Ford Focus RS (2011 year). Manual — part 22
Auto-Dimming Interior Mirror
Removal
1. Remove the auto-dimming interior mirror
upper trim panel.
1. Release the clips.
2. Pull the auto-dimming interior mirror upper
trim panel rearwards.
TIE0037284
1
2
1
2. Remove the auto-dimming interior mirror
lower trim panel.
1. Release the clips.
2. Pull the auto-dimming interior mirror lower
trim panel downwards.
TIE0037285
1
1
2
3. Disconnect the auto-dimming interior mirror
electrical connector.
TIE0037288
4. Remove the auto-dimming interior mirror.
• Rotate the mirror bracket 60 degrees
counterclockwise.
TIE0037289
Installation
1. To install, reverse the removal procedure.
G328468en
501-09-
26
Rear View Mirrors
501-09-
26
REMOVAL AND INSTALLATION
SECTION 501-10 Seating
PAGE
CONTENTS
SPECIFICATIONS
501-10-2
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..
DIAGNOSIS AND TESTING
501-10-3
Seats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
501-10-3
Inspection and Verification. . . . . . . . . . . . . . . . . . . . . . . . ..
501-10-3
Symptom Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
501-10-4
Pinpoint Tests. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REMOVAL AND INSTALLATION
501-10-13
Front Seat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
501-10-15
(40 100 0;
40 100 4;
40 101 0)
Front Seat — 2.5L Duratec-RS (224kW/305PS) - VI5. . . . . . . . ...
501-10-16
Front Seat Armrest. . . . . . . . . . . . . . . . . . . . . . . . . . . .
501-10-17
Heated Seat Switch. . . . . . . . . . . . . . . . . . . . . . . . . . .
501-10-19
(33 797 0;
33 797 4)
Front Seat Height Adjustment Motor. . . . . . . . . . . . . . . ..
501-10-22
(33 784 0;
33 784 4)
Front Seat Track Motor. . . . . . . . . . . . . . . . . . . . ...
501-10-23
(40 108 0)
Front Seat Backrest Cover — 2.5L Duratec-ST (VI5). . . . . . . . .
501-10-26
(40 108 0)
Front Seat Backrest Cover — 2.5L Duratec-RS (224kW/305PS) - VI5. . ..
501-10-27
(40 105 0)
Front Seat Cushion Cover — 2.5L Duratec-ST (166kW/226PS) - VI5. . ...
501-10-30
(40 105 0)
Front Seat Cushion Cover — 2.5L Duratec-RS (224kW/305PS) - VI5. . ..
501-10-32
Rear Seat Backrest Cover. . . . . . . . . . . . . . . . . . . . . . . . ..
501-10-39
Rear Seat Backrest Cover — 2.5L Duratec-ST (166kW/226PS) - VI5. . . . . . . ...
501-10-41
Rear Seat Cushion Cover — 2.5L Duratec-ST (166kW/226PS) - VI5. . . . . . . .
501-10-42
Seat Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
DISASSEMBLY AND ASSEMBLY
501-10-48
Rear Seat Cushion. . . . . . . . . . . . . . . . . . . . . . . . . . . .
501-10-50
Front Seat Backrest — 3-Door. . . . . . . . . . . . . . . . . . . . . . ...
501-10-53
Front Seat Backrest — 4-Door/5-Door/Wagon. . . . . . . . . . . . . . . . ...
501-10-
Seating
501-10-
1
.
VEHICLE APPLICATION:
Torque Specifications
lb-in
lb-ft
Nm
Item
-
26
35
Front seat retaining bolts
-
17
23
Front seat cushion base retaining bolts
-
20
27
Front seat backrest retaining bolts
-
35
47
Front seat safety belt buckle and pretensioner
retaining bolt
-
18
25
Rear seat cushion retaining bolts
-
26
35
Rear seat backrest hinge retaining bolts
-
18
25
Rear seat backrest striker retaining bolts
-
26
35
Rear seat backrest outer pivot pin bush retaining
bolt
-
17
23
Rear seat backrest latch retaining bolts
-
41
55
Rear center safety belt lower anchor and buckle
assembly retaining bolt
89
-
10
Front seat height adjustment link retaining screw
44
-
5
Front seat backrest recliner motor retaining bolt
-
16
22
Rear seat backrest retaining screws - Convertible
G401838en
501-10-
2
Seating
501-10-
2
SPECIFICATIONS
Seats
Refer to Wiring Diagrams Section 501-10, for
schematic and connector information.
Inspection and Verification
1. Verify the customer concern.
2. Visually inspect for obvious signs of mechanical
or electrical damage.
Visual Inspection Chart
Electrical
Mechanical
• Fuse(s)
• Wiring harness
• Electrical
connector(s)
• Motor(s)
• Switch(es)
• Damaged switch(es)
3. If an obvious cause for an observed or reported
concern is found, correct the cause (if possible)
before proceeding to the next step.
4. If the cause is not visually evident, verify the
symptom and refer to the Symptom Chart.
Symptom Chart
Symptom Chart
Action
Possible Sources
Symptom
• CARRY OUT the Seat Control
Switch Component Test.
REFER to the Wiring Diagrams.
• Seat control switch.
• The power seat is inoperative
•
GO to Pinpoint Test A.
• Motor(s).
• Circuit(s).
• CARRY OUT the Seat Control
Switch Component Test.
REFER to the Wiring Diagrams.
• Seat control switch.
• The power seat does not move
vertically
•
GO to Pinpoint Test B.
• Motor(s).
• Circuit(s).
• CARRY OUT the Seat Control
Switch Component Test.
REFER to the Wiring Diagrams.
• Seat control switch.
• The power seat does not
recline
•
GO to Pinpoint Test C.
• Motor.
• Circuit(s).
• CARRY OUT the Seat Control
Switch Component Test.
REFER to the Wiring Diagrams.
• Seat control switch.
• The power seat does not move
horizontally
•
GO to Pinpoint Test D.
• Motor.
• Circuit(s).
• CARRY OUT the Heated Seat
Control Switch Component
Test. REFER to the Wiring
Diagrams.
• Heated seat control switch(es).
• The heated seat is inoperative
•
• Circuit(s).
G413215en
501-10-
3
Seating
501-10-
3
DIAGNOSIS AND TESTING
GO to Pinpoint Test E.
Pinpoint Tests
NOTE: Use a digital multimeter for all electrical
measurements.
PINPOINT TEST A : THE POWER SEAT IS INOPERATIVE
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
A1: CHECK FOR VOLTAGE TO THE DRIVER POWER SEAT
1 Disconnect Driver Power Seat Underseat
Connector C30.
2 Ignition switch in position II.
3 Measure the voltage between the driver power
seat C30 pin 15, circuit 29-AH35 (OG/YE),
harness side and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
TIE0019624
ൺ
No
REPAIR circuit 29-AH35 (OG/YE). TEST the
system for normal operation.
A2: CHECK THE DRIVER POWER SEAT GROUND CIRCUIT FOR CONTINUITY
1 Ignition switch in position 0.
2 Measure the resistance between the driver
power seat C30 pin 16, circuit 31-DA14 (BK),
harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
TIE0019625
Vehicles with 6-way power seats
Vehicles with 2-way power seats
ൺ
No
REPAIR circuit 31-DA14 (BK). TEST the
system for normal operation.
A3: CHECK THE DRIVER POWER SEAT CONTROL SWITCH GROUND CIRCUIT FOR CONTINUITY
1 Connect Driver Power Seat Underseat
2 Disconnect Driver Power Seat Control Switch
C755.
G413215en
501-10-
4
Seating
501-10-
4
DIAGNOSIS AND TESTING
GO to A5
.
Connector C30.
GO to A3
.
GO to A2
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
3 Measure the resistance between the driver
power seat control switch C755 pin 1, circuit 31-
DA14 (BK), harness side and ground.
• Is the resistance less than 5 ohms?
ൺ
Yes
E51577
ൺ
No
REPAIR circuit 31-DA14 (BK). TEST the
system for normal operation.
A4: CHECK THE DRIVER POWER SEAT CONTROL SWITCH POWER CIRCUIT FOR CONTINUITY
1 Ignition switch in position II.
2 Measure the voltage between the driver power
seat control switch C755 pin 2, circuit 29-AH35
(OG/YE), harness side and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
E51578
VERIFY the customer concern.
ൺ
No
REPAIR circuit 29-AH35 (OG/YE). TEST the
system for normal operation.
A5: CHECK THE DRIVER POWER SEAT CONTROL SWITCH GROUND CIRCUIT FOR CONTINUITY
1 Connect Driver Power Seat Underseat
Connector C30.
2 Disconnect Driver Power Seat Control Switch
C715.
3 Measure the resistance between the:
• driver power seat control switch C715 pin 3,
circuit 31-AH35 (BK), harness side and ground.
• driver power seat control switch C715 pin 6,
circuit 31-AH35A (BK), harness side and ground.
TIE0014346
• Are the resistances less than 5 ohms?
ൺ
Yes
ൺ
No
REPAIR circuit 31-AH35 (BK) or circuit 31-
AH35A (BK). TEST the system for normal
operation.
G413215en
501-10-
5
Seating
501-10-
5
DIAGNOSIS AND TESTING
GO to A6.
GO to A4
.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
A6: CHECK THE DRIVER POWER SEAT CONTROL SWITCH POWER CIRCUIT FOR CONTINUITY
1 Ignition switch in position II.
2 Measure the voltage between the driver power
seat control switch C715 pin 2, circuit 29-AH35
(OG/YE), harness side and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
TIE0014348
VERIFY the customer concern.
ൺ
No
REPAIR circuit 29-AH35 (OG/YE). TEST the
system for normal operation.
PINPOINT TEST B : THE POWER SEAT DOES NOT MOVE VERTICALLY
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
B1: CHECK THE DOWN VOLTAGE TO THE SEAT HEIGHT ADJUSTMENT MOTOR
1 Detach the seat assembly from the floor panel.
2 Disconnect Seat Height Adjustment Motor C759.
3 Ignition switch in position II.
4 Operate the power seat height control switch to
the DOWN position and measure the voltage
between the seat height adjustment motor C759
pin 1, circuit 33-AH38 (YE/BK), harness side
and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
E51579
ൺ
No
REPAIR circuit 33-AH38 (YE/BK). TEST the
system for normal operation.
G413215en
501-10-
6
Seating
501-10-
6
DIAGNOSIS AND TESTING
GO to B2.
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
B2: CHECK THE UP VOLTAGE TO THE SEAT HEIGHT ADJUSTMENT MOTOR
1 Operate the power seat height control switch to
the UP position and measure the voltage
between the seat height adjustment motor C759
pin 2, circuit 32-AH38 (WH/BK), harness side
and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
E51580
INSTALL a new front seat height adjustment
motor.
Installation).
TEST the system for normal operation.
ൺ
No
REPAIR circuit 32-AH38 (WH/BK). TEST the
system for normal operation.
PINPOINT TEST C : THE POWER SEAT DOES NOT RECLINE
DETAILS/RESULTS/ACTIONS
TEST CONDITIONS
C1: CHECK THE REARWARD VOLTAGE TO THE SEAT BACKREST MOVEMENT MOTOR
1 Detach the seat assembly from the floor panel.
2 Disconnect Seat Backrest Motor C760.
3 Ignition switch in position II.
4 Operate the power seat backrest control switch
to the REARWARD position and measure the
voltage between the seat backrest movement
motor C760 pin 5, circuit 33-AH36 (YE/RD),
harness side and ground.
• Is the voltage greater than 10 volts?
ൺ
Yes
E51581
ൺ
No
REPAIR circuit 33-AH36 (YE/RD). TEST the
system for normal operation.
G413215en
501-10-
7
Seating
501-10-
7
DIAGNOSIS AND TESTING
GO to C2
.
Motor
(501-10 Seating, Removal and
REFER to
:
Front Seat Height Adjustment
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст