Ford F150 Pickup. Manual — part 1081

Fig. 233: Disconnecting Block Heater Cable
Courtesy of FORD MOTOR CO.

27. Remove the four three-way catalytic converter-to-exhaust manifold nuts (two each side).

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 234: Removing Three-Way Catalytic Converter-To-Exhaust Manifold Nuts
Courtesy of FORD MOTOR CO.

28. Remove the starter motor. For additional information, refer to STARTER MOTOR .

29. Remove the transmission bolts.

If equipped with automatic transmission, refer to AUTOMATIC
TRANSAXLE/TRANSMISSION-4R100 or AUTOMATIC
TRANSAXLE/TRANSMISSION-4R70W .

If equipped with manual transmission, refer to MANUAL TRANSMISSION .

30. If equipped with manual transmission, remove the clutch. For additional information, refer

to CLUTCH .

31. Remove the engine support insulator through bolts.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 235: Removing Engine Support Insulator Through Bolts
Courtesy of FORD MOTOR CO.

32. Lower the vehicle.

33. Install the special tool.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup

Fig. 236: Installing Special Tool
Courtesy of FORD MOTOR CO.

34. Using the special tool, remove the engine.

2003 Ford Pickup F150

2003 ENGINE Engine - 4.2L - F150 Pickup