Ford F150 Pickup. Manual — part 1670
Fig. 36: Installing Floor Duct Panel
Courtesy of FORD MOTOR CO.
Vehicles equipped with floor console
10. Install the floor console. Refer to CONSOLE -- FLOOR .
All vehicles
11. Connect the battery ground cable.
VACUUM CONTROL MOTOR - PANEL/FLOOR DOOR
Removal
1. Remove the floor duct. Refer to FLOOR DUCT .
2. Remove the panel/floor door vacuum control motor.
NOTE:
Rotate the vacuum control motor to disconnect the vacuum control motor
rod from the panel/floor door.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
1. Disconnect the vacuum line connector.
2. Remove the vacuum control motor screws.
3. Slide the rod out of the door and remove the panel/floor door vacuum control motor.
Fig. 37: View Of Removing Panel/Floor Door Vacuum Control Motor
Courtesy of FORD MOTOR CO.
Installation
1. To install, reverse the removal procedure.
VACUUM CONTROL MOTOR - PANEL/DEFROST DOOR
Removal
1. Remove the panel/defrost door vacuum control motor (18A318).
1. Disconnect the vacuum line.
2. Remove the push nut.
3. Remove the screws.
4. Remove the panel/defrost door vacuum control motor.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Fig. 38: View Of Removing Panel/Defrost Door Vacuum Control Motor
Courtesy of FORD MOTOR CO.
Installation
1. To install, reverse the removal procedure.
AMBIENT AIR TEMPERATURE SENSOR
Removal and Installation
1. Remove the pin-type retainers and remove the radiator sight shield.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Fig. 39: Identifying Pin-Type Retainers
Courtesy of FORD MOTOR CO.
2. Disconnect the connector.
2003 Ford Pickup F150
2003 HVAC Control Components - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст