Hyundai ix20 (2017 year). Manual — part 24

Maintenance
CAUTION
When replacing a blown fuse or
relay with a new one, make sure
the new fuse or relay fits tightly
into the clips. The incomplete fas-
tening fuse or relay may cause
the vehicle wiring and electric
systems damage and a possible
fire.
Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and termi-
OYN079018
OYN079023
nals may be fastened incomplete-
Instrument panel fuse replace-
3. Pull the suspected fuse straight out.
ly, and it may cause a possible
ment
Use the removal tool provided in the
fire. If fuses, relays and terminals
engine compartment fuse panel cover.
1. Turn the ignition switch and all other
fastened with bolts or nuts are
4. Check the removed fuse; replace it if it
blown, we recommend that you
switches off.
is blown.
consult an authorized HYUNDAI
2. Open the fuse panel cover.
5. Push in a new fuse of the same rating,
dealer.
and make sure it fits tightly in the clips.
Do not input any other objects
If it fits loosely, we recommend that you
except fuses or relays into
consult an authorized HYUNDAI dealer.
fuse/relay terminals such as a
If you do not have a spare, use a fuse of
driver or wiring. It may cause con-
tact failure and system malfunc-
the same rating from a circuit you may
tion.
not need for operating the vehicle, such
as the cigarette lighter fuse.
If the headlights or other electrical com-
ponents do not work and the fuses are
OK, check the fuse panel in the engine
compartment. If a fuse is blown, it must
be replaced.
7 64
Maintenance
NOTICE
If the memory fuse is pulled up from
the fuse panel, the warning chime,
audio, clock and interior lamps, etc.,
will not operate. Some items must be
reset after replacement. Refer to
“Battery” in this section.
Even though the memory fuse is
pulled up, the battery can still be dis-
charged by operation of the head-
lights or other electrical devices.
OJC070020
Diesel only
Memory fuse
Your vehicle is equipped with a memory
fuse to prevent battery discharge if your
vehicle is parked without being operated
for prolonged periods. Use the following
procedures before parking the vehicle for
prolonged periods.
1. Turn off the engine.
2. Turn off the headlights and tail lights.
3. Open the driver’s side panel cover and
pull up the memory fuse.
OYN079021/OYN079022
Engine compartment panel fuse
replacement
1. Turn the ignition switch and all other
switches off.
2. Remove the fuse box cover by press-
ing the tab and pulling up the cover.
7
65
Maintenance
3. Check the removed fuse; replace it if it
NOTICE
is blown. To remove or insert the fuse,
If the main fuse is blown, we recom-
use the fuse puller in the engine com-
mend that you consult an authorized
partment fuse panel.
HYUNDAI dealer.
4. Push in a new fuse of the same rating,
and make sure it fits tightly in the clips.
If it fits loosely, we recommend that
you consult an authorized HYUNDAI
dealer.
CAUTION
After checking the fuse panel in the
OYN079019
engine compartment, securely
install the fuse panel cover. If not,
Main fuse
electrical failures may occur from
If the main fuse is blown, it must be
water leaking in.
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture
above.
3. Replace the fuse with a new one of the
same rating.
4. Reinstall in the reverse order of
removal.
7 66
Maintenance
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity.
Inner fuse panel
Engine compartment fuse panel
NOTICE
Not all fuse panel descriptions in this
manual may be applicable to your vehi-
cle, the information is accurate at the
time of printing. When you inspect the
fuse panel in your vehicle, refer to the
fuse panel label.
Diesel only
OYN079024/OYN079025/OYN079026
7 67
Maintenance
Inner fuse panel
Description
Fuse rating
System
Protected Component
25A
POWER WINDOW
Left Power Window
25A
POWER WINDOW
Right Power Window
10A
OUTSIDE MIRROR HEATED
Outside Mirror Defroster
10A
BLOWER
Air Conditioning System, ECU
20A
DOOR LOCK
Door Lock/Unlock
20A
SUNROOF
Sunroof
15A
SAFETY POWER WINDOW
Safety Power Window (Driver)
10A
FOLDING MIRROR
Outside Mirror Folding Switch, Center Facia Switch
10A
TAIL LAMP
Left Tail Light
10A
TAIL LAMP
Right Tail Light
10A
START
Start Motor Relay
10A
DAYTIME RUNNING LIGHT
BCM
15A
HAZARD WARNING SIGNAL
Center Facia Switch
POWER DISTRIBUTION
25A
Smk Unit
MODULE
POWER DISTRIBUTION
10A
Smk Unit
MODULE
10A
HEADLAMP HI INDICATOR
Cluster
7 68
Maintenance
Description
Fuse rating
System
Protected Component
MOTOR DRIVEN POWER
10A
MDPS
STEERING
TRANSMISSION
15A
Speed In Sensor, Speed Out Sensor, Speed Sensor, Inhibitor Switch
CONTROL UNIT
15A
IGNITION COIL
Ignition Coil, Condensor
HLLD Switch, HLLD Actuator, BCM, Air Conditioning System, Sunroof,
10A
IGNITION
ETCS
WINDSCREEN WIPING
25A
Front Wiper Motor Relay, Multi Function Switch Wiper
SYSTEM (CONTINUOUS)
10A
FRONT FOG LAMP
Front Fog Lamp, BCM
10A
REAR FOG LAMP
Rear Fog Lamp, BCM
10A
ROOM LAMP
Room Lamp Switch, MUT
15A
STOP LAMP
Stop Lamp, Stop Relay
10A
CLUSTER
Cluster, BCM, Digtal Clock
10A
IGNITION
Audio (ISG),TPMS, Center Facia Switch
10A
ANTI-LOCK BRAKE SYSTEM
Yaw Rate Sensor, ABS (ESC),ESC Switch
10A
B/UP LAMP
Back Up Lamp
ELECTRONIC (ENGINE)
10A
ECU, AFS, SMK Unit
CONTROL UNIT
7 69
Maintenance
Description
Fuse rating
System
Protected Component
RAIN SENSOR
10A
Rain Sensor Relay (PTC, Fuel Filter Heater)
(PTC HEATER )
FRONT HEAT RAYS JOIN
15A
Front Deicer, BCM
GLASS
15A
POWER OUTLET
Front Power Outlet
25A
POWER OUTLET
Rear Power Outlet, Center Power Outlet, Navigation
10A
ACCESSORY
Audio, BCM, DC Converter, Digtal Clock
10A
AIR BAG INDICATOR
Cluster (Air Bag Indicator)
10A
AIR BAG
ACU
DIRECTION INDICATOR
10A
Side Repeater Lamp (LH/RH), Rear Combination Lamp (LH/RH)
TURN SIGNAL LAMP
10A
STATIC BENDING LAMP
Static Bending Lamp
15A
WIPER SYSTEM RR
Rear Wiper Motor, Rain Sensor, Multi Function Switch Wiper
15A
SEAT HEATER
Center Facia Switch
20A
AUDIO
Audio
10A
LUGGAGE LAMP
Luggage Lamp, BCM
7 70
Maintenance
Engine compartment fuse panel
Description
Fuse rating
System
Protected Component
50A
IGNITION
Start Sol, IGN_SW
I/P Junction(Stop Lamp 15A,Tail Lamp Relay, Room Lamp, Luggage
50A
BATTERY
10A,Tail Lamp LH 10A, Tail Lamp RH 10A)
30A
FUEL FILTER HEATER
Fuel Filter Heater (Diesel)
125A/150A
ALTERNATOR
Alternator (Gasoline/Diesel)
40A
ANTI-LOCK BRAKE SYSTEM
ABS, ESC
40A
ANTI-LOCK BRAKE SYSTEM
ABS, ESC
REAR HEAT RAYS JOIN
40A
I/P Junction(Rear Heater Relay, Heated Mirror 10A)
GLASS
40A
BLOWER
Blower Motor
MOTOR DRIVEN POWER
80A
MDPS(Motor Driven Power Steering)
STEERING
30A
IGNITION
Ignition Switch (IG1, Accessory)
40A
COOLING FAN
Cooling Fan Relay(High), Cooling Fan Relay(Low)
ELECTRONIC (ENGINE)
"Main Relay, ECU 4 10A, ECU 1 20A, ECU 3 10A, Sensor 1 10A, Sensor 2
30A
CONTROL UNIT
10A,Injector 15A"
"I/P Junction(Hazard 15A, Power Window Relay, Power window LH 25A,
50A
BATTERY
Power window RH 25A ,Safety Power window 15A, Sunroof 20A, PDM 2
10A, Deicer 15A, Folding 10A, PDM1 25A, Door Lock 20A)"
7 71
Maintenance
Description
Fuse rating
System
Protected Component
20A
HEADLAMP HIGH BEAMS
Headlamp High Beam
10A
HORN
Horn, Burglar Alarm Horn, Battery Sensor
20A
HEADLAMP DIPPED BEAMS
Headlamp Low Beam
20A
FUEL PUMP
Fuel Pump Relay (Gasoline)
ELECTRONIC (ENGINE)
10A
ECU (Gasoline), Air Heater (Diesel)
CONTROL UNIT/AIR HTR
INJECTOR, FUEL PUMP RELAY (GASOLINE)
15A
INJECTOR
E-EGR, WGT, E-EGR, CPS, FUEL HEATER RELAY (DIESEL)
AIR CONDITIONING RELAY, STOP SW, COOLING FAN RELAY (HIGH),
10A
SENSOR 1
COOLING FAN RELAY (LOW)
10A
B/UP LAMP
Rear Combination Lamp
10A
AIR CONDITIONER
Air Conditioning Relay
10A
HEADLAMP DIPPED BEAMS
Cluster(Low Indicator), Head Lamp Low LH
ELECTRONIC (ENGINE)
20A
ECU
CONTROL UNIT
10A
HEADLAMP DIPPED BEAMS
Head Lamp Low RH
ELECTRONIC (ENGINE)
10A
ECU, TCU, GLOW Relay
CONTROL UNIT
10A
RAIN SENSOR
Rain Sensor
7 72
Maintenance
Engine compartment fuse panel (Diesel engine only)
Description
Fuse rating
System
Protected Component
PTC HTR 1
50A
PTC Heater 1
PTC Heater 1
PTC HTR 2
50A
PTC Heater 2
PTC Heater 2
PTC HTR 3
50A
PTC Heater 3
PTC Heater 3
GLOW
80A
GLOW Plug
GLOW Plug
7 73
Maintenance
LIGHT BULBS
WARNING - Working on
CAUTION
the lights
If you don’t have necessary tools,
Prior to working on the light, firmly
the correct bulbs and the expertise,
apply the parking brake, ensure
we recommend that you consult an
authorized HYUNDAI dealer. In
that the ignition switch is turned to
the LOCK position and turn off the
many cases, it is difficult to replace
lights to avoid sudden movement
vehicle light bulbs because other
of the vehicle and burning your fin-
parts of the vehicle must be
gers or receiving an electric shock.
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
Use only the bulbs of the specified
assembly to get to the bulb(s).
OJC070027
wattage.
Removing/installing the headlight
Headlight, position light, turn sig-
assembly can result in damage to
nal light, front fog light bulb
the vehicle.
replacement
CAUTION
Type A
Be sure to replace the burned-out
NOTICE
bulb with one of the same wattage
(1) Headlight (Low)
After driving in heavy rain or washing
rating. Otherwise, it may cause
(2) Headlight (High)
the vehicle, headlight and taillight lenses
damage to the fuse or electric
(3) Smart cornering light*
could appear frosty. This condition is
wiring system.
(4) Position light
caused by the temperature difference
between the lamp inside and outside.
(5) Front turn signal light
This is similar to the condensation on
(6) Front fog light*
your windows inside your vehicle during
the rain and doesn’t indicate a problem
* if equipped
with your vehicle. If water leaks into the
lamp bulb circuitry, we recommend that
the system be checked by an authorized
HYUNDAI dealer.
7 74
Maintenance
■ Type A
WARNING - Halogen bulbs
Halogen bulbs contain pressur-
ized gas that will produce flying
pieces of glass if broken.
Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids. Never touch
the glass with bare hands.
G270A03O
Residual oil may cause the bulb
■ Type B
to overheat and burst when lit. A
OJC075027
bulb should be operated only
Type B
when installed in a headlight.
(1) Headlight (Low/High)
If a bulb becomes damaged or
(2) Position light
cracked, replace it immediately
and carefully dispose of it.
(3) Front turn signal light
Wear eye protection when chang-
(4) Static bending light
ing a bulb. Allow the bulb to cool
(5) Front fog light*
down before handling it.
* if equipped
OMD070053N
Headlight bulb
7 75
Maintenance
Traffic Change (For Europe)
■ Type A
■ Type B
• Low beam
• Low/High beam
The low beam light distribution is asym-
metric. If you go abroad to a country with
an opposite traffic direction, this asymmet-
ric part will dazzle the oncoming driver. To
prevent dazzle, ECE regulations demand
several technical solutions (ex. automatic
change system, adhesive sheet, down
aiming). Headlamps are designed not to
dazzle opposing drivers. So you don´t
need to change your headlamps in a
OJC070028
OJC075037
country with the opposite traffic direction.
• High beam
• Static bending light
OJC070031
OJC075039
• Smart cornering light
1. Open the hood.
2. Remove the headlight bulb cover by
turning it counterclockwise.
3. Disconnect the headlight bulb socket-
connector.
4. Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
5. Remove the bulb from the headlight
OJC070030
assembly.
7 76
Maintenance
6. Install a new headlight bulb and snap
Type A
Type A
the headlight bulb retaining wire into
position by aligning the wire with the
groove on the bulb.
7. Connect the headlight bulb socket
connector.
8. Install the headlight bulb cover by turn-
ing it clockwise.
NOTICE
We recommend that the headlight aim-
OJC070032
OJC070029
ing be adjusted after an accident or after
Type B
Type B
the headlight assembly is reinstalled at
an authorized HYUNDAI dealer.
OJC075040
OJC075038
Position light
Turn signal light
1. Remove the cover by turning it counter-
1. Remove the socket from the assembly
clockwise (if equipped).
by turning the socket counterclockwise
2. Remove the socket from the assembly
until the tabs on the socket align with
by pulling it out.
the slots on the assembly.
3. Remove the bulb by pulling it straight out.
4. Insert a new bulb into the socket.
5. Install the socket into the assembly by
pushing it in.
7 77
Maintenance
2. Remove the bulb from the socket by
Front fog light bulbs (if equipped)
pressing it in and rotating it counter-
1. Reach your hand into the back of the
clockwise until the tabs on the bulb
front bumper.
align with the slots in the socket. Pull
2. Disconnect the power connector from
the bulb out of the socket
the socket.
3. Insert a new bulb by inserting it into
3. Remove the bulb-socket from the
the socket and rotating it until it locks
housing by turning the socket counter
into place.
clockwise until the tabs on the socket
4. Install the socket in the assembly by
align with the slots on the housing.
aligning the tabs on the socket with the
4. Install the new bulb-socket into the
slots in the assembly. Push the socket
housing by aligning the tabs on the
into the assembly and turn the socket
socket with the slots in the housing.
clockwise.
OJC070045
Push the socket into the housing and
turn the socket clockwise.
Side repeater light bulb replace-
5. Connect the power connector to the
ment
socket.
Type A
If the light bulb does not operate, we rec-
ommend that the system be checked by
an authorized HYUNDAI dealer.
7 78
Maintenance
OYN079051
OJC070036
OJC075036
Type B
Rear combination light bulb
Type B
1. Remove the light assembly from the
replacement
(1) Tail light
vehicle by pushing the lens forward
Type A
(2) Stop light
and pulling the assembly out.
(1) Stop and tail light
(3) Rear turn signal light
2. Disconnect the bulb electrical connec-
(2) Rear turn signal light
(4) Back-up light
tor.
(3) Back-up light
(5) Rear fog light
3. Separate the socket and the lens parts
(4) Tail light
by turning the socket counter clock-
(5) Rear fog light
wise until the tabs on the socket align
with the slots on the lens part.
4. Remove the bulb by pulling it straight
out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens
part.
7. Connect the bulb electrical connector.
8. Reinstall the light assembly to the
body of the vehicle.
7 79
Maintenance
■ Type A
7. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
8. Reinstall the light assembly to the body
of the vehicle.
9. Tighten the screws.
Tail light (Type B)
OJC070037
OJC070039
If the light does not operate, we recom-
■ Type B
mend that the system be checked by an
authorized HYUNDAI dealer.
Turn signal
light
Stop light
Tail light
OJC070038
OJC075041
Outside
4. Remove the socket from the assembly
1. Open the tailgate.
by turning the socket counterclockwise
2. Loosen the outside light assembly
until the tabs on the socket align with the
slots on the assembly.
retaining screws with a cross-tip
screwdriver.
5. Remove the bulb from the socket.
3. Remove the rear combination light
6. Insert a new bulb by inserting it into the
assembly from the body of the vehicle.
socket and pushing or rotating it until it
locks into place.
7 80

Была ли эта страница вам полезна?
Да!Нет
5 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности