Ford F150 Pickup. Manual — part 182
Fig. 76: Removing Driver Side B-Pillar Trim Panel
Courtesy of FORD MOTOR CO.
NOTE:
The safety belt retractor pretensioner electrical connector has been
removed for clarity.
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Seating - F150 Pickup
Fig. 77: Disconnecting Driver Side Safety Belt Retractor Pretensioner Electrical Connector
Courtesy of FORD MOTOR CO.
52. Push in to release the tab and disconnect the driver side safety belt retractor pretensioner electrical
connector.
53. Attach the restraint system diagnostic tool to the driver side safety belt retractor pretensioner electrical
connector.
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Seating - F150 Pickup
Fig. 78: Attaching Restraint System Diagnostic Tool To Driver Side Safety Belt
Courtesy of FORD MOTOR CO.
All vehicles
54. Connect the battery ground cable.
55. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental
restraint system (SRS). Refer to SYSTEM OPERATION CHECK .
56. Disconnect the battery ground cable and wait at least one minute.
Reactivation
All vehicles
1. Disconnect the battery ground cable and wait at least one minute.
WARNING:
To reduce the risk of serious personal injury, read and follow all
warnings, cautions, and notes at the beginning of the deactivation
procedure.
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Seating - F150 Pickup
SuperCrew with safety belt retractor pretensioners
2. Remove the restraint system diagnostic tool from the driver side safety belt retractor pretensioner
electrical connector.
Fig. 79: Removing Restraint System Diagnostic Tool From Driver Side Safety Belt
Courtesy of FORD MOTOR CO.
3. Connect the driver side safety belt retractor pretensioner electrical connector.
2003 Ford Pickup F150
2003 ACCESSORIES AND BODY, CAB Seating - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст