Ford F150 Pickup. Manual — part 1078
Fig. 221: Identifying Engine Special Tool(s)
Courtesy of FORD MOTOR CO.
Removal
1. Remove the hood.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
2. On A/C equipped vehicles, recover the air conditioning system. For additional information,
refer to CLIMATE CONTROL SYSTEM - GENERAL INFORMATION .
3. Drain the cooling system. For additional information, refer to ENGINE COOLING .
4. Relieve the fuel pressure. For additional information, refer to FUEL SYSTEM
PRESSURE RELEASE .
5. Disconnect the battery ground cable. For additional information, refer to BATTERY,
MOUNTING AND CABLES - F150 PICKUP .
6. Remove the sight shield.
1. Remove the screws.
2. Remove the sight shield.
Fig. 222: Removing Sight Shield
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
7. Remove the UPPER INTAKE MANIFOLD . For additional information, refer to
UPPER INTAKE MANIFOLD .
8. Remove the intake manifold spacer assembly. For additional information, refer to INTAKE
MANIFOLD - SPACER ASSEMBLY .
9. Remove the radiator, fan blade assembly, and fan shroud. For additional information, refer
to ENGINE COOLING .
10. Disconnect the fuel pressure regulator vacuum connector and the Intake Manifold Runner
Control (IMRC) electrical connector.
Fig. 223: Disconnecting Fuel Pressure Regulator Vacuum Connector & IMRC
Electrical Connector
Courtesy of FORD MOTOR CO.
11. Disconnect the Exhaust Gas Recirculation (EGR) valve vacuum connector.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 224: Disconnecting Exhaust Gas Recirculation Valve Vacuum Connector
Courtesy of FORD MOTOR CO.
12. Position the power steering reservoir aside.
1. Remove the bolts.
2. Position the power steering reservoir aside.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст