Hyundai Genesis Coupe (2016 year). Manual — part 9
Features of your vehicle
Low washer fluid level
Malfunction indicator
warning light
light (MIL) (check engine
CAUTION
(if equipped)
light)
•
Prolonged driving with the
Malfunction Indicator Light
This warning light indicates the
This indicator light is part of the
illuminated may cause dam-
washer fluid reservoir is near empty.
Engine Control System which moni-
age to the emission control
Refill the washer fluid as soon as
tors various emission control system
systems which could effect
possible.
components. If this light illuminates
drivability and/or fuel econo-
while driving, it indicates that a
my.
potential malfunction has been
•
If the Malfunction Indicator
detected somewhere in the emission
Light illuminates, potential cat-
control system.
alytic converter damage is pos-
This light will also illuminate when
sible which could result in loss
the ignition switch is turned to the
of engine power. Have the
ON position, and will go out in a few
Engine Control System inspect-
seconds after the engine is started. If
ed as soon as possible by an
it illuminates while driving, or does
authorized HYUNDAI dealer.
not illuminate when the ignition
switch is turned to the ON position,
take your vehicle to your nearest
authorized HYUNDAI dealer and
have the system checked.
Generally, your vehicle will continue
to be drivable, but have the system
checked by an authorized HYUNDAI
dealer promptly.
4 68
Features of your vehicle
ESC indicator
ESC OFF indicator
Cruise indicator (if equipped)
(Electronic Stability
Control)
CRUISE indicator
The ESC indicator will illuminate
The ESC OFF indicator will illumi-
CRUISE
when the ignition switch is turned
nate when the ignition switch is
ON, but should go off after approxi-
turned ON, but should go off after
The indicator light illuminates when
mately 3 seconds. When the ESC is
approximately 3 seconds. To switch
the cruise control system is enabled.
on, it monitors the driving conditions.
to ESC OFF mode, press the ESC
Under normal driving conditions, the
OFF button
. The ESC OFF indica-
The cruise indicator light in the
instrument cluster is illuminated
ESC light will remain off. When a
tor
will illuminate indicating the
slippery or low traction condition is
when the cruise control ON-OFF but-
ESC is deactivated.
ton on the steering wheel is pushed.
encountered, the ESC will operate,
With the ESC system in the stand by
and the ESC indicator will blink to
The indicator light turns off when the
position, if you use the parking brake
indicate the ESC is operating.
cruise control ON-OFF button is
to stop the vehicle due abnormal
pushed again. For more information
The ESC indicator stays on when the
brake operation, the ESC system
ESC may have a malfunction. Take
about the use of cruise control, refer to
may be stopped and ESC OFF indi-
“Cruise control system” in section 5.
your car to an authorized HYUNDAI
cator
may illuminate for about 5
dealer and have the system
minutes.
checked.
CAUTION
Do not use the parking brake to
stop the vehicle, except in an
emergency situation.
4 69
Features of your vehicle
Cruise SET indicator
Key reminder warning chime
KEY OUT indicator
KEY
SET
(if equipped)
Without smart key
OUT
If the driver’s door is opened while
the ignition key is left in the ignition
When the ignition switch is in the
The indicator light illuminates when
switch (ACC or LOCK position), the
ACC or ON position, if any door is
the cruise function switch (SET- or
key reminder warning chime will
open, the system checks for the
RES+) is ON.
sound. This is to prevent you from
smart key. If the smart key is not in
The cruise SET indicator light in the
locking your keys in the vehicle. The
the vehicle, the indicator will blink,
instrument cluster is illuminated
chime sounds until the key is
and if all doors are closed, the chime
when the cruise control switch (SET-
removed from the ignition switch or
will also sound for about 5 seconds.
or RES+) is pushed. The cruise SET
the driver’s door is closed.
The indicator will turn off while the
indicator light does not illuminate
vehicle is moving. Keep the smart
when the cruise control switch (CAN-
key in the vehicle.
CEL) is pushed or the system is dis-
With smart key
engaged.
If the driver’s door is opened while
the smart key is in the vehicle with
the engine start/stop button in ACC
or the smart key is in the smart key
holder with the engine start/stop but-
ton in OFF, the key reminder warning
chime will sound.
The chime sounds until the smart
key is removed from the smart key
holder or the driver’s door is closed.
4 70
Features of your vehicle
MULTI GAUGE
Multi gauge consists of an Instant
fuel consumption gauge, engine
torque gauge and engine oil temper-
ature gauge.
1. Instant fuel consumption
3. Engine torque gauge
2. Turbo boost pressure gauge
4. Engine oil temperature gauge
OBK042246N
4 71
Features of your vehicle
OBK042247N
OBK042249N
OBK042250N
Instant fuel consumption
Engine torque gauge
Engine oil temperature gauge
It shows instantaneous change of
It shows instantaneous change of
It shows instantaneous change of
the fuel consumption.
the Torque by rpm.
the Engine oil temperature.
✽ NOTICE
You must drive more than 6 mph
(10 km/h) for this gauge to display
the instant fuel consumption.
4 72
Features of your vehicle
REAR PARKING ASSIST SYSTEM (IF EQUIPPED)
Operation of the rear parking
WARNING
assist system
The rear parking assist system
Operating condition
is a supplementary function
• This system will activate when back-
only. The operation of the rear
ing up with the ignition switch ON.
parking assist system can be
affected by several factors
If the vehicle is moving at a speed
(including environmental condi-
over
6.2 mph (10 km/h), the sys-
tions). It is the responsibility of
tem may not be activated correctly.
the driver to always check the
• The sensing distance while the
area behind the vehicle before
rear parking assist system is in
Sensors
OBK042131
and while backing up.
operation is approximately 47 in.
(120 cm).
The rear parking assist system
assists the driver during backward
• When more than two objects are
movement of the vehicle by chiming
sensed at the same time, the clos-
if any object is sensed within a dis-
est one will be recognized first.
tance of 47 in. (120 cm) behind the
vehicle. This system is a supplemen-
Types of warning sound
tal system and it is not intended to
nor does it replace the need for
• When an object is 47 in. to 24 in.
extreme care and attention of the
(120 cm to 60 cm) from the rear
driver. The sensing range and
bumper: Buzzer beeps intermit-
objects detectable by the back sen-
tently.
sors are limited. Whenever backing-
• When an object is 24 in. to 12 in.
up, pay as much attention to what is
(60 cm to 30 cm) from the rear
behind you as you would in a vehicle
bumper: Buzzer beeps more fre-
without a rear parking assist system.
quently.
• When an object is within 12 in.
(30 cm) of the rear bumper:
Buzzer sounds continuously.
4 73
Features of your vehicle
Non-operational conditions of
The detecting range may decrease
Rear parking assist system
rear parking assist system
when:
precautions
1. The sensor is stained with foreign
The rear parking assist system
•
The rear parking assist system
may not operate properly when:
matter such as snow or water.
may not sound sequentially
(The sensing range will return to
depending on the speed and
1. Moisture is frozen to the sensor. (It
normal when removed.)
shapes of the objects detected.
will operate normally when the
2. Outside air temperature is
moisture has been cleared.)
•
The rear parking assist system
extremely hot or cold.
may malfunction if the vehicle
2. The sensor is covered with foreign
bumper height or sensor installa-
matter, such as snow or water, or
The following objects may not be
tion has been modified or dam-
the sensor cover is blocked. (It will
recognized by the sensor:
aged. Any non-factory installed
operate normally when the materi-
equipment or accessories may
al is removed or the sensor is no
1. Sharp or slim objects such as
also interfere with the sensor per-
longer blocked.)
ropes, chains or small poles.
formance.
3. Driving on uneven road surfaces
2. Objects which tend to absorb the
•
The sensor may not recognize
(unpaved roads, gravel, bumps,
sensor frequency such as clothes,
objects less than 15 in. (40 cm)
gradient).
spongy material or snow.
from the sensor, or it may sense an
4. Objects generating excessive
3. Undetectable objects smaller than
incorrect distance. Use caution.
noise (vehicle horns, loud motor-
40 in. (1 m) in height and narrower
•
When the sensor is frozen or
cycle engines, or truck air brakes)
than 6 in. (14 cm) in diameter.
stained with snow, dirt, or water,
are within range of the sensor.
the sensor may be inoperative until
5. Heavy rain or water spray exists.
the stains are removed using a soft
6. Wireless transmitters or mobile
cloth.
phones are within range of the
•
Do not push, scratch or strike the
sensor.
sensor. Sensor damage could
7. The sensor is covered with snow.
occur.
4 74
Features of your vehicle
✽ NOTICE
Self-diagnosis
WARNING
This system can only sense objects
If you don’t hear an audible warning
within the range and location of the
Pay close attention when the
sound or if the buzzer sounds inter-
sensors; It can not detect objects in
vehicle is driven close to
mittently when shifting the gear to the
other areas where sensors are not
objects on the road, particularly
R (Reverse) position, this may indi-
installed. Also, small or slim objects,
pedestrians, and especially
cate a malfunction in the rear parking
such as poles or objects located
children. Be aware that some
assist system. If this occurs, have
between sensors may not be detected
objects may not be detected by
your vehicle checked by an author-
by the sensors.
the sensors, due to the object’s
ized HYUNDAI dealer as soon as
Always visually check behind the
distance, size or material, all of
possible.
vehicle when backing up.
which can limit the effective-
Be sure to inform any drivers of the
ness of the sensor. Always per-
vehicle that may be unfamiliar with
form a visual inspection to
WARNING
the system regarding the systems
make sure the vehicle is clear of
Your new vehicle warranty does
capabilities and limitations.
all obstructions before moving
not cover any accidents or dam-
the vehicle in any direction.
age to the vehicle or injuries to
its occupants due to a rear
parking assist system malfunc-
tion. Always drive safely and
cautiously.
4 75
Features of your vehicle
PARKING ASSIST SYSTEM (IF EQUIPPED)
■ Type A
The sensing range and objects
detectable by the sensors are limit-
ed. Whenever moving pay as much
attention to what is in front and
behind of you as you would in a vehi-
cle without a parking assist system.
The front parking assist system has
2 sensors on the front bumper. These
2 sensors can detect right and left
Sensor
side area. It means the front parking
OBK042226
assist system can not detect the cen-
■ Type B
ter area of the front bumper.
OBK042227
Operation of the parking
WARNING
assist system
The parking assist system
Operating condition
should only be considered as a
• This system activates when the
supplementary function. The
parking assist button is pressed
driver must check the front and
with the ignition switch ON.
rear view. The operational func-
tion of the parking assist system
Sensor
OBK042131
can be affected by many factors
The parking assist system assists the
and conditions of the surround-
driver during movement of the vehicle
ings, so the responsibility rests
by chiming if any object is sensed
always with the driver.
within the distance of 24 in. (60 cm) in
front and 47 in. (120 cm) behind the
vehicle. This system is a supplemental
system and it is not intended to nor
does it replace the need for extreme
care and attention of the driver.
4
76
Features of your vehicle
•
The parking assist button turns on
Type of warning indicator and sound
automatically and activates the
: with Warning sound
parking assist system when you
: without Warning sound
shift the gear to the R (Reverse)
position. It will turn off automatical-
Warning indicator
ly when you shift out of R
Distance from object
Warning sound
(Reverse) and drive above 6.2 mph
When driving
When driving
forward
rearward
(10 km/h).
•
The sensing distance while back-
Front
-
-
-
ing up is approximately 47 in. (120
47 in.~24 in.
cm) when you are driving less than
(120 cm~60 cm)
Buzzer beeps
6.2 mph (10 km/h).
Rear
-
intermittently
•
The sensing distance while moving
forward is approximately 24 in. (60
Front
-
cm) when you are driving less than
24 in.~12 in.
(60 cm~30 cm)
6.2 mph (10 km/h).
Buzzer beeps
Rear
-
frequently
•
When more than two objects are
sensed at the same time, the clos-
Buzzer sounds
Front
est one will be recognized first.
continuously
12 in.
(30 cm)
Buzzer sounds
Rear
-
✽ NOTICE
continuously
It may not operate if it’s distance
from the object is already less than
✽ NOTICE
approximately 9.8 in (25 cm) when
• The actual warning sound and indicator may differ from the illustration
the system is ON.
according to objects or sensor status.
• Do not wash the vehicle's sensor with high pressure water.
4 77
Features of your vehicle
Non-operational conditions of
There is a possibility of parking
CAUTION
parking assist system
assist system malfunction when:
•
This system can only sense
Parking assist system may not
1. Driving on uneven road surfaces
objects within the range and
such as unpaved roads, gravel,
operate normally when:
location of the sensors;
bumps, or gradient.
1. Moisture is frozen to the sensor. (It
It can not detect objects in
2. Objects generating excessive noise
will operate normally when mois-
other areas where sensors are
such as vehicle horns, loud motor-
ture melts.)
not installed. Also, small or
cycle engines, or truck air brakes
slim objects, such as poles or
2. Sensor is covered with foreign
can interfere with the sensor.
objects located between sen-
matter, such as snow or water, or
3. Heavy rain or water spray.
sors may not be detected by
the sensor cover is blocked. (It will
operate normally when the materi-
4. Wireless transmitters or mobile
the sensors.
al is removed or the sensor is no
phones present near the sensor.
Always visually check behind
longer blocked.)
5. Sensor is covered with snow.
the vehicle when backing up.
3. Sensor is stained with foreign mat-
•
Be sure to inform any drivers
ter such as snow or water.
of the vehicle that may be
(Sensing range will return to nor-
unfamiliar with the system
mal when removed.)
regarding the systems capa-
bilities and limitations.
4.The parking assist button is off.
4 78
Features of your vehicle
Detecting range may decrease
✽ NOTICE
✽ NOTICE
when:
1. The warning may not sound
This system can only sense objects
1. Outside air temperature is
sequentially depending on the
within the range and location of the
extremely hot or cold.
speed and shapes of the objects
sensors, it can not detect objects in
2. Undetectable objects smaller than
detected.
other areas where sensors are not
80 in. (1 m) and narrower than 6 in.
2. The parking assist system may
installed. Also, small or slim objects,
(14 cm) in diameter.
malfunction if the vehicle bumper
or objects located between sensors
height or sensor installation has
may not be detected.
been modified. Any non-factory
Always visually check in front and
The following objects may not be
installed equipment or accessories
behind the vehicle when driving.
recognized by the sensor:
may also interfere with the sensor
Be sure to inform any drivers in the
1. Sharp or slim objects such as
performance.
vehicle that may be unfamiliar with
ropes, chains or small poles.
3. Sensor may not recognize objects
the system regarding the systems
2. Objects, which tend to absorb sen-
less than 12 in. (30 cm) from the
capabilities and limitations.
sor frequency such as clothes,
sensor, or it may sense an incor-
spongy material or snow.
rect distance. Use with caution.
WARNING
4. When the sensor is frozen or
Pay close attention when the
stained with snow or water, the
vehicle is driven close to objects
sensor may be inoperative until
on the road, particularly pedestri-
the stains are removed using a
ans, and especially children. Be
soft cloth.
aware that some objects may not
5. Do not push, scratch or strike the
be detected by the sensors, due
sensor with any hard objects that
to the objects distance, size or
could damage the surface of the
material, all of which can limit the
sensor. Sensor damage could
effectiveness of the sensor.
occur.
Always perform a visual inspec-
tion to make sure the vehicle is
clear of all obstructions before
moving the vehicle in any direc-
tion.
4
79
Features of your vehicle
REAR CAMERA DISPLAY (IF EQUIPPED)
Self-diagnosis
This system is a supplemental sys-
tem that helps the driver by display-
When you shift the gear to the R
ing objects behind the vehicle when
(Reverse) position and if one or more
backing up.
of the below occurs you may have a
malfunction in the rear parking assist
Always keep the camera lens clean. If
system.
lens is covered with foreign matter,
the camera may not operate normally.
• You don't hear an audible warning
sound or if the buzzer sounds inter-
mittently.
WARNING
OBK044277
- Rear camera display
•
is displayed. (if equipped)
The rear camera display is not a
(blinks)
safety device. It only serves to
assist the driver in identifying
If this occurs, have your vehicle
objects directly behind the mid-
checked by an authorized HYUNDAI
dle of the vehicle. The camera
dealer as soon as possible.
does NOT cover the complete
area behind the vehicle. While
the camera's display is general-
WARNING
ly accurate, objects can be
much closer than they appear in
Your new vehicle warranty does
OBK044278
the display screen and can be
not cover any accidents or dam-
The rear camera display will activate
distorted in both size and pro-
age to the vehicle or injuries to
when the back-up light is ON with the
portion.
its occupants related to a park-
ignition switch ON and the shift lever
ing assist system. Always drive
in the R (Reverse) position.
safely and cautiously.
4 80
Features of your vehicle
HAZARD WARNING FLASHER
WARNING - Relying on
the Rear-Camera Display
Never rely solely on the rear
camera display when backing
up. You must always use meth-
ods of viewing the area behind
you including looking over both
shoulders as well as continu-
ously checking all three rear
view mirrors. Due to the difficul-
ty of ensuring that the area
OBK044044N
behind you remains clear,
The hazard warning flasher should
always back slowly and stop
be used whenever you find it neces-
immediately if you even suspect
sary to stop the car in a hazardous
that a person, and especially a
location. When you must make such
child, might be behind you.
an emergency stop, always pull off
the road as far as possible.
The hazard warning lights are turned
on by pushing in the hazard switch.
This causes all turn signal lights to
blink. The hazard warning lights will
operate even though the key is not in
the ignition switch.
To turn the hazard warning lights off,
push the switch a second time.
4 81
Features of your vehicle
LIGHTING
Battery saver function
Headlight escort function
Headlamp welcome function
(if equipped)
(if equipped)
•
The purpose of this feature is to
prevent the battery from being dis-
If you turn the ignition switch to the
When the headlight switch is in the
charged. The system automatically
ACC or OFF position with the head-
ON or AUTO position and all doors
turns off the exterior lights when
lights ON, the headlights (and/or tail
(and trunk) are closed and locked, if
the driver removes the ignition key
lights) remain on for about 5 minutes.
you press the door unlock button on
(smart key : turns off the engine)
However, if the driver’s door is
the transmitter (or the smart key), the
and opens the driver-side door. (in
opened and closed, the headlights
parking light will come on for about
that order)
are turned off after 15 seconds.
15 seconds. At this time, if you press
the door lock button on the transmit-
•
With this feature, the parking lights
The headlights can be turned off by
ter
(or smart key) the parking light
will be turned off automatically if
pressing the lock button on the trans-
will turn off immediately.
the driver parks on the side of road
mitter (or smart key) twice or turning
at night.
the light switch to the OFF or Auto
position.
If necessary, to keep the lights on
when the ignition key is removed
However, if you turn the light switch to
(smart key : turns off the engine),
the Auto position when it is dark outside,
perform the following:
the headlights will not be turned off.
1) Open the driver-side door.
CAUTION
2) Turn the parking lights OFF and
ON again using the light switch
If the driver gets out of the vehi-
on the steering column.
cle through other doors (except
driver’s door), the battery saver
function does not operate and
the headlight escort function
does not turn off automatically.
Therefore, it causes the battery
to be discharged. In this case,
make sure to turn off the lamp
before getting out of the vehicle.
4 82
Features of your vehicle
Daytime running light
(if equipped)
Daytime Running Lights (DRL) can
make it easier for others to see the
front of your vehicle during the day.
DRL can be helpful in many different
driving conditions, and it is especially
helpful after dawn and before sunset.
The DRL system turns OFF when:
1. The multifunction switch is in the
OFF position. (if equipped)
OBK049045
OBK049046
2. The headlights are ON.
3. The turn signal is ON. (the blinking
Lighting control
Parking light position (
)
side of the DRL will turn off)
The light switch has a Headlight and
When the light switch is in the park-
4. The hazard warning light is ON.
a Parking light position.
ing light position (1st position), the
5. The parking brake is applied.
tail, license and instrument panel
To operate the lights, turn the knob at
lights are ON.
6. Engine stops.
the end of the control lever to one of
the following positions:
(1) OFF position
(2) Parking light position
(3) Headlight position
(4) Auto light position (if equipped)
4 83
Features of your vehicle
CAUTION
•
Never place anything over
sensor
(1) located on the
instrument panel. This will
ensure better auto-light sys-
tem control.
•
Don’t clean the sensor using a
window cleaner. The cleaner
may leave a light film which
could interfere with sensor
OBK049047
OBK049048
operation.
Headlight position (
)
Auto light position (if equipped)
•
If your vehicle has window tint
or other types of metallic coat-
When the light switch is in the head-
When the light switch is in the AUTO
ing on the front windshield,
light position
(2nd position), the
light position, the taillights and head-
the Auto light system may not
head, tail, license and instrument
lights will be turned ON or OFF auto-
work properly.
panel lights are ON.
matically depending on the amount
of light outside the vehicle.
✽ NOTICE
The ignition switch must be in the
ON position to turn on the head-
lights.
4 84
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст