Ford F150 Pickup. Manual — part 812
Fig. 163: Cleaning Sealing Surfaces - Intake Manifold Supercharged
Courtesy of FORD MOTOR CO.
22. Clean the sealing surfaces.
Installation
1. Position the gaskets.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 164: Positioning Intake Manifold Gaskets - Supercharged
Courtesy of FORD MOTOR CO.
CAUTION: If the PCV system hose becomes disconnected, the intake
manifold will have to be removed to reattach the hose.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Fig. 165: Locating PCV System Hose - Supercharged
Courtesy of FORD MOTOR CO.
2. Make sure that the PCV system hose is securely connected.
3. Install the intake manifold.
Position the manifold.
Position the thermostat outlet.
Install the bolts. Tighten the bolts in two stages in the sequence shown.
Stage 1: Tighten to 2 Nm (18 lb-in).
Stage 2: Tighten to 25 Nm (18 lb-ft).
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
2003 Ford Pickup F150
2003 ENGINE Engine - 4.6L & 5.4L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст