Aux vol.

Adjust the settings.

Touch Screen Audio - Telematic System

192

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

if the "DAB" radio station being listened
to is not available, the "AF" alternative
frequency option is crossed out.

DAB (Digital Audio Broadcasting) radio

Select the audio source.

Display the name and number of the
multiplex service being used.

Alternative frequency.

Adjust audio settings.

Select preset radio stations.

next "Multiplex".
next radio station.

Display the "DAB" band.

Select a radio station from
"All", "Genres", "Multiplex".

Previous "Multiplex".
Previous radio station.

Display name and
"radiotext" for the current
station.

Preset station.
Short press: select preset radio station.
Long press: preset a radio station.

Touch Screen Audio - Telematic System

193

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Select the "navigate" tab.

Press repeatedly on "rAdIO" to
display the "DAB radio".

Select a list from the filters offered:
"All", "Genres", Multiplex" then
select a radio station.

Press the "update" button to update
the list of "DAB radio" stations
received.

dAB / FM auto tracking

digital radio

"DAB" does not cover 100% of the
territory.
When the digital radio signal is weak,
the "AF" (alternative frequencies)
option allows you to continue listening
to the same station, by automatically
switching to the corresponding "FM"
analogue station (if there is one).

When the system switches to analogue
radio, there is a difference of few
seconds with sometimes a change in
volume.
When the digital signal is restored, the
system automatically changes back to
"DAB".

Digital radio provides higher quality
reception and also the graphical display
of current information on the radio
station being listened to.
The range of multiplexes available is
displayed in alphabetical order.

if the "DAB" station being listened to
is not available, the sound will cut out
while the digital signal is too weak.

Touch Screen Audio - Telematic System

194

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Media

Level 1

Level 2

Level 3

Touch Screen Audio - Telematic System

195

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

comment

MEdIA

Briefly press the buttons to play the previous/next
track.
Press and hold the buttons for fast forward or
back in the track selected.

MEdIA

navigate

currently playing

navigate and select tracks on the active device.
The selection possibilities depend on the device
connected or the type of CD inserted.

Artists

Albums

Genres

tracks

Playlists

Audio books

Podcasts

MEdIA

Source

cd

Select the desired audio source from those
available or insert a device intended for this
purpose, the system starts playing the source
automatically.

Aux

uSB

Bluetooth

Sources connected

Pair a Bluetooth audio device.

Add device

Tel. connect.

MEdIA

Info

Information

Display information on the track playing.

Touch Screen Audio - Telematic System

196

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

Touch Screen Audio - Telematic System

197

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

comment

MEdIA

random

Press the button to play the tracks on the CD,
USB, iPod or Bluetooth device in random order.

MEdIA

repeat

Press the button to activate this function.

MEdIA

Audio

Equaliser

Adjust the bass, mid-range and treble.

Balance / Fade

Bass

Adjust the balance of the speakers, front and rear,
left and right.
Press the button in the middle of the arrows to
balance the adjustments.

Mid-range

Treble

Volume / Speed

Select the desired setting, the option is
highlighted.

Loudness

optimise audio quality at low volume.

Automatic radio

Adjust the radio on startup or restore the active
state the last time the ignition was switched to
SToP.

radio off delay

Adjust the setting.

Adjust Aux vol.

Adjust the setting.

Touch Screen Audio - Telematic System

198

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

uSB player

The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
reduce the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the
ignition is switched off or connection of a USB
memory stick. However, the audio system
memorises these lists and if they are not
modified, the loading time will be shorter.

insert a USB memory stick or connect a
peripheral device to the USB port in the central
storage space, provided for transferring data to
the system, using a suitable cable
(not supplied).

Auxiliary socket (Aux)

Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).

Located on the centre console, this port is used
only for powering and recharging the portable
device connected.

uSB port

First adjust the volume on your portable device
(to a high level). Then adjust the volume of your
audio system.
Control is via the portable device.

The functions of the device connected to the
"AUX" socket are controlled directly from the
device itself: changing track / folder / playlist or
starting/ending/pausing play using the audio
system control panel or steering mounted
controls is therefore not possible.
Do not leave the cable of your portable device
connected to the AUX socket when not in use,
to avoid possible noises from the speakers.

Touch Screen Audio - Telematic System

199

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Selection of source

Select the source.

Select the "Source" tab to display
the carousel of audio sources.

Press on "MEdIA".

Use the play settings in the screen.
Press the "random

" and/or "repeat" button to

activate them, press again to deactivate them.

The audio system plays audio files with ".wav,
.wma, .mp3" extensions and bit rate between
32 Kbps and 320 Kbps.
With audio files .aac, .m4a, .m4b, .mp4
extensions, the sampling rates supported
are 8 - 96 KHz.
it also supports .m3u and .wpl mode.

Use only USB memory sticks formatted FAT32
(File Allocation Table).
The system does not manage devices with a
capacity greater than 64 GB.

it is advisable to restrict file names to
20 characters, without using of special
characters (e.g.: " " ? ; ù) to avoid any playing
and displaying problems.

Information and advice

The system supports USB mass
storage devices, BlackBerry

®

devices

or Apple

®

players via USB ports. The

adaptor cable is not supplied.
Control of the peripheral device is with
the audio system controls.
other peripherals, not recognised on
connection, must be connected to the
auxiliary socket using a Jack cable (not
supplied).

it is recommended that official Apple

®

USB cables are used to ensure correct
operation.

The system does not support two
identical devices connected at the
same time (two memory sticks, two
Apple

®

players) but it is possible to

connect one memory stick and one
Apple

®

player at the same time.

Touch Screen Audio - Telematic System

200

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Bluetooth

®

audio streaming

Streaming allows audio files on your telephone
to be played via the vehicle's speakers.

Press "MEdIA".
if there is an active media source,
press the "Source" button.

Select the "Bluetooth" media source
then press the "Add device" button.

Switch on Bluetooth on the device.

Some Bluetooth devices do not allow
scanning of tracks and information on
the telephone against the categories
present in the system.

if the procedure fails, deactivate Bluetooth and
then activate it again on your device.

Select for the name of the device and when
requested by the audio system, enter the Pin
number displayed in the screen of the system
or confirm in the device the Pin displayed.

When the pairing procedure has completed, a
screen page appears:
-

reply "Yes" to the question, the Bluetooth
audio device will be saved as favourite (the
device will have priority over other devices
paired subsequently).

-

reply "no", priority will be determined
according to the order of connection. the
last device connected will have the highest
priority.

During pairing, a screen page is displayed
showing the progress in the operation.

if no peripheral device has yet been paired with
the system, a special page is displayed in the
screen.

Select "Yes" to start the pairing procedure, and
so search for the name of the system in the
device.

Touch Screen Audio - Telematic System

201

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

The version of software in the audio
system may not be compatible with the
generation of your Apple

®

player.

connecting Apple

®

players

Connect the Apple

®

player to the USB port

using a suitable cable (not supplied).
Play starts automatically.

Control is via the audio system.

The classifications available are those
of the portable device connected
(artists / albums / genres / tracks /
playlists / audio books / podcasts).
The default classification used is by
artist. To modify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.

Touch Screen Audio - Telematic System

202

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

navigation

Level 1

Level 2

Level 3

Touch Screen Audio - Telematic System

203

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

comment

nAV

Go to...

Home

Select "Go to", to define the destination in many ways and
not just by entering an address.

Favourite

Address

recent destination

Point of interest

My position
Latitude/Longitude
Position of last stop

display map

Display the map for the route for a preview using the map
navigator.

Plan a route

Use the navigation system to plan a route in advance,
selecting the start point and the destination.

Services

Use traffic information to minimise the impact of traffic
delays on your journey.

Settings

Modify the appearance and operation of the navigation
system.
Most of the system settings are accessible by pressing
"Settings" in the main menu.

Help

Call assistance

Access to information on assistance services or other
specialised services.

Go to assistance

Where am I?
What can I say?

Demonstrations

Safety and other guides

End

Touch Screen Audio - Telematic System

204

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

Touch Screen Audio - Telematic System

205

AUDIO

and

TELEMA

TICS

10

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Level 2

Level 3

comment

nAV

Speed limit (if known).
To see the difference between the desired time of arrival
and estimated time of arrival.
Touch this part of the status bar to switch between 3D and
2D map.

nAV

Go to...

When the navigation system starts up for the first time,
the "Driving mode" and detailed information on the
current position are displayed.
Touch the middle of the screen to open the main menu.

display map

Plan a route

Services

Settings

Help

End

nAV

details

Display instructions

The route overview gives a preview of the route, the
remaining distance to the destination and an estimate of
the remaining travelling time.
With rDS-TMC data, the route overview also shows
traffic information related to delays on the route.

Display the map of the route

Display demo of the route

route overview

Display the destination

Display traffic on the route

Modify route

Modify the destination

The navigation system helps in arriving at the destination
as quickly as possible by displaying an faster alternative
route when available.

Avoid roadblocks

Calculate alt route...

Go via...

Avoid part of the route

Minimise delays

End

nAV

navigation instructions for the rest of the route and
distance to the next instruction. if the second instruction
is less than 150 metres from the first, its is displayed
immediately instead of the distance.
Touch this part of the status bar to repeat the last voice
instruction.

Touch Screen Audio - Telematic System

206

jumper_en_Chap10a_Autoradio-Fiat-tactile-1_ed01-2015

Level 1

Telephone

Level 2

Level 3