Citroen Jumpy (2016 year). Manual — part 25
.
383
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
As a safety measure and because it
requires the sustained attention of
the driver, using a smartphone when
driving is prohibited.
Operation must be with the vehicle
stationary
.
The synchronisation of a
smartphone allows applications on a
smartphone that are adapted to the
MirrorLink
TM
technology to be displayed
in the vehicle's screen.
The principles and standards
are constantly evolving. For the
communication process between
the smartphone and the system to
work correctly, the smartphone must
be unlocked; update the operating
system of your smartphone as
well as the date and time in the
smartphone and the system
.
For the list of eligible smartphones,
connect to the brand's internet website
in your country.
The "MirrorLink
TM
" function requires
the use of a compatible smartphone
and applications.
There may be a wait for the availability
of applications, depending on the
quality of your network.
When connecting a smartphone to
the system, it is recommended that
Bluetooth
®
be started on the smartphone
Depending on the smartphone, it may be
necessary to activate the "MirrorLink
TM
" function.
During the procedure, several screen
pages relating to certain functions
are displayed.
Accept to start and end the
connection.
Connect a USB cable. The
smartphone charges when
connected by a USB cable.
Press "MirrorLink
TM
" to start the
application in the system.
Once connection is established, a page
is displayed with the applications already
downloaded to your smartphone and adapted
to MirrorLink
TM
technology.
Access to the different audio sources remains
accessible in the margin of the MirrorLink
TM
display, using touch buttons in the upper bar.
Access to the menus for the system is possible
at any time using the dedicated buttons
From the system, press on
"Connectivity to display the primary
page.
As a safety measure, applications
can only be viewed with the vehicle
stationary; display is interrupted once
the vehicle is moving.
384
12:13
23 °C
531 kHz
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Level 3
.
385
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Level 3
Comments
Connectivity
MirrorLink
TM
Go to or return to the applications already
downloaded to your smartphone and adapted to
MirrorLink
TM
technology.
Go to a menu list depending on the application
chosen.
"Back": abandon the current operation, go up
one level.
"Home": go to or return to the "Car mode" page
on your smartphone.
Go to the primary page of the "Connectivity"
menu.
386
12:13
23 °C
531 kHz
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
CarPlay
®
smartphone connection
.
387
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
As a safety measure and because it
requires the sustained attention of
the driver, using a smartphone when
driving is prohibited.
Operation must be with the vehicle
stationary
.
The synchronisation of a
smartphone allows applications on a
smartphone that are adapted to the
CarPlay
®
technology to be displayed
in the vehicle's screen, having first
activated the CarPlay
®
function in your
smartphone.
As the principles and standards
are constantly changing, it is
recommended that you keep your
smartphone's operating system
updated
.
For the list of eligible smartphones, go
to the brand's internet website in your
country.
Connect a USB cable. The
smartphone charges when
connected by a USB cable.
Connect a USB cable. The
smartphone charges when
connected by a USB cable.
Press "Telephone" to display the
CarPlay
®
interface.
Press "CarPlay" to display the
CarPlay
®
interface.
On connecting the USB cable, the
CarPlay
®
function deactivates the
system's Bluetooth
®
mode.
In the system, press "Connectivity"
to display the primary page.
Or
388
FM/87.5 MHz
87.5MHz
12:13
23 °C
87.5 MHz
2
1
4
3
FM/87.5 MHz
87.5MHz
12:13
87.5 MHz
23 °C
AM/531 kHz
PO
kHz
12:13
23 °C
531 kHz
2
1
3
4
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Radio Media
Level 1
Level 2
Radio stations
.
389
3
2
4
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Comments
Radio Media
Source
Radio
Select change of source.
USB
iPod
AUX
Bluetooth
Radio Media
Frequency /
Presets
Frequency
Carry out an automatic or manual search for
radio stations.
Presets
Make a long press on an empty location to preset
a station.
Radio Media
Band
FM
Press Band to change waveband.
DAB
AM
Radio Media
List
Radio stations
Open the list of radio stations and press on a
radio station to select it.
390
1
9
6
7
8
5
10
11
13
14
15
12
9
9
6
6
7
7
8
8
5
5
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Radio-media options
Audio settings
Audio settings
Audio settings
Radio settings
Radio stations
.
391
5
12
8
6
13
14
15
9
7
10
11
1
1
1
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Comments
Radio Media
Secondary page
Audio settings
Ambience
Select the sound ambience.
Distribution
Sound distribution by the Arkamys
®
system.
Sound
Adjust the volume or activate volume linked to
speed.
Voice
Adjust the voice volume.
Ringtone
Adjust the ringtone volume.
Confirm
Save settings.
Radio Media
Secondary page
Radio settings
General
Activate or deactivate settings.
Announcements
Confirm
Save settings.
Radio Media
Secondary page
Radio stations
FM
Display the list of radio stations for the band
selected.
DAB
AM
Presets
Select a preset radio station.
Frequency
Enter a frequency manually.
Change the screen display mode.
Update the list according to reception.
392
21
1
17
18
19
20
16
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Radio-media options
Photos
USB
.
393
17
20
18
21
19
1
1
16
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Level 1
Level 2
Comments
Radio Media
Secondary page
Music files
Albums
Choose a selection mode.
Artists
Genres
Playlists
Folders
Radio Media
Secondary page
Managing photos
USB
Display photos.
The system supports the following image
formats: .gif, .jpg, .jpeg, .bmp, .png, .raw and .tiff
with a maximum file size of 10 Mb per image.
394
1
2
2
2
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Press Radio Media to display the
menu.
Press the "OPTIONS
" button to go to
the secondary page.
Press "Frequency
".
Press "Frequency
".
Enter the values using the virtual
keypad.
First enter the units then click on the
decimals zone to enter the figures
after the decimal point.
Press one of the buttons for an
automatic search for radio stations.
Press Radio Media to display the
primary page.
Radio
Selecting a station
Radio reception may be affected by
the use of electrical equipment not
approved by the brand, such as a USB
charger connected to the 12 V socket.
The exterior environment (hills,
buildings, tunnel, car park, below
ground...) may prevent reception,
even in RDS station tracking mode.
This phenomenon is normal in the
propagation of radio waves and is in no
way indicative of a fault with the audio
system.
Select "Radio stations" in the
secondary page.
Or
Or
Move the cursor for a manual search
for frequencies up or down.
Select a radio station or frequency (refer to the
corresponding section).
Press "Presets
".
Make a long press on one of the
buttons to preset the station.
Preset a station
Press "Confirm
".
.
395
1
1
10
10
11
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Press Radio Media to display the
primary page.
Press Radio Media to display the
primary page.
Press the "OPTIONS
" button to go to
the secondary page.
Press the "OPTIONS
" button to go to
the secondary page.
Select "Radio settings
".
Select "Radio settings
".
Select "General
".
Select "General
".
Select "Announcements
".
Activate/deactivate "Station follow".
Activate / Deactivate "Display radio
text
".
Activate / Deactivate "Traffic
announcement
".
Activate/ Deactivate RDS
RDS, if activated, allows you to continue
listening to the same station by automatic
retuning to alternative frequencies. However,
in certain conditions, coverage of an RDS
station may not be assured throughout the
entire country as radio stations do not cover
100 % of the territory. This explains the loss
of reception of the station during a journey.
Press "Confirm
".
Press "Confirm
".
Press "Confirm
".
The "radiotext" function allows
information transmitted by the radio
station and related to the station or the
song playing to be displayed.
Display text information
Play TA messages
The TA (Traffic Announcement)
function gives priority to TA alert
messages. To operate, this function
needs good reception of a radio station
that carries this type of message. While
traffic information is being broadcast,
the current media is automatically
interrupted so that the TA message can
be heard. Normal play of the media
previously playing is resumed at the
end of the message.
396
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Display of options:
if active but not available,
the display will be greyed
out.
if active and available, the
display will be clear.
Display "Radiotext" for the
current station.
Switch between the page with the presets and the page
with the frequencies.
Change of band.
Display of the name of the current station
and "multiplex" being listened to, also
called an "ensemble".
Display of the list of radio
stations.
Next "multiplex".
Next radio station.
Secondary page.
Select audio source.
Previous "Multiplex".
Previous radio station.
DAB radio (Digital Audio Broadcasting)
Terrestrial Digital Radio
If the current "DAB" station is not available on
"FM" the "DAB/FM" option is greyed out.
.
397
1
10
3
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Select the audio source.
Press Radio Media to display the
primary page.
Press "Band" to select the "DAB"
waveband.
Press Radio Media to display the
primary page.
Press the "OPTIONS
" button to go to
the secondary page.
DAB / FM auto tracking
Digital radio
"DAB" does not cover 100% of the
territory.
When the digital radio signal is poor,
"DAB/FM auto tracking" allows you to
continue listening to the same station,
by automatically switching to the
corresponding "FM" analogue station
(if there is one).
If "DAB / FM auto tracking" is activated,
there is a difference of a few seconds
when the system switches to "FM"
analogue radio with sometimes a
variation in volume.
Once the digital signal is restored,
the system automatically changes back
to "DAB".
Digital radio provides higher quality
reception.
The different multiplexes offer a
choice of radio stations arranged in
alphabetical order.
If the "DAB" station being listened to
is not available on "FM" ("DAB/FM"
option greyed out), or "DAB/FM auto
tracking" is not activated, the sound
will cut out while the digital signal is too
weak.
Select "Radio settings
".
Select "General
".
Activate / Deactivate "Station
follow
".
Press "Confirm
".
398
Audio and Telematics
Jumpy_en_Chap10b_NAC-1_ed01-2016
Media
USB player
Selecting the source
Select "Source
".
Press Radio Media to display the
primary page.
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the
ignition is switched off or connection of a USB
memory stick. The lists are memorised: if they
are not modified, the subsequent loading time
will be shorter.
Insert the USB memory stick into the USB port
or connect the USB device to the USB port
using a suitable cable (not supplied).
Auxiliary (AUX) socket
First adjust the volume of your portable device
(to a high level). Then adjust the volume of your
audio system.
Display and management of the controls are
via the portable device.
This source is only available if "Auxiliary input"
has been checked in the audio settings.
Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).
Choose the source.
Bluetooth
®
audio streaming
Streaming allows you to listen to music from
your telephone.
The Bluetooth profile must be activated. First
adjust the volume on your portable device (to a
high level).
Then adjust the volume of your audio system.
If play does not start automatically, it may be
necessary to start the audio playback from the
telephone.
Control is from the portable device or by using
the audio system buttons.
Once connected in streaming mode,
the telephone is considered to be a
media source.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст