Ford Focus RS (2011 year). Manual — part 51
E51751
18
17
16
N
14
19
15
Description
Item
Front door latch electrical connector
14
Front door handle, lock and latch retaining
bracket
See Removal Detail
See Installation Detail
15
Front door latch remote control cable
See Removal Detail
16
Front exterior door handle remote control
cable
See Removal Detail
17
Description
Item
Front door latch retaining bracket retaining
rivet
18
Front door latch
See Removal Detail
See Installation Detail
19
13. To install, reverse the removal procedure.
14. Vehicles with global closing, initialize the
door window motors.
For additional information,
refer to: Door
Window Motor Initialization
(501-11 Glass,
Frames and Mechanisms, General
Procedures).
Removal Details
Item 1
Exterior mirror interior trim panel
CAUTION: Do not place excessive strain
on the exterior mirror and front door
tweeter speaker wiring harness.
G410714en
501-14-
87
Handles, Locks, Latches and Entry Systems
501-14-
87
REMOVAL AND INSTALLATION
See Removal Detail
Item 5
Door hinge retaining bolts
TIE41214
1.
CAUTION: Protect the door using a soft
cloth to prevent damage to the front door.
With the aid of another technician and a
suitable trolly jack, support and detach the
front door from the front door hinges.
Item 6
Door (left-hand door shown)
1. Detach the electrical connector from the
A-pillar.
TIE41215
2. Remove the front door.
• Disconnect the electrical connector.
TIE41216
3.
CAUTION: After the front door wiring
harness electrical connector has been
disconnected, position the front door back
onto the front door hinges. Failure to follow
this instruction may cause damage to the
front door.
Position the front door onto the front door
hinges.
Item 9
Front door wiring harness retaining clip
1. Detach the front door wiring harness
retaining clip from the front door.
E47330
Item 10
Front door latch remote control cable
1. Using a suitable screwdriver, latch the front
door lock into the closed position.
E52756
2. Detach the front door latch remote control
cable from the front door latch remote
control handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
G410714en
501-14-
88
Handles, Locks, Latches and Entry Systems
501-14-
88
REMOVAL AND INSTALLATION
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 11
Front door wiring harness
1. Detach and push the front door wiring
harness into the front door.
E47360
Item 12
Front door lock actuator retaining screw
1. Detach the front door lock actuator.
1. Loosen the door lock actuator retaining
screw.
2. Release the door lock actuator retaining clip.
3. Slide the door lock actuator towards the front
of the vehicle.
E51955
1
2
3
Item 13
Front door inner panel
CAUTION: When removing the front door
inner panel, care must be taken that the
door wiring harness is not trapped or
placed under excessive strain.
Item 15
Front door handle, lock and latch
retaining bracket
1. Press in the centers of the front door handle,
lock and latch retaining bracket retaining clip
locking pins.
E51961
Item 16
Front door latch remote control cable
1. NOTE: Do not kink the front door latch
remote control cable.
NOTE: In order to remove the front door latch
remote control cable from the front door latch lever
the cable must be rotated.
Disconnect the front door latch remote
control cable from the front door latch.
1. Using a suitable screwdriver, release the
front door latch remote control cable locking
tangs from the front door latch.
2. Detach the front door latch remote control
outer cable from the front door latch.
3. Rotate the front door latch remote control
cable.
1
1
2
3
E52633
G410714en
501-14-
89
Handles, Locks, Latches and Entry Systems
501-14-
89
REMOVAL AND INSTALLATION
Item 17
Front exterior door handle remote
control cable
1. NOTE: Do not kink the front exterior door
handle remote control cable.
NOTE: In order to remove the front exterior door
handle remote control cable from the front door
latch lever the cable must be rotated.
Disconnect the front exterior door handle
remote control cable from the front door
latch.
1. Using a suitable screwdriver, release the
front exterior door handle remote control
outer cable locking tangs from the front door
latch.
2. Detach the front exterior door handle remote
control cable from the front door latch.
3. Rotate the front exterior door handle remote
control cable.
E52634
1
1
2
3
Item 18
Front door latch retaining bracket
retaining rivet
1. Using a suitable
Electric hand drill remove
and discard the door latch retaining bracket
retaining rivet.
Item 19
Front door latch
1. Detach the front door latch actuator from the
front door handle, lock and latch retaining
bracket.
1. Press the front door handle, lock and latch
retaining bracket release clip.
2. Slide the front door handle, lock and latch
retaining bracket out of the front door latch.
E51962
2
1
2. Detach the front door lock cylinder actuator
rod from the front door latch.
Installation Details
Item 19
Front door latch
1. Connect the front door lock cylinder actuator
rod to the front door latch.
2. Install the front door latch.
• Using a suitable
Rivet gun
install a new front
door latch rivet.
E41506
G410714en
501-14-
90
Handles, Locks, Latches and Entry Systems
501-14-
90
REMOVAL AND INSTALLATION
Item 15
Front door handle, lock and latch
retaining bracket
1. Install the front door handle, lock and latch
retaining bracket to the door inner panel.
2. From the back of the front door handle, lock
and latch retaining bracket press in the
retaining clip locking pins.
E51961
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Front door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts
1. Apply a coating
of adhesive to
the door hinge
center retaining
bolts.
G410714en
501-14-
91
Handles, Locks, Latches and Entry Systems
501-14-
91
REMOVAL AND INSTALLATION
Front Door Latch — 3-Door, Vehicles With: Keyless Vehicle
System
General Equipment
Electric hand drill
Rivet gun
Materials
Specification
Name
WSK-M2G349-A7
Adhesive - Loctite 243
1. Remove the front door trim panel.
For additional information,
refer to: Front
Door Trim Panel - 3-Door
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
2. Remove the exterior front door handle.
For additional information,
refer to: Exterior
Front Door Handle - Vehicles With: Keyless
Vehicle System
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Connect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
4. Remove the front door window regulator
grommets.
E42003
5. NOTE: Support the front door power window
control unit.
Connect the front door power window control
switch electrical connector.
E39524
6. Using the front door power window control
switch, align the window glass clamp
retaining bolts with the access holes.
E42003
7. Loosen the front door window glass clamp
retaining bolts.
TIE39519
8 Nm
8. Raise the front door window glass.
G413499en
501-14-
92
Handles, Locks, Latches and Entry Systems
501-14-
92
REMOVAL AND INSTALLATION
9. Disconnect the front door power window
control switch electrical connector.
E39524
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G413499en
501-14-
93
Handles, Locks, Latches and Entry Systems
501-14-
93
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G413499en
501-14-
94
Handles, Locks, Latches and Entry Systems
501-14-
94
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст