Ford F150 Pickup. Manual — part 14
Fig. 6: Identifying Hand-Held Transmitter Button And Universal Transmitter Button
Courtesy of FORD MOTOR CO.
5. Use both hands to press the hand-held transmitter button and the desired button on the universal
transmitter. Do not release either button.
6. Hold down both buttons until the red light on the universal transmitter flashes, first slowly and then
rapidly. Release both buttons when the rapid flashing begins. The universal transmitter has successfully
learned the new frequency signal and can be used in place of the hand-held transmitter(s).
NOTE:
If the hand-held transmitter appears to program the universal transmitter
but does not open the garage door, the garage door opener may have a
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Remote Convenience - F150 Pickup
7. To operate, simply press the appropriate button on the universal transmitter. The red light is on while the
signal is being transmitted.
Training a Garage Door Opener Equipped With "Rolling Codes"
1. Program the hand-held transmitter to the universal transmitter. Refer to PROGRAMMING .
2. Train the garage door opener receiver to recognize the universal transmitter.
1. Remove the cover panel from the garage door opener receiver.
2. Locate the training button on the garage door opener receiver. Location and color of the button may
vary by garage door opener manufacturer. Refer to the garage door opener manual instruction or
call HomeLink(R) customer assistance at 1-800-355-3515.
3. Press the training button on the garage door opener receiver for 1-2 seconds.
4. Press the programmed universal transmitter button for as long as the universal transmitter red light
flashes (1-2 seconds). Release the button and re-press the button to confirm that the universal
transmitter is trained to the receiver.
5. The garage door opener should recognize the universal transmitter.
Erasing Channels
1. To erase all three programmed channels, hold down the two outside buttons until the red light begins to
flash (20-30 seconds). Release both buttons.
"code protected" or "rolling code" feature.
NOTE:
Individual channels cannot be erased, but can be reprogrammed using the
procedures for programming. Refer to PROGRAMMING .
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Remote Convenience - F150 Pickup
2003 ACCESSORIES AND EQUIPMENT
Module Communications Network - F150 Pickup
SPECIFICATIONS
GENERAL SPECIFICATIONS
Fig. 1: General Specifications Chart
Courtesy of FORD MOTOR CO.
DESCRIPTION AND OPERATION
COMMUNICATIONS NETWORK
Module Communications Network Components
z
powertrain control module (PCM)
z
restraint control module (RCM)
2003 Ford Pickup F150
2003 ACCESSORIES AND EQUIPMENT Module Communications Network - F150 Pickup
2003 Ford Pickup F150
2003 ACCESSORIES AND EQUIPMENT Module Communications Network - F150 Pickup
DIAGNOSIS AND TESTING
COMMUNICATIONS NETWORK
Refer to COMPUTER DATA LINES for schematic and connector information.
Special Tool(s)
Fig. 2: Special Tools
Courtesy of FORD MOTOR CO.
z
instrument cluster
z
4-wheel anti-lock brake (4WABS) control module
z
generic electronic module (GEM)
z
central security module (optional)
z
natural gas vehicle module (NGVM)
2003 Ford Pickup F150
2003 ACCESSORIES AND EQUIPMENT Module Communications Network - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст