Citroen DS4 (2017 year). Manual — part 22
5
8
6
9
7
10
11
1
1
335
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Comments
Radio Media
Secondary page
Radio list
Save
Press a radio station to select it.
Update list
Update the list of stations received.
Frequency
Enter the desired radio frequency.
Confirm
Save the settings.
Radio Media
Secondary page
Photos
Home screen
Display the selected photo in the home page.
Rotate
Rotate the photo 90°.
Select all
Select all the photos in the list.
Press again to deselect.
Slideshow
Previous photo.
Display the photos in sequence, full-screen.
The system supports the following image formats:
.gif, .jpg, .bmp, .png.
Pause / Play.
Next photo.
Full screen
Display the selected photo full-screen.
1
19
19
19
20
20
20
21
21
21
336
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Media
Settings
Settings
Settings
1
1
21
20
19
337
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Level 2
Level 3
Comments
Radio Media
Secondary page
Media list
Presentation of the last media used.
Radio Media
Secondary page
Settings
Media
Settings
Shuffle (all tracks)
Choose the play settings.
Shuffle (current album)
Repeat
Aux. amplification
Radio
Settings
RDS options
Activate or deactivate the settings.
DAB/FM station tracking
Display Radio Text
Digital radio slideshow
display
Announcements
Settings
Traffic announcements (TA)
Activate or deactivate the settings.
News - Weather
Sport - Programm info
Flash - Unforeseen
events
Confirm
Save the settings.
2
3
3
1
338
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Press on Radio Media
to display the
primary page.
Press on Radio Media
to display the
primary page.
Select "Save
".
If necessary, select change of
source.
Press on Radio Media
to display the
primary page.
Select change source.
"AM Radio
".
By automatic frequency search
Select "FM Radio
".
"AM Radio
".
Press on the secondary page.
Select a preset radio station
in the list.
Select "FM Radio
".
Select a radio station from
the list offered.
Select "Update list" to refresh the
list.
Select "List
" in the primary page.
Press on Radio Media
to display the
primary page.
Radio
Changing a radio frequency
Selecting a station
To select a preset radio station.
THEN
Radio reception may be affected by
the use of electrical equipment not
approved by CITROËN, such as a USB
charger connected to the 12 V socket.
The exterior environment (hills,
buildings, tunnel, car park, below
ground...) may prevent reception,
even in RDS station tracking mode.
This phenomenon is normal in the
propagation of radio waves and is in no
way indicative of a fault with the audio
system.
Or
Select "Radio list
" in the secondary
page.
Or
Press 3 or 4
to move the cursor for an
automatic search down or up for a radio
frequency.
Or
1
1
20
5
4
2
7
339
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Select a radio station or frequency (refer to the
corresponding section).
Press on Radio Media
to display the
primary page.
Press on the secondary page.
Select "Settings
".
Select "Radio
".
Activate/deactivate "RDS
options
".
Press on Radio Media
to display the
primary page.
Press on the secondary page.
Press on "Save
" (preset).
Select a number in the list to preset the
previously chosen radio station.
A long press on a number saves (presets) the
station.
Press on Frequency
.
Enter the frequency in full (e.g.:
92.10 MHz) using the keypad then
"Confirm
".
Changing radio station
Pressing the name of the current radio station
brings up a list.
To change radio station press the name of the
desired station.
Or
Press on Radio Media
to display the
primary page.
Select "Save
" (preset).
Presetting a station
Activating / Deactivating RDS
OR
THEN
A press on this button presets all of
the stations one after the other.
Recalling preset stations
RDS, if activated, allows you to continue
listening to the same station by automatic
retuning to alternative frequencies.
However, in certain conditions, coverage
of an RDS station may not be assured
throughout the entire country as radio
stations do not cover 100 % of the
territory. This explains the loss of
reception of the station during a journey.
340
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Display of options:
if active but not available, the display will be greyed out,
if active and available, the display will be blank.
Display of "Radiotext" for
the current station.
Select the audio source.
Display the "DAB" band.
Display of the name of the
current station.
Short-cut: access to the choice of audio
source and the list of stations (or titles,
depending on the source).
Select the radio station.
Any thumbnail broadcast by
the station.
Preset stations, buttons 1
to 15.
Short press: select the
preset radio station.
Long press: preset a radio
station.
Next "Multiplex".
Next radio station.
Secondary page.
Display the name and
number of the "multiplex"
service being used.
Previous "Multiplex".
Previous radio station.
DAB (Digital Audio Broadcasting) radio
If the "DAB" radio station being listened to is not
available on "FM", the "DAB FM" option is greyed out.
Journaline
®
is a text-based information service designed for digital radio systems.
It provides text-based information structured around topics and sub-topics.
This service is available from the "LIST OF DAB STATIONS" page.
3
1
20
341
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Select change of source.
Press on Radio Media
to display the
primary page.
Select "DAB Radio
".
Select "List
" in the primary page.
Select the radio station from the list offered.
Press on Radio Media
to display the
primary page.
Press on the secondary page.
Select "Settings
".
Select "Radio
".
Select "Digital/FM auto
tracking" then "Confirm
".
DAB / FM auto tracking
Digital radio
"DAB" does not cover 100% of the
territory.
When the digital radio signal is poor,
"DAB/FM station tracking" allows you to
continue listening to the same station,
by automatically switching to the
corresponding "FM" analogue station
(if there is one).
Digital radio provides higher quality
reception and also the graphical display
of current information on the radio
station being listened to. Select "List" in
the primary page.
The range of multiplexes available is
displayed in alphabetical order.
If the "DAB" station being listened to
is not available on "FM" ("DAB/FM"
option greyed out), or "DAB/FM station
tracking" is not activated, the sound
will cut out while the digital signal is too
weak.
If "DAB/FM station tracking" is
activated, there is a difference of a few
seconds when the system switches to
"FM" analogue radio with sometimes a
variation in volume.
When the digital signal is restored, the
system automatically changes back to
"DAB".
or
Select "Radio list
" in the secondary
page.
3
342
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Media
USB port
Selecting the source
First adjust the volume of your portable device
(to a high level). Then adjust the volume of your
audio system.
Display and management of the controls are
via the portable device.
The steering mounted SRC (source)
button can be used to go to the next
media source, available if the source
is active.
Press on OK
to confirm the selection.
Select change of source.
Press on Radio Media
to display the
primary page.
To protect the system, do not use a USB
hub.
Insert the USB memory stick into the USB port
or connect the USB device to the USB port
using a suitable cable (not supplied).
Auxiliary socket (AUX)
CD player
Insert the CD in the player.
This source is only available if the "Auxiliary
socket" option has been activated in the
"Media" settings.
Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).
Choose the source.
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the
ignition is switched off or on connection of a
USB memory stick. The lists are memorised: if
they are not modified, the subsequent loading
time will be shorter.
343
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
The audio system will only play audio files
with ".wma, .aac, .flac, .ogg and .mp3" file
extensions and with a bit rate of between
32 Kbps and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of file (.mp4, etc.) can be played.
".wma" files must be of the standard wma 9
type.
The sampling rates supported are 32, 44 and
48 KHz.
In order to be able to play a recorded CDR or
CDRW, when recording it is preferable to select
the ISO 9660 level 1, 2 or Joliet standard.
If the disc is recorded in another format it may
not be played correctly.
It is recommended that the same recording
standard is always used for an individual disc,
with as low a speed as possible (4x maximum)
for optimum sound quality.
In the particular case of a multi-session CD, the
Joliet standard is recommended.
It is advisable to restrict file names to
20 characters, without using of special
characters (e.g. " " ? ; ù) to avoid any playing
and displaying problems.
Information and advice
Use only USB memory sticks formatted FAT 32
(file allocation table).
The system supports USB mass
storage devices, BlackBerry
®
devices
or Apple
®
players via USB ports. The
adaptor cable is not supplied.
Control of the peripheral device is with
the audio system controls.
Other peripherals, not recognised on
connection, must be connected to the
auxiliary socket using a Jack cable (not
supplied).
It is recommended that the USB cable
for the portable device is used.
To protect the system, do not use a
USB hub.
345
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Bluetooth
®
audio streaming
Streaming allows audio files on your telephone
to be played through the vehicle's speakers.
Connect the telephone: see the "Telephone"
section, then "Bluetooth
".
Choose the "Audio" or "All
" profile.
If play does not start automatically, it may be
necessary to start the audio playback from the
telephone.
Control is from the peripheral device or by
using the audio system buttons.
Once connected in streaming mode,
the telephone is considered to be a
media source.
It is recommended that you activate
"Repeat
" on the Bluetooth
®
peripheral.
Connecting Apple
®
players
Connect the Apple
®
player to the USB port
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
The classifications available are those
of the portable device connected
(artists / albums / genres / playlists /
audiobooks / podcasts).
The default classification used is by
artist. To modify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.
The version of software in the audio system
may not be compatible with the generation of
your Apple
®
player.
1
2
3
3
3
4
4
4
5
5
5
6
6
6
7
7
7
346
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Settings
Level 2
Audio settings
Audio settings
Audio settings
Choice of color scheme
2
3
4
5
6
7
347
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Level 2
Comments
Settings
Audio settings
Ambience
Choose the sound ambience.
Balance
Sound distribution using the Arkamys
®
system.
Sound effects
Set the volume or activate the link to vehicle
speed.
Ringtones
Set the telephone ringtone and volume.
Voice
Set the volume and voice for speaking street
names
Confirm
Save your settings.
Settings
Turn off screen
Function that turns off the display.
Pressing the screen reactivates it.
Settings
Color schemes
Confirm
Choose the color scheme, then confirm to save
the setting.
1
8
8
9
9
10
10
348
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Units
Display screen
Configuration
Adjust date and time
Factory settings
Level 1
Level 2
1
8
9
10
1
1
349
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Level 1
Level 2
Comments
Settings
Secondary page
System Settings
Units
Set the units used to display distance, fuel
consumption and temperature.
Delete data
Select the desired data in the list then press
Delete.
Factory settings
Return to factory settings.
Confirm
Save the settings.
Settings
Secondary page
Time/Date
Confirm
Set the date and time then confirm.
Settings
Secondary page
Screen settings
Activate automatic text scrolling
Activate or deactivate the setting then confirm.
Activate animations
Confirm
1
350
Audio and Telematics
DS4_en_Chap10b_SMEGplus_ed01-2016
Choice of language
Calculator
Configuration
Calendar
Level 1
Level 2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст