Ford E-350 (2012 year). Manual — part 14

Function

Number of

bulbs

Trade number

Headlamps
(aerodynamic)

2

H13/9008

Headlamps (sealed
beam)

2

H6054

Park lamp with
aerodynamic

2

3157A or 3157AK

Park lamp with sealed
beam

2

3157K

Side marker with
aerodynamic

2

168

Side marker with
sealed beam

2

194

Back-up lamps

2

3156K or 3156

License plate lamp

1

168

Stop/tail/turn/side
marker lamp

2

3157K

High-mount brake
lamp

2

912

Cargo lamp

1

211-2

Dome lamp (standard)

1

912

Map/reading lamp

2

211-2

All replacement bulbs are clear in color except where noted.

To replace all instrument panel lights - see your authorized dealer

Lights

58

Replacing exterior bulbs

Check the operation of all bulbs frequently.

Replacing headlamp bulbs (aerodynamic)

1. Make sure the headlamp switch is in the off position, then open the
hood.

2. Remove the three screws from
the headlamp assembly and pull the
assembly straight out.

3. Disconnect the electrical
connector by squeezing the release
tab and pushing the connector
forward, then pulling it rearward.

4. Remove the bulb assembly by
turning it counterclockwise and
pulling it straight out.

WARNING: Handle a halogen headlamp bulb carefully and keep
out of children’s reach. Grasp the bulb only by its plastic base

and do not touch the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are operated.

Note: If the bulb is accidentally touched, it should be cleaned with
alcohol before being used.

To install the new bulb, follow the removal procedures in reverse order.

Replacing headlamps (sealed beam)

1. Make sure the headlamp switch is in the off position, then open the
hood.

Lights

59

2. Remove the four screws from the
headlamp assembly and carefully
remove the lamp/bezel.

3. Remove the four screws and the
retaining ring.

4. Disconnect the electrical
connector from the lamp and
remove the lamp.

To install the new lamp, follow the
removal procedures in reverse order.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the off position.

2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs
in this section.

Aerodynamic

Sealed beam

3. Rotate the bulb socket counterclockwise and remove.

4. Carefully pull the bulb straight out of the socket.

To complete installation, follow the removal procedures in reverse order.

Lights

60

Replacing side marker bulbs

1. Make sure the headlamp control is in the off position.

2. Remove the headlamp assembly. Refer to Replacing headlamp bulbs
in this section.

Aerodynamic

Sealed beam

3. Rotate the bulb socket counterclockwise and remove.

4. Carefully pull the bulb straight out of the socket.

To complete installation, follow the removal procedures in reverse order.

Lights

61