Citroen C-Crosser Dag (2008 year). Manual — part 2
CRUISE
I N S T R U M E N T S a n d C O N T R O L S
I
20
INSTRUMENT PANEL INDICATOR LIGHTS
Indicator lights
is on
Cause
Observations
Left-hand
direction
indicator
Flashing
with
buzzer
This fl ashes when you
press the lights stalk
down.
If this indicator light fl ashes abnormally quickly,
this could indicate that the electric bulb of one
of the direction indicators has blown. Change
the bulb or contact a CITROËN dealer.
Right-hand
direction
indicator
Flashing
with
buzzer
This fl ashes when you
push the lights stalk up.
If this indicator light fl ashes abnormally quickly,
this could indicate that the electric bulb of one
of the direction indicators has blown. Change
the bulb or contact a CITROËN dealer.
Main beam
headlamps
Fixed
This comes on when
you pull the lights stalk
towards you.
Pull the stalk to return to dipped headlamps.
Side lights
Fixed
This comes on when
the lights stalk is in the
“Side lights” or “Dipped
headlamps” position.
Turn the stalk to the position required.
Front fog
lamps
Fixed
This comes on when you
use the front fog lamps.
Turn the ring on the stalk forwards to switch on
the fog lamps.
Rear fog lamps
Fixed
This comes on when you
use the rear fog lamps.
Turn the ring on the stalk forwards to switch on
the fog lamps.
Cruise control
Fixed
This comes on when the
mode is active.
Press the “ON/OFF” button to activate/
deactivate the mode.
I N S T R U M E N T S a n d C O N T R O L S
I
21
Indicator lights
is on
Cause
Observations
Diesel
pre-heating
Fixed
This comes on when the
ignition switch is at ON.
Wait until this light has switched off before
starting.
The duration for which this is displayed is
determined by the exterior climatic conditions.
Warning lights
is on
Cause
Observations
Handbrake /
Brake fl uid
level
Fixed
This comes on for a
few seconds when the
ignition is turned to “ON”
then switches off.
It is accompanied by a message on the
instrument panel display.
The handbrake is
applied or has not been
released fully.
It is accompanied by a message on the
instrument panel display. Release the handbrake
to switch off the warning light.
The brake fl uid level is
too low.
It is accompanied by a message on the
instrument panel display. Top up with brake fl uid
and contact a CITROËN dealer.
Emission
control system
Fixed or
fl ashing
This comes on or
fl ashes if the system
fails.
Consult a CITROËN dealer.
It should switch off a few seconds after starting
the engine.
Battery charge
Fixed
This comes on if a
charging circuit fault
occurs.
It should switch off when the engine is started.
It is accompanied by a message on the
instrument panel display. Check the battery
terminals (refer to the “Battery” section).
I N S T R U M E N T S a n d C O N T R O L S
I
22
Warning lights
is on
Cause
Solution - action
Driver’s
seat belt not
fastened
Fixed
The driver has not
fastened or has
unfastened his seat belt.
This is accompanied by a message on the
instrument panel display.
Fasten the driver’s seat belt.
ABS
Fixed
This comes on if an
anti-lock braking system
failure occurs.
It is accompanied by a message on the
instrument panel display. The vehicle retains
conventional braking without assistance but
you are advised to stop. Have it checked by a
CITROËN dealer.
Air bags and
pretensioners
Fixed
This comes on for a
few seconds when the
ignition is turned to “ON”
then switches off.
It should switch off when the engine is started. If
it does not switch off, contact a CITROËN dealer.
This comes on if an air
bag or pretensioner
failure occurs.
It is accompanied by a message on the
instrument panel display. Have the system
checked by a CITROËN dealer without delay.
I N S T R U M E N T S a n d C O N T R O L S
I
23
Each time the engine is started: a series of warning lights and/or messages come on applying a checking self test. They
switch off after a few seconds. Engine running: the warning light or the message becomes a warning if it remains on
continuously or fl ashes. This initial warning may be accompanied by an audible signal and a message on the display. Do not
ignore these warnings.
When the cause of the appearance of the warning light or warning message has been rectifi ed, the warning disappears from
the display automatically. If the cause of the warning is not rectifi ed, you can return to the previous screen at any time by
pressing the INFO button on the fascia.
The symbol “!” is displayed.
To return to the previous screen (with the “!” symbol), you must press the INFO button several times.
INSTRUMENT PANEL DISPLAYS
Warning messages (ignition at “OFF”)
You can shut down the warning messages which show these symbols in order to move on to the next screen.
To do this, press the INFO button according to the symbol displayed.
Press
briefl y .
Press and hold .
Symbols which appear in the top right corner of the display.
Message
is on
Associated
warning
light
Cause
Solution - action
Observations
Key in
ignition
Fixed
-
The driver’s door
is open and you
have forgotten to
remove the key
from the ignition.
Turn the ignition
switch to the LOCK
position and remove
the key.
Only if the engine has
been started.
An intermittent audible
signal is heard.
Lights left
on
Fixed
-
You have
forgotten to
switch off your
lights.
Switch off your lights
by placing the stalk at
OFF.
An intermittent audible
signal is heard.
I N S T R U M E N T S a n d C O N T R O L S
I
24
Warning messages (ignition at “ON”)
Message
is on
Associated
warning
light
Cause
Solution - action
Observations
ABS
Fixed
Anti-lock braking
system (ABS)
fault.
Consult a CITROËN
dealer.
The vehicle retains
conventional braking
without assistance
but you are advised
to stop.
Braking
system
Fixed
and
The level of
brake fl uid in the
reservoir is too
low.
Stop and top up,
otherwise contact a
CITROËN dealer.
If the message
remains on after
topping up, contact a
CITROËN dealer.
Braking system
fault.
Consult a CITROËN
dealer.
It is essential
to stop.
Handbrake on
Fixed
You have moved
off with the
handbrake still
applied.
Release the handbrake.
Coolant
temperature
Flashing
-
High engine
temperature.
If the message
fl ashes ,
wait for the engine to
cool before topping up
the level, if necessary.
It is essential to
stop your vehicle in
a safe place.
Flashing
If the message
fl ashes
and the service
warning light comes
on , contact a CITROËN
dealer without delay.
Seat belt
Fixed
The driver has
not fastened or
has unfastened
his seat belt.
Fasten your seat belt.
An intermittent
audible signal is
heard above 5 mph
(8 km/h).
I N S T R U M E N T S a n d C O N T R O L S
I
25
Message
is on
Cause
Solution - action
Observations
Air bags
Fixed
Fault in the
air bags or
pretensioners.
Consult a CITROËN
dealer.
Service
Fixed
-
Problem in one
of the systems
which does not
have a specifi c
message.
Stop the vehicle and
contact a CITROËN
dealer.
To identify the problem,
contact a CITROËN
dealer.
Engine oil
pressure
Fixed
-
Engine oil
pressure too low
or fault in the oil
circuit.
Stop the vehicle and
contact a CITROËN
dealer.
Engine oil
level
Fixed
-
Engine oil level
too low.
Stop the vehicle and
check the level using
the dipstick.
If there is a lack of oil,
top up the level.
Fuel level
warning
Fixed
-
The fuel tank
level is low.
Fill your fuel tank as
soon as possible.
Fuel circuit
Fixed
-
Fuel circuit fault.
Consult a CITROËN
dealer.
Accesses
not closed
correctly
Fixed
-
One of the doors
or the tailgate
is not closed
correctly.
Close the door or the
tailgate.
The access concerned
is indicated on the
display.
I N S T R U M E N T S a n d C O N T R O L S
I
26
Message
is on
Associated
warning
light
Cause
Solution - action
Observations
Dynamic
stability
control
system (ASC)
Fixed
-
Dynamic stability
control system
(ASC) fault.
Consult a CITROËN
dealer.
Four wheel
drive system
Fixed
-
Four wheel drive
transmission
system fault.
Consult a CITROËN
dealer.
Four wheel
drive system
temperature
Fixed
-
The temperature
of the four wheel
drive transmission
system is too
high.
Stop the vehicle and
contact a CITROËN
dealer.
The vehicle switches
to front wheel
drive (2 WD) mode
automatically.
Automatic
headlamp
adjustment
system
Fixed
-
The automatic
headlamp
adjustment is
faulty.
Consult a CITROËN
dealer.
Only on vehicle fi tted
with xenon bulbs.
Battery
charge
Fixed
Battery charge
fault.
Stop the vehicle and
contact a CITROËN
dealer.
Exterior
temperature
Fixed
-
The exterior
temperature 3 °C
(37 °F) or below.
Road icy.
Pay attention and
drive slowly.
Caution: The road may
be icy even when this
screen is not displayed.
I N S T R U M E N T S a n d C O N T R O L S
I
27
Message
is on
Associated
warning
light
Cause
Solution - action
Observations
Saturation of
the particle
emission fi lter
Fixed
-
Start of saturation
of the particle
emission fi lter.
As soon as traffi c
conditions permit,
regenerate the fi lter
by driving at a speed
of at least 35 mph
(60 km/h) until the
message is cleared.
If the message is still
displayed, contact a
CITROËN dealer.
Diesel
additive level
Fixed
-
Low diesel
additive level.
Have the level topped
up by a CITROËN
dealer without delay.
Water in the
diesel fi lter
(according to
country)
Fixed
-
The presence
of water in the
diesel fi lter is
indicated.
Risk of damage
to the injection
system on Diesel
engines.
Contact a CITROËN
dealer without delay.
I N S T R U M E N T S a n d C O N T R O L S
I
28
Prevention messages
Information messages (ignition at “ON”)
Message
is on
Status of the system
2WD two wheel
drive system
Flashing
When the “2WD” (2 wheel drive) mode is selected using the
transmission mode selector.
4WD four wheel
drive system
Flashing
When the “4WD” (4 wheel drive) mode is selected using the
transmission mode selector.
This mode is the default mode.
4WD LOCK four
wheel drive system
Flashing
When the “LOCK” (4 wheel drive) mode is selected using the
transmission mode selector.
Dynamic stability
control system
(ASC)
Fixed
When the dynamic stability control system (ASC) is active.
Exterior
temperature
Fixed
This indicates the exterior temperature.
When the vehicle is stationary or if the speed is below 12 mph
(20 km/h) the temperature displayed may not correspond to the
exterior temperature.
Display
is on
Cause
Solution - action
Observations
Service
indicator
Fixed
Informs the driver of
the time remaining
before the vehicle’s
scheduled service.
Consult a
CITROËN dealer.
This is displayed for a few
seconds when the ignition is
switched on.
Break
advised
Fixed
Informs the driver that
he should stop to take
a break.
You are advised to
take a break.
This is displayed when the
driving time that you set
previously is reached.
An audible signal is heard
3 times and is then heard every
5 minutes until the vehicle stops.
I N S T R U M E N T S a n d C O N T R O L S
I
29
The total distance is
displayed in zone 1
of the display and the
trip distance in zone 2
(refer to the “Distance
recorders” section).
Distance recorder (A and B)
INFORMATION ON THE
INSTRUMENT PANEL DISPLAY
Data displays
With the ignition on, press the INFO
button, located on the fascia to the
left of the instrument panel, to display
the various information displays in
succession:
-
the distance recorder A,
-
the distance recorder B,
-
the service indicator,
-
the coolant temperature,
-
the range,
-
the trip computer,
-
the setting menu.
This
displays
the
distance and the number
of
months
remaining
before the next service
to be carried out in
accordance
with
the
manufacturer’s servicing
schedule (refer to the
“Service indicator” section).
Service indicator
When the engine is
running, this indicates
the temperature of the
coolant (refer to the
“Coolant temperature
indicator” section).
Coolant temperature
When the engine is
running, this indicates
the number of miles
(kilometres) which can
still be travelled with
the fuel remaining in the
tank in relation to the
average
consumption
over the last few miles
(kilometres) travelled (refer to the
“Range” section).
Range
This
indicates
the
average
consumption,
the average speed and
the current consumption
(refer
to
the
“Trip
computer” section).
Trip computer
When the vehicle is
stationary , this allows
the user to change the
following
parameters
(refer to the “Function
parameters” section):
- the display language,
- the temperature dis-
play unit,
-
the fuel consumption unit,
-
the option to reinitialise the aver-
age consumption and the average
speed,
-
the break (rest) reminder display in-
terval.
Setting menu
I N S T R U M E N T S a n d C O N T R O L S
I
30
The total distance is
displayed in zone 1 of
the display and the trip
distance in zone 2 .
DISTANCE RECORDERS (A / B)
System for measuring the total distance
travelled by the vehicle during its
service life and the distance travelled in
a day or other period until it is reset to
zero by the driver.
Zero reset
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.
When the engine is
running, this indicates
the temperature of the
coolant.
COOLANT TEMPERATURE
If the bar is close to
the
critical
position
located on the right, the
temperature is too high.
The symbol fl ashes when your engine
is overheating.
It is imperative that you stop your
vehicle safely.
Wait a few minutes before switching
off the engine.
Wait for the engine to cool
before topping up the level. The
cooling system is pressurised.
When the engine is
running , this indicates
the distance which can
still be travelled with the
fuel remaining in the tank
in relation to the average
consumption over the
last few miles/kilometres
travelled.
RANGE
When the range is less than 30 miles
(50 km) , dashes are displayed.
Fill the fuel tank as soon as possible.
The display of the range is updated.
As the cooling system is pressurised, to
avoid any risk of scalding, unscrew the
cap by two turns to allow the pressure
to drop.
When the pressure has dropped,
remove the cap and top up the level, if
necessary.
Consult a CITROËN dealer.
This fi gure may increase following a
change in the style of driving or the
relief, resulting in a reduction in the
current consumption.
If you only add a few litres, the
value displayed will be incorrect.
Therefore, you must fi ll the tank
whenever possible.
When
you
disconnect
the
battery,
the
previous
consumption data is lost and
the value displayed will be different
from that displayed before the battery
was disconnected. The distance
displayed must be considered an
approximate indication.
I N S T R U M E N T S a n d C O N T R O L S
I
31
SERVICE INDICATOR
Resetting the service indicator
to zero
Your CITROËN dealer carries out this
operation after each service.
If you have carried out your vehicle’s
service
yourself,
the
zero
reset
procedure is the following:
switch off the ignition,
press the INFO button several times
in succession until the service indi-
cator is displayed.
press and hold the INFO button for
a few seconds until the spanner
fl ashes .
press the INFO button while the
spanner is fl ashing to change the
display “---” to “CLEAR” then the
time remaining before the next serv-
ice is due is displayed.
Service overdue
Operation
When the ignition is switched on, you
must press the INFO button several
times in succession until the service
indicator is displayed. The distance
recorder display line indicates the
number of miles (kilometres) remaining
and the time elapsed line indicates the
number of months remaining before the
next service is due.
After
a
certain
distance
and
a
certain time, the displaying of “---”
is
reinitialised
and
the
display
indicates the time remaining before
the next service is due.
System which informs the driver when
the next service is due in accordance
with
the
manufacturer’s
servicing
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
-
the distance travelled (in miles
(km)),
-
the time elapsed since the last serv-
ice (in months).
The distance remaining to be travelled
may be weighted by the time factor,
depending on the user’s driving habits.
Example: the display indicates that
7300 miles (kilometres) remain before
the next service is due.
The symbol “---” remains displayed
until the fi rst service of a new vehicle
has been carried out.
Example: the display indicates that the
service is overdue. This service must
be carried out by a CITROËN dealer.
Each time the ignition is switched on,
the display “SCHEDULED SERVICE”
is displayed for a few seconds to
indicate that the service must be carried
out without delay.
I N S T R U M E N T S a n d C O N T R O L S
I
32
System
which
provides
current
information about the route travelled.
TRIP COMPUTER
Average
consumption
(l/100km or km/l or
mpg)
This
is
the
average
quantity of fuel consumed
since the last zero reset.
This fi gure may increase following a
change in the style of driving or the
relief resulting in a reduction in the
current consumption.
Average speed
(km/h or mph)
This is the average
speed calculated since
the last zero reset.
Resetting the information to
zero
Automatic
If the ignition remains in the “ACC”
(Accessories) position for at least
4 hours, the average consumption value
is reset to zero automatically.
If dashes “---” are displayed for long
periods in place of the digits while
driving, contact a CITROËN dealer.
Current
consumption
(l/100km or km/l or
mpg)
This is the average
quantity
of
fuel
consumed during the
last few seconds of
driving.
Data displays
With the ignition on, press the INFO
button on the fascia, to the left of the
instrument panel, several times in
succession to display the different
information:
-
the average consumption,
-
the average speed,
-
the current consumption.
When the required information is
displayed, press the INFO button for
more than two seconds.
When the ignition is switched on, the
zero reset switches automatically from
manual mode to automatic mode.
I N S T R U M E N T S a n d C O N T R O L S
I
33
When the vehicle is
stationary ,
it
allows
the user to change the
following parameters:
- the choice of the reini-
tialisation of the aver-
age consumption and
average speed,
-
the fuel consumption unit,
-
the temperature display unit,
-
the display language,
-
activation/deactivation of the INFO
button sound,
-
the break (rest) reminder display in-
terval,
-
restore the manufacturer’s param-
eters.
FUNCTION PARAMETERS
System which provides access to
certain function parameters.
In order to change the settings,
it is essential that you stop
the vehicle and switch on the
ignition.
Apply the handbrake and place the
gear lever in neutral.
When the vehicle is moving ,
the functions setting display is not
displayed when you press the INFO
button.
With the ignition on , press the INFO
button on the fascia, to the left of the
instrument panel, several times in
succession until the “SETTING MENU”
screen is displayed.
Operation
press and hold the INFO button for
a few seconds to display the menus
screen.
Press and hold the INFO button
for a few seconds to return to the
previous screen.
When the menus screen is displayed,
if no operation is carried out within
15 seconds, the function parameters
screen is displayed.
on the menus screen, press the
INFO button to select a function
from the list:
MENU 1/2 :
-
1 - 2 (choice of the reinitialisation of
the average consumption and aver-
age speed),
-
UNIT (choice of the fuel consump-
tion units),
-
choice of the temperature display
unit ,
-
LANGUAGE (choice of the display
language),
MENU 2/2:
-
a/b (choice of displaying a different
language on the instrument panel
display and the navigation display),
-
activation / deactivation of the
INFO button sound ,
-
ALERT (changing of the “BREAK
ADVISED” break reminder display
interval),
-
REINITIALISE (restore the manu-
facturer’s parameters).
Choice of the reinitialisation of
the average consumption and
average speed
You can choose between two average
consumption
and
average
speed
reinitialisation modes:
-
automatic reinitialisation
( choice 1) ,
-
manual reinitialisation (choice 2) .
On the menus screen:
press the INFO button to select:
press and hold the INFO button for
a few seconds to switch in succes-
sion from reinitialisation mode 1
(automatic) to reinitialisation mode
2 (manual) .
The mode selected is confi rmed.
I N S T R U M E N T S a n d C O N T R O L S
I
34
Choice of the fuel consumption
units
You can choose between different units
for displaying the fuel consumption.
On the menus screen:
press the INFO button to select
“UNIT” .
press and hold the INFO button for
a few seconds to display the “UNIT”
screen.
press the INFO button to scroll the
units (km/L, L/100km, mpg(US),
mpg(UK) and PREVIOUS) in suc-
cession.
press and hold the INFO button for
a few seconds to confi rm your se-
lection.
In this case, the distance, speed and
quantity of fuel units will also be changed
in accordance with your choice of fuel
consumption unit.
If the battery is disconnected, the
parameter memory is cleared and
the default unit (km/L) is restored
automatically.
Choice of the temperature
display unit
You can choose between different units
for displaying the temperature.
On the menus screen:
press the INFO button to select
the temperature unit param-
eters symbol (thermometer).
press and hold the INFO button for
a few seconds to scroll the units
(°C and °F) in succession.
The mode selected is confi rmed.
If the battery is disconnected, the
parameter memory is cleared and
the default unit (°C) is restored
automatically.
I N S T R U M E N T S a n d C O N T R O L S
I
35
Choice of the display language
(LANGUAGE)
You can choose between different
languages for the display.
On the menus screen:
press the INFO button to select
“LANGUAGE” .
press and hold the INFO button for
a few seconds to display the “LAN-
GUAGE” screen.
press the INFO button to scroll the
languages (Japonais, English, Deutsch,
Français, Espanol, Italiano, “---” and
PREVIOUS) in succession.
press and hold the INFO button
for a few seconds to confi rm your
selection.
If you select the parameter “---”,
no message will be displayed in
message display situations.
If the battery is disconnected, the
parameter memory is cleared and
the default language (ENGLISH) is
restored automatically.
Activation / deactivation of the
“INFO” button sound
You can activate or deactivate the INFO
button sound.
On the menus screen:
press the INFO button to
select the INFO button
sound activation / deacti-
vation symbol (located on
menu 2/2) .
press and hold the INFO button
for a few seconds to scroll the
choices (ON, OFF) in succession.
The mode selected is confi rmed.
If the battery is disconnected, the
parameter memory is cleared and
the default choice (ON) is restored
automatically.
Changing the display interval
of the “BREAK ADVISED”
message
You can change the display interval of
the “BREAK ADVISED” message.
On the menus screen:
press the INFO button to select
“ALERT” (located on menu 2/2) .
press and hold the INFO button
for a few seconds to display the
“ALERT” screen.
press the INFO button to select
the display interval of the “BREAK
ADVISED” message.
press and hold the INFO button for
a few seconds to confi rm.
If the battery is disconnected, the
parameter memory is cleared and
the default value (OFF) is restored
automatically.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст