Ford Crown Victoria (2010 year). Manual — part 21
4. Press 3
• 4 to store the second personal code.
5. The doors will again lock then unlock to confirm programming of the
new code.
To store a third personal code:
1. Enter the factory set code.
2. Within five seconds press 1
• 2 on the keypad to enter the
programming mode.
3. Enter a third personal 5-digit code. Each number must be entered
within five seconds of each other.
4. Press 5
• 6 (or 7 • 8, or 9 • 0, or wait five seconds) to store the third
personal code.
5. The doors will again lock then unlock to confirm programming of the
new code.
Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.
• The factory set code will work even if you have set your own personal
code.
Erasing personal code
To erase all of the personal entry codes programmed to a vehicle:
1. Enter the factory-set code.
2. Press and release 1
• 2 within five seconds of step 1.
3. Press and hold 1
• 2 for two seconds. All of the vehicle doors will lock
and then unlock to confirm erasure.
Unlocking the doors and releasing the trunk with the keyless entry
system
To unlock the driver door, enter either the factory-set code or personal
code (each digit pressed within five seconds of prior digit). The interior
lamps will illuminate.
• To unlock all doors, enter the factory-set code or personal code
(driver door unlocks) and press 3
• 4 within five seconds.
• To release the trunk, enter the factory-set code or personal code
(driver door unlocks) and press 5
• 6 within five seconds.
After the factory-set code or personal code has been entered, you can
unlock all doors (press 3
• 4) and release the trunk (press 5 • 6) as
long as the controls are pressed within five seconds of each other.
Locks and Security
85
2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA (fus)
Locking doors with the keyless entry system
It is not necessary to enter the factory-set code prior to locking all doors.
To lock the doors, press 7
• 8 and press 9 • 0 at the same time.
Note: The doors will not lock if the driver door is ajar.
Anti-scan feature
If the wrong code has been entered seven times (35 consecutive button
presses), the keypad will go into an anti-scan mode. This mode disables
the keypad for one minute and the keypad lamp will flash.
The anti-scan feature will turn off after:
• one minute of keypad inactivity.
• pressing the
control on the remote entry transmitter.
• the ignition is turned to the on position.
SECURILOCK
姞 PASSIVE ANTI-THEFT SYSTEM
SecuriLock
威 passive anti-theft system is an engine immobilization
system. This system is designed to help prevent the engine from being
started unless a coded key programmed to your vehicle is used. The
use of the wrong type of coded key may lead to a “no-start” condition.
This device complies with part 15 of the FCC rules and with RSS-210 of
Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may
cause undesired operation.
Radio type approval numbers for Immobilizer System PATS XCVR
If the type approval of your immobilizer system is inspected in one of the
countries listed in the following table, refer to the corresponding
approval number:
Immobilizer System PATS XCVR certification numbers
TX Frequency: 134,2 kHz
-8,1 dBµA/m @ 10 m
Country Name
Type Approval Number
American Samoa (USA)
See USA
Bahrain
DLM/GEN/18/18/16
Barbados
340/3 Vol.II
Canada
CANADA: 3043104475A
China
CMII ID:2005DJ0428
Locks and Security
86
2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA (fus)
Immobilizer System PATS XCVR certification numbers
Ghana
SPLS / -485 / 2001
Guam (USA)
See USA
Jordan
4/U/U/4250
Kenya
CCK/ES/100/0
Kuwait
M.C/U.S.0 /5/7-12579
Mauritius
TA/2005/15
Mayotte (F)
Mexico
RLVVIVP03-324
Morocco
MR 1299 ANRT 2004
Netherlands Antilles (NL)
Nicaragua
NCG-CE-04-004
Northern Mariana Islands
See USA
Oman
OMA/1265(A) 1308/2001
Puerto Rico
See USA
Qatar
QTEL/SR/2003/R-276
Saudi Arabia
(10/1900)
South Korea
R-LPD1-04-0145
Tunisia
269/MAT/2004
United Arabian Emirates
5/10-2/3274/3774
Uruguay
025/FR/2003
USA
NT8-15607PAT3XCVR
Zambia
CAZ/ENG/CA/2005/02/8
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Your vehicle comes with two coded keys; additional coded keys may be
purchased from your authorized dealer. The authorized dealer can
program your spare keys to your vehicle or you can program the keys
yourself. Refer to Programming spare keys for instructions on how to
program the coded key.
Note: The SecuriLock
威 passive anti-theft system is not compatible with
non-Ford aftermarket remote start systems. Use of these systems may
result in vehicle starting problems and a loss of security protection.
Locks and Security
87
2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA (fus)
Note: Large metallic objects, electronic devices that are used to
purchase gasoline or similar items, or a second coded key on the same
key chain may cause vehicle starting issues. You need to prevent these
objects from touching the coded key while starting the engine. These
objects will not cause damage to the coded key, but may cause a
momentary issue if they are too close to the key when starting the
engine. If a problem occurs, turn the ignition to the off position, remove
all objects on the key chain away from the coded key and restart the
engine.
Note: Do not leave a duplicate coded key in the vehicle. Always
take your keys and lock all doors when leaving the vehicle.
Anti-theft indicator
The anti-theft indicator is the flashing red indicator located on top of the
dash panel to the left of the steering wheel.
• When the ignition is in the off position, the indicator will flash once
every two seconds to indicate the SecuriLock
威 system is functioning
as a theft deterrent.
• When the ignition is in the on position, the indicator will glow for
three seconds to indicate normal system functionality.
If a problem occurs with the SecuriLock
威 system, the indicator will flash
rapidly or glow steadily when the ignition is in the on position. If this
occurs, contact your authorized dealer as soon as possible for service.
Automatic arming
The vehicle is armed immediately after switching the ignition to the off
position.
The theft indicator on the instrument panel will flash every two seconds
when the vehicle is armed.
Automatic disarming
Switching the ignition to the on position with a coded key disarms the
vehicle.
• The theft indicator on the instrument panel will illuminate for three
seconds and then go out.
• If the theft indicator stays on for an extended period of time or
flashes rapidly, contact your authorized dealer as soon as possible.
Locks and Security
88
2010 Crown Victoria (cro)
Owners Guide, 2nd Printing
USA (fus)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст