Ford F150 Pickup. Manual — part 1111
Fig. 351: Installing Lower Intake Manifold
Courtesy of FORD MOTOR CO.
54. Position the lower intake manifold.
1. Apply a bead of silicone gasket and sealant to the lower intake manifold mounting at
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
the points indicated.
2. Position the lower intake manifold.
55. Install the (A) long bolts and the (B) short bolts.
Fig. 352: Locating Lower Intake Manifold Long & Short Bolts
Courtesy of FORD MOTOR CO.
56. Tighten the bolts in two stages, following the sequence shown.
1. Stage 1: Tighten the bolts to 5 Nm (44 lb-in).
2. Stage 2: Tighten the bolts to 10 Nm (89 lb-in).
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 353: Lower Intake Manifold Bolt Tightening Sequence
Courtesy of FORD MOTOR CO.
57. Install the RH valve cover.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 354: Installing RH Valve Cover
Courtesy of FORD MOTOR CO.
58. Install the LH valve cover.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст