Hyundai Coupe (2008 year). Manual — part 6
1 FEATURES OF YOUR HYUNDAI
78
B540D01GK-GAT
When you close the tail gate
!
!
WARNING:
WARNING:
The tail gate should always be kept
Do not close an open tail gate (rear
completely closed while the vehicle
hatch) while a person(s) is sitting
is in motion. If it is left open or ajar,
upright on the rear seat. The tail
poisonous exhaust gases may en-
gate or tail gate glass may contact
ter the car resulting in serious ill-
the head of a person sitting upright
ness or death to the occupants. See
on the rear seat. Closing the tail
additional warnings concerning
gate onto a person's head may
exhaust gases on page 2-2.
cause serious injuries, including
death.
OGK016540
B540C01F-AAT
To Unlock Using the Key
HGK227
OGK046006
To open the tail gate, insert the key
and turn it clockwise to unlock. The tail
gate compartment light illuminates
when the tail gate is opened.
FEATURES OF YOUR HYUNDAI
1
SUN VISOR
79
B580A01GK-GAT
B580C01JM-AAT
NOTE:
Sun Visor Extender (If Installed)
The Supplemental Restraint System
(SRS) label containing useful infor-
mation can be found on the front of
each sun visor.
Vanity mirror
!
WARNING:
Do not place the sun visor in such
a manner that it obscures visibility
of the roadway, traffic or other ob-
HGK2119
jects.
B580C01MC
Your Hyundai is equipped with sun
visors to give the driver and front pas-
Your vehicle is equipped with sun visor
senger either frontal or sideward shade.
extenders that may be used when the
To reduce glare or to shut out direct
visor is in the side glass position.
rays of the sun, turn the sun visor down.
A ticket holder is provided on the back
of the sun visor for the driver. Vanity
mirrors are provided on the back of the
sunvisor for the driver and the front
passenger (If Installed).
1 FEATURES OF YOUR HYUNDAI
STEERING WHEEL TILT
HORN
LUGGAGE NET
80
LEVER
B600A01HP-AAT
B610A01S-GAT
B540D02HP-GAT
(If installed)
(If Installed)
Working Zone
Type A
To adjust the steering wheel:
Type B
OGK046023
HGK2126
Press the pad on the steering wheel to
Some objects can be kept in the net of
sound the horn.
OGK046022
the luggage compartment.
Use the luggage net on the floor or at
1. Pull the lever toward you and hold it
the back of the luggage compartment
to unlock.
to prevent objects from sliding.
2. Raise or lower the steering wheel to
the desired position.
3. After adjustment, release the lever.
!
WARNING:
Do not attempt to adjust the steer-
ing wheel while driving as this may
result in loss of control of the ve-
hicle and serious injury or death.
FEATURES OF YOUR HYUNDAI
1
CRUISE CONTROL
81
B660A02S-GAT
This is designed to function above ap-
(If Installed)
proximately 40 km/h (25 mph).
!
CAUTION:
Type A
To prevent damage to the goods or
the vehicle, care should be taken
!
when carrying fragile or bulky ob-
WARNING:
jects in the luggage compartment.
Pay particular attention during the
down-hill driving with cruise control
system as the vehicle speed can be
increased gradually.
!
WARNING:
Main switch
Avoid eye injury. DO NOT over-
stretch. ALWAYS keep face and
OGK016660
body out of recoil path. DO NOT
Type B
use when strap has visible signs of
wear or damage.
Main switch
OGK018660
The cruise control system provides
automatic speed control for your com-
fort when driving on freeways, tollroads,
or other noncongested highways.
1 FEATURES OF YOUR HYUNDAI
82
B660B01GK-GAT
2. Accelerate to the desired cruising
B660C01GK-GAT
To Set the Cruise Speed
speed above 40 km/h (25 mph).
To Cancel the Cruise Speed
Type A
3. Push the control switch downward
Type A
to "SET (COAST : Type A, − : Type
B)" and release it.
The "SET" indicator light in the in-
strument cluster will illuminate.
4. Remove your foot from the accel-
erator pedal and the desired speed
will automatically be maintained.
5. To increase speed, depress the ac-
celerator pedal enough for the ve-
hicle to exceed the preset speed.
OGK016661
OGK016662
When you remove your foot from
Type B
Type B
the accelerator pedal, the vehicle will
return to the speed you have set.
!
WARNING:
To avoid accidental cruise control
engagement, keep the cruise control
main switch off when not using the
cruise control.
OGK018661
OGK018662
1. Push in the cruise control main switch
To disengage the cruise control sys-
on the end of the barrel. The
tem, pull the control switch toward the
"CRUISE" indicator light in the in-
steering wheel to "CANCEL" position.
strument cluster will be illuminated.
Additionally, the following actions will
This turns the system on.
disengage the system :
FEATURES OF YOUR HYUNDAI
1
83
o
Depress the brake pedal.
B660D01E-GAT
The vehicle will automatically resume
o
Depress the clutch pedal (Manual
To Resume the Preset Speed
the speed set prior to cancellation when
transaxle).
Type A
you push the control switch upward to
o
Shift the selector lever to "N" posi-
"RESUME (ACCEL : Type A, + : Type
tion (Automatic transaxle).
B)" position and release it, providing the
o
Decrease the vehicle speed lower
vehicle speed is above 40 km/h (25
than the memorized speed by 15
mph).
km/h (9 mph).
o
Decrease the vehicle speed to less
than 40 km/h (25 mph).
o
Release the main switch.
OGK016663
B660E01E-AAT
Type B
To Reset at a Faster Speed
1. Push the control switch upward to
"RESUME (ACCEL : Type A, + :
Type B)" position and hold it.
2. Accelerate to desired speed and
release the control switch. While
the control switch is held, the ve-
hicle will gradually gain speed.
OGK018663
1 FEATURES OF YOUR HYUNDAI
84
B660F01GK-AAT
2. When the desired speed is obtained,
To Reset at a Slower Speed
release the control switch. The
!
Type A
"SET" indicator light in the instru-
WARNING:
ment cluster will turn off. While the
o Keep the main switch off when not
control switch is pushed, the vehicle
using the cruise control.
speed will gradually decrease.
o Use the cruise control system
only when traveling on open high-
ways in good weather.
o Do not use the cruise control
when it may not be safe to keep
the car at a constant speed, for
instance, driving in heavy or vary-
ing traffic, or on slippery (rainy,
OGK016661
icy or snow-covered) or winding
Type B
roads or over 6% up-hill or down-
hill roads.
o Pay particular attention to the
driving conditions whenever us-
ing the cruise control system.
o During cruise-control driving with
a manual transaxle vehicle, do not
shift into neutral without depress-
ing the clutch pedal, or the engine
will be overrevved. If this hap-
pens, depress the clutch pedal or
OGK018661
release the main switch.
1. Push the control switch downward to
"SET (COAST : Type A, − : Type B)"
and hold it. The "SET" indicator light
in the instrument cluster will illumi-
nate. The vehicle will decelerate.
FEATURES OF YOUR HYUNDAI
1
AUDIO REMOTE CONTROL
85
SWITCH
B610A01GK-GAT
SEEK UP (
) Switch
o With the cruise control engaged,
(If installed)
when the brake pedal is applied, it
Press the SEEK UP (
) switch 1 sec.
is normal to hear the cruise con-
or more.
trol system deactivate. This is an
indication of normal system op-
1. RADIO mode
eration.
When the SEEK UP (
) switch is
o During normal cruise control
pressed, the unit will automatically tune
operation, when the "SET(COAST
to the next higher frequency.
: Type A, − : Type B)" is activated
or reactivated after applying the
brakes, the cruise control will
2. TAPE mode
energize after approximately 3
Pressing the SEEK UP (
) switch will
seconds. This delay is normal.
OGK046086L
play the beginning of the next music
The steering wheel audio remote con-
segment.
trol switch is installed to promote safe
driving.
3. CD (compact disc)/CDC
(compact disc changer) mode
POWER ON/OFF Switch
Press the SEEK UP (
) switch once
Press the POWER ON/OFF switch to
to skip forward to the beginning of the
select Radio, Tape, CD (compact disc)
next track.
and CDC (compact disc changer).
VOL (
/
) Switch
Press the POWER ON/OFF switch
once again to cancel Radio, Tape, CD
o Press the VOL (
) button to in-
(compact disc) and CDC (compact
crease volume.
disc changer).
o Press the VOL (
) button to de-
cease volume.
1 FEATURES OF YOUR HYUNDAI
HEATING AND AIRCONDITIONING CONTROL
86
B710A02GK-GAT
B710B02O-AAT
Center Ventilator
The center ventilators are located in the
middle of the dashboard. To change the
direction of the air flow, move the knob
in the center of the vent up-and-down
and side-to-side. The vents are opened
when the vent knob is moved to " "
position. The vents are closed when the
vent knob is moved to " ". Keep these
vents clear of any obstructions.
B710C02HP-AAT
Side Ventilator
The side ventilators are located on
each side of the dash board. To change
the direction of the air flow, move the
knob in the center of the vent up-and-
down and side-to-side. The vents are
opened when the vent knob is moved to
"
" position. The vents are closed
when the vent knob is moved to " ".
Keep these vents clear of any obstruc-
tions.
1. Side defrost nozzle
2. Side Ventilator
3. Windshield Defrost ventilator
OGK016003
4. Center Ventilator
FEATURES OF YOUR HYUNDAI
1
HEATING AND VENTILATION
87
B670A02GK-GAT
B670B01A-AAT
B670E02A-AAT
Rotary Type
Fan Speed Control
Temperature Control
(Blower Control)
Cool
Warm
OGK046038L
OGK046043
OGK046045
1. Temperature control switch
This control is used to adjust the degree
2. Air intake control switch
This is used to turn the blower fan on or
of heating or cooling desired.
3. Air flow control switch
off and to select the fan speed.
4. Air Conditioning switch
This blower fan speed, and therefore
5. Fan speed control switch
the volume of air delivered from the
6. Rear window defroster switch
system, may be controlled manually by
setting the blower control between the
"1" and "4" positions.
1 FEATURES OF YOUR HYUNDAI
88
B670C02Y-AAT
B670D01MC-AAT
NOTE:
Air Intake Control
Air Flow Control
It should be noted that prolonged
operation of the heating system in
" " mode will give rise to fogging
of the windshield and side windows
and the air within the passenger com-
partment will become stale. In addi-
tion prolonged use of the air condi-
tioning with the " " mode selected
may result in the air within the pas-
senger compartment becoming ex-
cessively dry.
OGK046044
OGK046039
This is used to select fresh outside air
This is used to direct the flow of air. Air
or recirculation of inside air.
can be directed to the floor, instrument
panel outlets, or windshield. Five sym-
Fresh
bols are used to represent Face, Bi-
Recirculation
Level, Floor, Floor-Defrost and Defrost
air position.
With the "
" mode selected, air
The MAX A/C mode is used to cool the
enters the vehicle from outside and is
inside of the vehicle faster (If installed).
heated or cooled according to the other
functions selected.
With the "
" mode selected, air from
within the passenger compartment is
drawn through the heating system and
heated or cooled according to the other
functions selected.
FEATURES OF YOUR HYUNDAI
1
89
OGK016095
OGK016096
OGK016097
Face-Level
Bi-Level
Floor-Level
Air is discharged through the face vents
Air is discharged through the floor vents,
Selecting the "Face" mode will cause
and the floor vents. This makes it pos-
windshield defroster nozzle, side de-
air to be discharged through the face
sible to have cooler air from the dash-
froster nozzle, side ventilator.
level vents.
board vents and warmer air from the
floor outlets at the same time.
1 FEATURES OF YOUR HYUNDAI
90
OGK016098
OGK016099
OGK016103
MAX
MAX A/C-Level
Floor-Defrost Level
Defrost-Level
A/C
(If Installed)
Air is discharged through the wind-
Air is discharged through the wind-
shield defroster nozzle, the floor vents,
shield defroster nozzle, side defroster
Air is discharged through the face level
side defroster nozzle, side ventilator.
nozzle, side ventilator.
vents.
If the "Floor-Defrost" mode is selected,
If the "Defrost" mode is selected, the A/
If the "MAX A/C" mode is selected, the
the A/C will turn on automatically and
C will turn on automatically and "Fresh"
A/C will turn on automatically and "Re-
"Fresh" mode will be activated.
mode will be activated.
circulation" mode will be activated.
FEATURES OF YOUR HYUNDAI
1
HEATING CONTROLS
BI-LEVEL HEATING
91
B690A02S-AAT
B700A02A-AAT
NOTE:
o The air intake control switch will
change to " " mode when the
ignition switch is turned "ON" with
the MAX A/C mode selected.
o When you change to another mode
from MAX A/C, the A/C and the air
intake control switch are set as
shown in the following chart.
Air Intake
A/C
Control Switch
OGK046038
OGK016700
ON
For normal heating operation, set the air
Your Hyundai is equipped with bi-level
or
*
intake control to the fresh air (
)
heating controls. This makes it pos-
ON or OFF *
position and the air flow control to the
sible to have cooler air from the dash-
ON or OFF *
floor (
) position.
board vents and warmer air from the
floor outlets at the same time. To use
ON
For faster heating, the air intake control
this feature:
ON
switch should be set in the recirculate (
) position.
o Set the air intake control switch to
*
The A/C or the air intake control
the fresh air (
) position.
switch returns to its former setting.
If the windows fog up, set the air flow
o Set the air flow control at the bi-level
control to the defrost (
) position.
(
) position.
(The A/C will turn on automatically and
o Adjust the fan speed control to the
"Fresh" mode will be activated.)
desired speed.
o Set the temperature control between
For maximum heat, move the tempera-
"Cool" and "Warm".
ture control to "Warm".
1 FEATURES OF YOUR HYUNDAI
VENTILATION
DEFROSTING/DEFOGGING
92
B710A01A-AAT
B720A02FC-GAT
OGK016703
OGK016701
OGK016702
To remove frost or exterior fog
Use the heating/ventilation system to
To operate the ventilation system:
on the windshield:
defrost or defog the windshield:
o Set the air intake control switch at
o Set the air flow control to the defrost
the fresh air (
) position.
To remove interior fog on the
(
) position. (The A/C will turn on
o To direct all intake air to the dash-
windshield:
automatically and "Fresh" mode will
board vents, set the airflow control to
be activated.)
o Set the air flow control to the defrost
the face (
) position.
o Set the temperature control to warm.
(
) position. (The A/C will turn on
o Adjust the fan speed control to the
o Set the fan speed control to position
automatically and "Fresh" mode will
desired speed.
"3" or "4".
be activated.)
o Set the temperature control between
o Set the temperature control to the
"Cool" and "Warm".
desired position.
o Set the fan speed control between
"1" and "4" position.
FEATURES OF YOUR HYUNDAI
1
AIR CONDITIONING SYSTEM
93
B730A01L-AAT
B740A01S-AAT
NOTE:
Operation Tips
(If installed)
When the A/C is operated continu-
Air Conditioning Switch
ously on the floor-defrost level (
)
o
To keep dust or unpleasant fumes
or defrost level (
), it may cause fog
from entering the car through the
to form on the exterior windshield. If
ventilation system, temporarily set
this occurs, set the air flow control to
the air intake control to "Recircula-
the face level position (
) and fan
tion". Be sure to return the control to
speed control to the low position.
"Fresh" when the irritation has
passed to keep fresh air in the ve-
hicle. This will help keep the driver
alert and comfortable.
o
Air for the heating/cooling system is
drawn in through the grilles just ahead
of the windshield. Care should be
OGK046047
taken that these are not blocked by
The air conditioning is turned on or off
leaves, snow, ice or other obstruc-
by pushing the A/C button on the heat-
tions.
ing/air conditioning control panel.
o
To prevent interior fog on the wind-
shield, set the air intake control to
the fresh air (
) position, turn on
the air conditioning system, and ad-
just temperature control to desired
temperature fan speed to the desired
position.
1 FEATURES OF YOUR HYUNDAI
94
B740B02A-AAT
o Adjust the fan control to the desired
B740C01A-AAT
Air Conditioning Operation
speed. For greater cooling, turn the
De-Humidified Heating
Cooling
fan control to one of the higher speeds
or temporarily select the recirculate
(
) position on the air intake control
switch.
OGK016705
OGK016704
For dehumidified heating:
To use the air conditioning to cool the
interior:
o Turn on the fan control switch.
o Turn on the air conditioning switch.
o Turn on the fan control switch.
The air conditioning indicator light
o Turn on the air conditioning switch by
should come on at the same time.
pushing in on the switch. The air
o Set the air intake control switch to
conditioning indicator light should
the fresh air (
) position.
come on at the same time.
o Set the air flow control to the face
o Set the air intake control switch to
(
) position.
the fresh air (
) position.
o Adjust the fan control to the desired
o Set the temperature control to "Cool".
speed.
("Cool" provides maximum cooling.
o For more rapid action, set the fan at
The temperature may be moderated
one of the higher speeds.
by moving the control toward
o Adjust the temperature control to
"Warm".)
provide the desired amount of
warmth.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст