Ford Focus RS (2011 year). Manual — part 67
Assemble the hood lock cylinder barrel
tumblers in the correct order.
E43309
Item 11
Hood lock cylinder barrel cover
NOTE: Make sure that the hood lock cylinder cover
guide indents align with the hood lock cylinder
barrel.
E43467
Item 7
Hood lock cylinder connecting clip
NOTE: An audible click can be heard when the
hood lock cylinder return spring cap is installed
correctly.
Item 6
Hood lock cylinder return spring
1. Install the hood lock cylinder return spring
in the same position as removed.
E59904
Item 5
Hood lock cylinder barrel cover
1. NOTE: The hood lock cylinder can only be
installed to the hood lock cylinder housing
in one position.
Install the hood lock cylinder barrel cover
into the hood lock cylinder housing.
E60448
Item 4
Hood lock cylinder barrel cover locking
clips
1. Install the hood lock cylinder barrel cover
locking clips.
E43522
G413491en
501-14-
215
Handles, Locks, Latches and Entry Systems
501-14-
215
DISASSEMBLY AND ASSEMBLY
Item 2
Hood lock cylinder locking pin
1. Using a suitable
Punch
, install the hood lock
cylinder locking pin.
E43523
Item 1
Hood lock cylinder locking pins
1. Using a suitable
Punch,
install the hood lock
cylinder locking pins.
E43524
G413491en
501-14-
216
Handles, Locks, Latches and Entry Systems
501-14-
216
DISASSEMBLY AND ASSEMBLY
Ignition Lock Cylinder — Vehicles With: Keyless Vehicle System
Disassembly
1.
Refer to: Ignition Lock Cylinder - Vehicles With:
Keyless Vehicle System
(501-14 Handles,
Locks, Latches and Entry Systems, Removal
and Installation).
2.
E115229
3.
E115227
4.
1
2
E115230
5.
E115228
6. NOTE: Make sure to read the key code from
the key entry to the end of the lock barrel in
sequence.
NOTE: Make a note of the position and
orientation of the ignition lock cylinder barrel
tumblers.
NOTE: One group of tumblers is signed with a
one digit number (1 to 5), the other group of
tumblers is signed with a two digit number (11
to 15).
G1187730en
501-14-
217
Handles, Locks, Latches and Entry Systems
501-14-
217
DISASSEMBLY AND ASSEMBLY
E115740
x10
x10
Assembly
7.
E115898
8.
E115900
9. NOTE: One group of tumblers is signed with a
one digit number (1 to 5), the other group of
G1187730en
501-14-
218
Handles, Locks, Latches and Entry Systems
501-14-
218
DISASSEMBLY AND ASSEMBLY
tumblers is signed with a two digit number (11
to 15).
E70124
x10
x10
10.
E115894
11.
E115906
12.
E115909
13.
E115226
14.
E115746
G1187730en
501-14-
219
Handles, Locks, Latches and Entry Systems
501-14-
219
DISASSEMBLY AND ASSEMBLY
15.
E115751
16.
E115902
17.
E115905
G1187730en
501-14-
220
Handles, Locks, Latches and Entry Systems
501-14-
220
DISASSEMBLY AND ASSEMBLY
Ignition Lock Cylinder — Vehicles Without: Keyless Vehicle System
General Equipment
Flat-bladed screwdriver
1. Remove the ignition lock cylinder.
For additional information,
refer to: Ignition
Lock Cylinder - Vehicles Without: Keyless
Vehicle System
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
2. Disassemble the components in the order
indicated in the following illustration(s) and
table(s).
4
5
6
7
9
2
7
8
8
E43468
3
1
G328436en
501-14-
221
Handles, Locks, Latches and Entry Systems
501-14-
221
DISASSEMBLY AND ASSEMBLY
Description
Item
Ignition lock cylinder locking button
See Disassembly Detail
See Assembly Detail
1
Ignition lock cylinder housing
See Disassembly Detail
See Assembly Detail
2
Ignition lock cylinder retaining clip
See Assembly Detail
3
Ignition lock cylinder barrel cover
4
Ignition lock cylinder retaining clip
See Disassembly Detail
See Assembly Detail
5
Ignition lock cylinder barrel guide
See Assembly Detail
6
Description
Item
Ignition lock cylinder barrel tumblers
See Disassembly Detail
See Assembly Detail
7
Ignition lock cylinder barrel tumbler springs
8
Ignition lock cylinder barrel
9
3. To assemble, reverse the disassembly
procedure.
4. Install the ignition lock cylinder.
For additional information,
refer to: Ignition
Lock Cylinder - Vehicles Without: Keyless
Vehicle System
(501-14 Handles, Locks,
Latches and Entry Systems, Removal and
Installation).
Disassembly Details
Item 1
Ignition lock cylinder locking button
E62270
1
2
1. Remove the ignition lock cylinder locking
button.
1. Using a suitable tool, release the ignition lock
cylinder locking button leaf spring and
remove the ignition lock cylinder locking
button leaf spring.
2. Detach the ignition lock cylinder locking
button from the ignition lock cylinder housing
and remove the ignition lock cylinder locking
button.
Item 2
Ignition lock cylinder housing
1. Remove the ignition lock cylinder housing.
1. Operate the ignition lock cylinder retaining
clip.
2. Slide the ignition lock cylinder housing away
from the ignition lock cylinder barrel guide.
1
2
E43472
Item 5
Ignition lock cylinder retaining clip
1. Using a suitable
Flat-bladed screwdriver
remove the
ignition lock cylinder retaining
clip.
E43471
G328436en
501-14-
222
Handles, Locks, Latches and Entry Systems
501-14-
222
DISASSEMBLY AND ASSEMBLY
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст