Ford F150 Pickup. Manual — part 493
41. Install the three bolts.
Fig. 151: Installing Three Bolts
Courtesy of FORD MOTOR CO.
CAUTION: Press against the bearing inner cone only.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 152: Installing Differential Bearing
Courtesy of FORD MOTOR CO.
42. Using a suitable press and the special tool, install the differential bearings.
1. Position the appropriate differential bearing (RH or LH).
2. Using a suitable press and the special tool, install the differential bearing.
z
Repeat the procedure for the other differential bearing.
NOTE:
Make sure the indicator needle is in the spreader adapter hole.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 153: Installing Special Tools
Courtesy of FORD MOTOR CO.
43. Install the special tools.
44. Spread the axle housing to the specification.
z
Remove the Dial Indicator.
CAUTION: Overspreading can damage the axle housing.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Fig. 154: Spreading Axle Housing To Specification
Courtesy of FORD MOTOR CO.
45. If removed, position the differential bearing shims.
1. Apply a light coating of Premium Long Life Grease XG-1-C or equivalent meeting Ford
specification ESA-M1C75-B to one side of the differential bearing shims to help hold them in
place.
2. Position the differential bearing shims.
CAUTION: Never attempt to drive the differential bearing shim in place.
Permanent damage to the machined axle housing surfaces can
occur.
2003 Ford Pickup F150
2003 DRIVELINE/AXLES Front Drive Axle/Differential - Ford 8.8-Inch - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст