Ford F150 Pickup. Manual — part 1701
Fig. 93: Removing Condenser Core
Courtesy of FORD MOTOR CO.
7. To install, reverse the removal procedure.
z
Install new O-rings lubricated in clean PAG oil.
z
Lubricate the refrigerant system with the correct amount of clean PAG oil. Refer to CLIMATE
CONTROL SYSTEM .
MANIFOLD AND TUBE ASSEMBLY - 4.2L
Material
2003 Ford Pickup F150
2003 HVAC Air Conditioning - F150 Pickup
Fig. 94: Manifold And Tube Assembly - 4.2L Material Specifications
Courtesy of FORD MOTOR CO.
Removal and Installation
1. Disconnect the battery ground cable.
2. Recover the refrigerant. Refer to CLIMATE CONTROL SYSTEM .
3. Remove the bolt and detach the manifold and tube assembly.
z
Discard the O-ring seals.
2003 Ford Pickup F150
2003 HVAC Air Conditioning - F150 Pickup
Fig. 95: Identifying Bolt For Detaching Manifold And Tube Assembly
Courtesy of FORD MOTOR CO.
4. Disconnect the A/C pressure cutoff switch electrical connector.
2003 Ford Pickup F150
2003 HVAC Air Conditioning - F150 Pickup
Fig. 96: Disconnecting A/C Pressure Cutoff Switch Electrical Connector
Courtesy of FORD MOTOR CO.
5. Disconnect the manifold and tube fitting.
z
Discard the O-ring seal.
2003 Ford Pickup F150
2003 HVAC Air Conditioning - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст