Ford F150 Pickup. Manual — part 822
Fig. 202: Installing Exhaust Manifold To EGR Valve Tube - 4.6L
Courtesy of FORD MOTOR CO.
Windsor Engine (5.4L)
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
11. Install the exhaust manifold to EGR valve tube.
Tighten both fittings starting at the top in two stages.
Stage 1: Hand-tighten.
Stage 2: Tighten to 40-60 Nm (30-44 lb-ft).
Connect the two differential pressure feedback EGR system hoses.
Fig. 203: Installing Exhaust Manifold To EGR Valve Tube - 5.4L
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
All Vehicles
Fig. 204: Connecting Crankcase Ventilation Tube To Valve Cover
Courtesy of FORD MOTOR CO.
12. Connect the crankcase ventilation tube to the valve cover.
13. Install the engine air cleaner (ACL) and air cleaner outlet pipe. .
14. Install the power steering fluid reservoir and bracket.
1. Position the power steering fluid reservoir and bracket.
2. Install the bolts.
NOTE:
4.6L engine shown; 5.4L engine similar.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст