Ford Focus RS (2011 year). Manual — part 56
2. Slide the front door exterior handle remote
control cable off of the front door handle
reinforcement retainers.
E51994
1
1
2
2. Align the front door exterior handle remote
control inner cable with the slot in the front
door handle reinforcement and remove.
E51995
Installation Details
Item 13
Front door inner panel
1. Before installing the front door inner panel
retaining bolts, feed the door wiring harness
electrical connector through the front door
wiring harness hole.
Item 12
Front door lock actuator retaining screw
1. Install the front door lock actuator to the
front door.
2. Tighten the front door lock actuator retaining
screw.
Item 5
Door hinge retaining bolts
1. Apply a coating of
adhesive to
the door hinge
retaining bolts.
G410826en
501-14-
127
Handles, Locks, Latches and Entry Systems
501-14-
127
REMOVAL AND INSTALLATION
Front Door Lock Actuator — 3-Door, Vehicles With: Keyless
Vehicle System
Materials
Specification
Name
WSK-M2G349-A7
Adhesive - Loctite 243
1. Remove the front door trim panel.
For additional information,
refer to: Front
Door Trim Panel - 3-Door
(501-05 Interior
Trim and Ornamentation, Removal and
Installation).
2. Remove the exterior front door handle.
For additional information,
refer to: Exterior
Front Door Handle - Vehicles With: Keyless
Vehicle System
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
3. Connect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General Procedures).
4. Remove the front door window regulator
grommets.
E42003
5. NOTE: Support the front door power window
control unit.
Connect the front door power window control
switch electrical connector.
E39524
6. Using the front door power window control
switch, align the window glass clamp bolts
with the access holes.
E42003
7. Loosen the front door window glass clamp
retaining bolts.
TIE39519
8 Nm
8. Raise the front door window glass.
G413505en
501-14-
128
Handles, Locks, Latches and Entry Systems
501-14-
128
REMOVAL AND INSTALLATION
9. Disconnect the front door power window
control switch electrical connector.
E39524
10. Using suitable tape, secure the front door
window glass to the front door.
E42004
11. Disconnect the battery ground cable.
For additional information,
refer to: Battery
Disconnect and Connect
(414-01 Battery,
Mounting and Cables, General
Procedures).
12. Remove the components in the order
indicated in the following illustration(s) and
table(s).
E51757
G413505en
501-14-
129
Handles, Locks, Latches and Entry Systems
501-14-
129
REMOVAL AND INSTALLATION
Description
Item
Exterior mirror interior trim panel
See Removal Detail
1
Front door tweeter speaker electrical
2
Description
Item
connector
Exterior mirror electrical connector (if
equipped)
3
E47359
6
15 Nm
5
15 Nm
23 Nm
4
N
5
N
G413505en
501-14-
130
Handles, Locks, Latches and Entry Systems
501-14-
130
REMOVAL AND INSTALLATION
Description
Item
Door check strap
4
Door hinge retaining bolts.
See Removal Detail
5
Description
Item
See Installation Detail
Door (left-hand door shown)
See Removal Detail
6
8 Nm
E51750
8
13
12
9
10
11
7
8 Nm
8 Nm
Description
Item
Front door handle, lock and latch retaining
bracket retaining screw
7
Front door latch retaining bolts
8
Front door wiring harness retaining clip
See Removal Detail
9
Front door latch remote control cable
See Removal Detail
10
Description
Item
Front door wiring harness
See Removal Detail
11
Front door lock actuator retaining screw
See Removal Detail
See Installation Detail
12
Front door inner panel
See Removal Detail
See Installation Detail
13
G413505en
501-14-
131
Handles, Locks, Latches and Entry Systems
501-14-
131
REMOVAL AND INSTALLATION
E51960
15
16
14
17
18
Description
Item
Exterior front door handle RKE electrical
connector
See Removal Detail
14
Front door lock cylinder position sensor
electrical connector
See Removal Detail
15
Front door handle reinforcement
See Removal Detail
16
Description
Item
Front door lock cylinder actuator rod
See Removal Detail
17
Front door exterior handle remote control
cable
See Removal Detail
18
13. To install, reverse the removal procedure.
14. Vehicles with global closing, initialize the
door window motors.
For additional information,
refer to: Door
Window Motor Initialization
(501-11 Glass,
Frames and Mechanisms, General
Procedures).
Removal Details
Item 1
Exterior mirror interior trim panel
CAUTION: Do not place excessive strain
on the exterior mirror and front door
tweeter speaker wiring harness.
G413505en
501-14-
132
Handles, Locks, Latches and Entry Systems
501-14-
132
REMOVAL AND INSTALLATION
Item 5
Door hinge retaining bolts.
TIE41214
1.
CAUTION: Protect the door using a soft
cloth to prevent damage to the front door.
With the aid of another technician and a
suitable trolly jack, support and detach the
front door from the front door hinges.
Item 6
Door (left-hand door shown)
1. Detach the electrical connector from the
A-pillar.
TIE41215
2. Remove the front door.
• Disconnect the electrical connector.
TIE41216
3. Push the front door wiring harness into the
door.
E47281
4.
CAUTION: After the front door wiring
harness electrical connector has been
disconnected, position the front door back
onto the front door hinges. Failure to follow
this instruction may cause damage to the
front door.
Position the front door onto the front door
hinges.
Item 9
Front door wiring harness retaining clip
1. Detach the front door wiring harness
retaining clip from the front door.
E47330
G413505en
501-14-
133
Handles, Locks, Latches and Entry Systems
501-14-
133
REMOVAL AND INSTALLATION
Item 10
Front door latch remote control cable
1. Using a suitable screwdriver, latch the front
door lock into the closed position.
E52756
2. Detach the front door latch remote control
cable from the front door latch remote
control handle.
1. Operate the door latch remote control handle
lock to the lock position.
2. Release the remote control cable retaining
clips.
3. Detach the inner remote control cable from
the remote control handle lock lever.
E52632
1
2
3
Item 11
Front door wiring harness
1. Detach and push the front door wiring
harness into the front door.
E47360
Item 12
Front door lock actuator retaining screw
1. Detach the front door lock actuator.
1. Loosen the front door lock actuator retaining
screw.
2. Release the front door lock actuator retaining
clip.
3. Slide the front door lock actuator towards the
front of the vehicle.
E51955
1
2
3
Item 13
Front door inner panel
CAUTION: When removing the front door
inner panel, care must be taken that the
door wiring harness is not trapped or
placed under excessive strain.
Item 14
Exterior front door handle RKE
electrical connector
NOTE: Make a note of the clipping position of the
exterior front door handle RKE harness.
1. Disconnect the front door handle RKE
electrical connector and detach the wiring
G413505en
501-14-
134
Handles, Locks, Latches and Entry Systems
501-14-
134
REMOVAL AND INSTALLATION
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст