Hyundai Azera (2017 year). Manual — part 8
Features of your vehicle
NVS® is a registered trademark and
Side view mirrors
Z-Nav™ is a trademark of the Gentex
CAUTION - Rearview
Be sure to adjust mirror angles
mirror
Corporation, Zeeland, Michigan.
before driving.
HomeLink® is a registered trademark
Do not scrape ice off the mirror
Your vehicle is equipped with both
owned by Johnson Controls,
face; this may damage the sur-
left-hand and right-hand side view
Incorporated, Milwaukee, Wisconsin.
face of the glass. If ice should
mirrors. The mirrors can be adjusted
restrict movement of the mirror,
remotely with the remote switch. The
do not force the mirror for
mirror heads can be folded back to
adjustment. To remove ice, use
prevent damage during an automatic
a deicer spray, or a sponge or
car wash or when passing through a
soft cloth with very warm water.
narrow street.
The right side view mirrors is convex.
Objects seen in the mirror are closer
than they appear.
WARNING - Mirror
adjustment
Use your interior rearview mirror or
direct observation to determine the
Do not adjust or fold the side
actual distance of following vehicles
view mirrors while the vehicle is
when changing lanes.
moving. This could result in
loss of control, and an accident
which could cause death, seri-
ous injury or property damage.
4 54
Features of your vehicle
WARNING
•
Always check the road condi-
tion while driving for unex-
pected situations
even
though the vehicle is
equipped with a blind spot
mirror.
•
The blind spot mirror is a
device made for convenience.
OHG044300A
Do not solely rely on the mir-
ror but always pay attention to
OHG040044
drive safely.
Adjusting the side view mirror
The electric remote control mirror
switch allows you to adjust the posi-
tion of the left and right side view mir-
rors.
To adjust the position of the mirrors:
1. Place the ignition switch in the
ACC position.
OFS053068
2. Move the lever(1) to R (right) or L
Blind spot mirror (if equipped)
(left) to select the right side mirror
The blind spot mirror (BSM) is sup-
or the left side mirror.
plemental mirror to help reduce a dri-
3. Press a corresponding point on
ver's blind spot that will show the rear
the mirror adjustment control to
side territory of your vehicle. The
position the selected mirror up,
blind spot mirror is equipped with the
down, left or right.
left-hand side view mirror.
4 55
Features of your vehicle
4. After the adjustment, position the
lever in the center to prevent inad-
vertent movement.
CAUTION - Outside
mirror
•
The mirrors stop moving when
they reach the maximum
adjusting angles, but the
motor continues to operate
while the switch is pressed.
OHG041214A
OHG040045
Do not press the switch longer
than necessary, the motor
Folding/unfolding the side view
Electric type (if equipped)
may be damaged.
mirror
The side view mirror can be folded or
•
Do not attempt to adjust the
Manual type
unfolded by pressing the switch as
side view mirror by hand.
To fold the side view mirror, grasp the
below.
Doing so may damage the
housing of the mirror and then fold it
Left (1) : The mirror will unfold.
related parts.
toward the rear of the vehicle.
Right (2) : The mirror will fold.
Center (AUTO, 3) :
The mirror will fold or unfold automat-
ically as follows:
- The mirror will fold or unfold when
the door is locked or unlocked by the
smart key.
- The mirror will fold or unfold when
the door is locked or unlocked by the
button on the outside door handle.
4 56
Features of your vehicle
- The mirror will unfold when you
Neutral : When the remote control
approach the vehicle
(all doors
side view mirror switch is
closed and locked) with a smart
placed in the middle, the
key in possession. (if equipped)
side view mirrors will not
operate while the vehicle is
moving rearward.
CAUTION
The electric type side view mir-
The side view mirrors will automati-
ror operates even though the
cally revert to their original positions
ENGINE START/ STOP button is
under the following conditions:
in the OFF position. However, to
1. The ignition switch is in the OFF
prevent unnecessary battery
OHG041034A
position.
discharge, do not adjust the
2. Shift lever is moved to any position
mirrors longer than necessary
Reverse parking aid function
except R (Reverse).
while the engine is not running.
(if equipped)
3. Remote control side view mirror
While the vehicle is moving rear-
switch is placed in the middle.
ward, the side view mirror(s) will
CAUTION
move downward to aid reverse park-
In case it is an electric type side
ing. According to the position of the
view mirror, don’t fold it by
side view mirror switch (1), the side
hand. It could cause motor fail-
view mirror(s) will operate as follows:
ure.
L/R : When the remote control side
view mirror switch is selected to
the L (left) or R (right) position,
both side view mirrors will move
downward.
4 57
Features of your vehicle
INSTRUMENT CLUSTER
■ Type A
1. Tachometer
2. Turn signal indicators
3. Speedometer
4. LCD display
5. Fuel gauge
■ Type B
6. Engine coolant temperature gauge
7. Warning and indicator lights
For more details, refer to "Gauges" in
the next pages.
The actual cluster in the vehicle may differ from the illustration.
OHG046046N/OHG045047N
4 58
Features of your vehicle
■ Type A
■ Type A
OHG040049N
OHG040051
■ Type B
■ Type B
OHG045048
Instrument panel illumination
The instrument panel illumination
intensity can be adjusted as follows:
• Ignition switch in the ON position
• Pushing the control switch up or
down
The illumination intensity is shown
OHG040050N
OHG040052
on the instrument cluster LCD dis-
Gauges
Tachometer
play.
Speedometer
The tachometer indicates the engine
speed in revolutions per minute
The speedometer indicates the vehi-
(rpm).
cle speed.
Use the tachometer to select the cor-
The speedometer is calibrated in
rect shift points and to prevent lug-
miles per hour and/or kilometers per
ging and/or over-revving the engine.
hour.
4 59
Features of your vehicle
■ Type A
■ Type B
■ Type A
■ Type B
CAUTION - Red zone
Do not operate the engine with-
in the tachometer's RED ZONE.
This may cause severe engine
damage.
OHG040053
OHG043054A
Engine coolant temperature
Fuel gauge
gauge
The fuel gauge indicates the approx-
This gauge shows the temperature
imate amount of fuel remaining in the
of the engine coolant when the igni-
fuel tank.
tion switch is ON.
• The fuel tank capacity is given in sec-
Do not continue driving with an over-
tion 12.
heated engine. If your vehicle over-
• The fuel gauge is supplemented by
heats, refer to “If the engine over-
a low fuel warning light, which will
heats” in section 6.
illuminate when the fuel tank is
If the segment level moves beyond
nearly empty.
the normal range area toward the “H”
• On inclines or curves, the fuel
position, it indicates overheating that
gauge segment level may fluctuate
may damage the engine.
or the low fuel warning light may
come on earlier than usual due to
the movement of fuel in the tank.
4 60
Features of your vehicle
■ Type A
■ Type B
■ Type A
■ Type B
WARNING - Fuel gauge
Stop and obtain additional fuel
as soon as possible after the
warning light comes on or when
the gauge level comes close to
the E level. Running out of fuel
can expose vehicle occupants
to danger.
OHG045311
OHG045312N
CAUTION - Low fuel
Avoid driving with a extremely
Transaxle Shift Indicator
Odometer
low fuel level. Running out of
Automatic Transaxle Shift Indicator
The odometer indicates the total dis-
fuel could cause the engine to
This indicator displays which auto-
tance that the vehicle has been driv-
misfire, damaging the catalytic
matic transaxle shift lever is selected.
en and should be used to determine
converter.
when periodic maintenance should
be performed.
• Park : P
• Reverse : R
• Neutral : N
• Drive : D
• Sports Mode : 1, 2, 3, 4, 5, 6
4 61
Features of your vehicle
OHG045055
LCD display control
The LCD display modes can be
changed by using the control buttons.
(1)
: MODE button for changing
modes
(2)
▼ :MOVE switch for changing
items
(3) OK : SELECT/RESET button for
setting or resetting the
selected item
For the LCD modes, refer to “LCD
Display” in this chapter.
4 62
Features of your vehicle
LCD DISPLAY
LCD modes
Modes
Symbol
Explanation
This mode displays driving information like the tripmeter, fuel economy, and so on.
Trip Computer
For more details, refer to "Trip Computer" in this chapter.
Turn By Turn (TBT)
This mode displays the state of the navigation.
(if equipped)
This mode displays the state of the Lane Departure Warning System
LDWS
(LDWS).
(if equipped)
For more details, refer to "Lane Departure Warning System (LDWS)"
in chapter 5.
A/V
This mode displays the state of the A/V system.
(If equipped)
This mode informs of the service interval (mileage or days) and
Information
or
warning messages related to the Blind Spot Detection system, and so on.
User Settings
On this mode, you can change settings of the doors, lamps, and so on.
For controlling the LCD modes, refer to "LCD Display Control" in this chapter.
4 63
Features of your vehicle
■ Type A
■ Type B
■ Type A
■ Type B
■ Type A
■ Type B
OHG045323L
OHG045324N
OHG045226N
Cannot edit settings while driving
Quick guide (Help, if equipped)
Trip computer mode
This warning message illuminates if
If you press and hold the OK button
This mode displays driving informa-
you try to select the other User
in the User Settings Mode, explana-
tion like the tripmeter, fuel economy,
Settings item when driving.
tion about the selected item is dis-
and so on.
For safety, change the User Settings
played in the cluster.
after parking the vehicle, applying
For more details, refer to “Trip
the parking brake and moving the
Computer” in this chapter.
shift lever to P (Park) position.
4 64
Features of your vehicle
OHG045257
OHG055159N
OHG045238N
Turn By Turn (TBT) mode
LDWS Mode (if equipped)
A/V mode
(if equipped)
This mode displays the state of the
This mode displays the state of the
This mode displays the state of the
Lane Departure Warning System
A/V system.
navigation.
(LDWS).
For more information, refer to "Lane
Departure Warning System (LDWS)"
in chapter 5.
4 65
Features of your vehicle
■ Type A
■ Type B
■ Type A
■ Type B
■ Type A
■ Type B
OHG045258N
OHG045326N
OHG045327N
Information mode
Service required
Service in OFF
Service interval
If you do not have your vehicle serv-
If the service interval is not set,
iced according to the already
"Service in OFF" message is dis-
Service in
inputted service interval, "Service
played on the LCD display.
It calculates and displays when you
required" message is displayed for
need a scheduled maintenance
several seconds each time you set
✽ NOTICE
service (mileage or days).
the Engine Start/Stop button to the
If any of the following conditions
If the remaining mileage or time
ON position.
reaches 900 miles (1,500 km) or 30
occurs, the mileage and days may be
To reset the service interval to the
incorrect.
days, "Service in" message is dis-
mileage and days you inputted
played for several seconds each time
- The battery cable is disconnected.
before:
- The fuse switch is turned off.
you set the Engine Start/Stop button
- Press the OK button for more than
- The battery is discharged.
to the ON position.
1 second.
For the setting of the service inter-
val, refer to "User Settings Mode"
of the LCD display.
4 66
Features of your vehicle
OHG045534N
Warning Message
If one of followings occurs, warning
messages will be displayed on the
information mode for several sec-
onds.
- Malfunction of below systems
• Blind Spot Detection (BSD)
• Forward Collision Warning
System (FCWS)
• Tire Pressure Monitoring System
(TPMS), and so on.
- Low washer fluid, etc.
4 67
Features of your vehicle
User settings mode
On this mode, you can change setting of the instrument cluster, doors, lamps, and so on.
Driving Assist (if equipped)
Items
Explanation
• Off: The FCW system will be deactivated.
FCWS
• Late/Normal/Early: The warning point of time may be adjusted.
(Forward Collision Warning
System)
For more details, refer to "Forward Collision Warning System (FCWS)" in chapter 5.
To activate or deactivate the RCTA system.
RCTA
(Rear Cross Traffic Alert)
For more details, refer to "Rear Cross Traffic Alert (RCTA)" in chapter 5.
4 68
Features of your vehicle
Door/Trunk
Items
Explanation
•
Off (Disable) : The auto door lock operation will be deactivated.
•
Enable on Speed: All doors will be automatically locked when the vehicle speed exceeds 9.3mph
(15km/h).
Automatically Lock
•
Enable on Shift: All doors will be automatically locked if the automatic transaxle shift lever is shift-
ed from the P (Park) position to the R (Reverse), N (Neutral), or D (Drive) posi-
tion.
•
Off (Disable) : The auto door unlock operation will be deactivated.
•
Vehicle Off: All doors will be automatically unlocked when the Engine Start/Stop button is set to
the OFF position.
Automatically Unlock
•
Driver Door Unlock: All doors will be automatically unlocked if the driver's door is unlocked.
•
On Shift to P: All doors will be automatically unlocked if the automatic transaxle shift lever is shift-
ed to the P (Park) position.
• OFF : The two press unlock function will be deactivated. Therefore, all doors will unlock if the door
is unlocked.
Two Press Unlock
• ON : The driver’s door will unlock if the door is unlocked. When the door is unlocked again within
4 seconds, all doors will unlock.
Door Lock Sound
To activate or deactivate the lock sound when locking doors.
(Lock/Unlock Sound)
To activate or deactivate the Smart Trunk system.
Smart Trunk
For more details, refer to "Smart Trunk" in this chapter.
4 69
Features of your vehicle
Lights/Sound
Items
Explanation
• Off: The one touch turn signal function will be deactivated.
• 3, 5, 7 Flashes : The lane change signals will blink 3, 5, or 7 times when the turn signal lever is
One Touch Turn Signal
moved slightly.
For more details, refer to “Light” in this chapter.
• Off : The ambient light of interior will turn off.
Ambient Light
• 1, 2, 3, 4 Level : The brightness of the ambient light may be adjusted.
For more details, refer to “Light” in this chapter.
• On: The head lamp delay function will be activated.
Head Lamp Delay
• Off: The headlamp delay function will be deactivated.
For more details, refer to “Light” in this chapter.
BSD (Blind Spot Detection)
• Off : The BSD sound function will be deactivated.
Sound
• On : The BSD sound function will be activated.
• Off : The welcome sound function will be deactivated.
Welcome Sound
• On : The welcome sound function will be activated.
4 70
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст