Ford F150 Pickup. Manual — part 1002
5. Remove the water pump bolts.
Fig. 31: Removing Water Pump Bolts
Courtesy of FORD MOTOR CO.
6. Remove the (A) water pump from the (B) cylinder block (6010).
z
Clean and inspect the mating surfaces.
2003 Ford Pickup F150
2003 ENGINE Engine Cooling - F150 Pickup
Fig. 32: Removing Water Pump From Cylinder Block
Courtesy of FORD MOTOR CO.
Installation
CAUTION: Some vehicle cooling systems are filled with Motorcraft Premium
Engine Coolant VC-4-A (in Oregon VC-5, in Canada CXC-10) or
equivalent meeting Ford specification ESE-M97B44-A (Green color).
Others are filled with Motorcraft Premium Gold Engine Coolant VC-7-
A or equivalent meeting Ford specification WSS-M97B51-A1 (Yellow
color). Always fill the cooling system with the same coolant that is
present in the system. Do not mix coolant types.
2003 Ford Pickup F150
2003 ENGINE Engine Cooling - F150 Pickup
Fig. 33: Installing Water Pump
Courtesy of FORD MOTOR CO.
1. Install the water pump.
2003 Ford Pickup F150
2003 ENGINE Engine Cooling - F150 Pickup
1. Lubricate with engine coolant and install the O-ring seal.
2. Position the (A) water pump on the (B) engine.
3. Loosely install the bolts.
2. Tighten the bolts in the sequence shown.
Fig. 34: Identifying Water Pump Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
3. Position the (A) water pump pulley on the (B) water pump and loosely install the bolts.
2003 Ford Pickup F150
2003 ENGINE Engine Cooling - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст