Ford F150 Pickup. Manual — part 1091
Fig. 273: Removing Camshaft
Courtesy of FORD MOTOR CO.
35. Remove the bearing covers.
1. Remove the engine dynamic balance shaft bearing cover.
2. Remove the camshaft bearing cover.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 274: Removing Bearing Covers
Courtesy of FORD MOTOR CO.
36. Remove the oil pump screen cover and pickup tube.
1. Remove the nuts.
2. Remove the two bolts.
3. Remove the oil pump screen cover and tube.
4. Remove and discard the gasket
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 275: Removing Oil Pump Screen Cover & Pickup Tube
Courtesy of FORD MOTOR CO.
37. Remove the oil pan baffle.
1. Remove the nuts.
2. Remove the oil pan baffle.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 276: Removing Oil Pan Baffle
Courtesy of FORD MOTOR CO.
38. If necessary, remove the ridge at the top of the cylinder.
1. Turn the crankshaft until the piston to be worked on is at the bottom of the cylinder
bore.
2. Place a clean rag on top of the piston to protect the piston face.
3. Use the Cylinder Ridge Reamer to remove the ridge.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст