Hyundai Elantra GT (2018 year). Manual — part 5
Safety system of your vehicle
1. SRS control module/Rollover sensor
2. Front impact sensor
3. Side pressure sensor
4. Side impact sensor
OPDE037046N/OPDE036047/OPDE037048N/OPD036049/OPD036050
2-62
Air bag inflation conditions
Although the driver's and front pas-
senger's air bags are designed to
inflate only in frontal collisions, they
also may inflate in other types of col-
lisions if the front impact sensors
2
detect a sufficient impact. Side and
curtain air bags are designed to
inflate only in side impact collisions
or rollover situations, but they may
inflate in other collisions if the side
impact sensors detect a sufficient
OPD036052
impact.
If the vehicle chassis is impacted by
OPD036051
bumps or objects on unimproved
Front air bags
roads, the air bags may deploy. Drive
carefully on unimproved roads or on
Front air bags and the driver's knee
surfaces not designed for vehicle
air bag are designed to inflate in a
traffic to prevent unintended air bag
frontal collision depending on the the
deployment.
severity of impact of the front colli-
sion.
OPD036053
Side and curtain air bags
Side and curtain air bags are
designed to inflate when an impact is
detected by side collision sensors
depending on the severity of impact
resulting from a side impact collision.
2-63
Safety system of your vehicle
Air bag non-inflation conditions
OPD036055
OPD036056
Front air bags are not designed to
Front air bags may not inflate in side
OPD036054
inflate in rear collisions, because
impact collisions, because occupants
In certain low-speed collisions the air
occupants are moved backward by
move in the direction of the collision,
bags may not deploy. The air bags
the force of the impact. In this case,
and thus in side impacts, front air bag
are designed not to deploy in such
inflated air bags would not provide
deployment would not provide addi-
cases because they may not provide
any additional benefit.
tional occupant protection.
benefits beyond the protection of the
However, side and curtain air bags
seat belts.
may inflate depending on the severi-
ty of impact.
2-64
2
OTL035069
OPD036057
OTL035068
In an angled collision, the force of
Just before impact, drivers often
Front air bags may not inflate in
impact may direct the occupants in a
brake heavily. Such heavy braking
rollover accidents because air bag
direction where the air bags would
lowers the front portion of the vehicle
deployment could not provide protec-
not be able to provide any additional
causing it to "ride" under a vehicle
tion to the occupants.
benefit, and thus the sensors may
with a higher ground clearance. Air
However, side and curtain air bags
not deploy any air bags.
bags may not inflate in this "under-
may inflate when the vehicle is rolled
ride" situation because deceleration
over by a side impact collision.
forces that are detected by sensors
may be significantly reduced by such
"underride" collisions.
2-65
Safety system of your vehicle
SRS Care
WARNING
The SRS is virtually maintenance-
free and there are no parts you can
To reduce the risk of serious
safely service by yourself. If the SRS
injury or death, take the follow-
air bag warning light does not illumi-
ing precautions:
nate when the ignition switch is in the
•
Do not attempt to modify or
ON position, or continuously remains
disconnect the SRS compo-
on, have your vehicle immediately
nents or wiring, including the
inspected by an authorized HYUNDAI
addition of any kind of badges
dealer.
to the pad covers or modifica-
Any work on the SRS system, such
tions to the body structure.
OPD036058
as removing, installing, repairing, or
•
Do not place objects over or
Air bags may not inflate if the vehicle
any work on the steering wheel, the
near the air bag modules on
collides with objects such as utility
front passenger's panel, front seats
the steering wheel, instrument
poles or trees, where the point of
and roof rails must be performed by
panel, or the front passen-
impact is concentrated and the colli-
an authorized HYUNDAI dealer.
ger’s panel above the glove
sion energy is absorbed by the vehi-
Improper handling of the SRS system
box.
cle structure.
may result in serious personal injury.
•
Clean the air bag pad covers
with a soft cloth moistened
with plain water. Solvents or
cleaners could adversely
affect the air bag covers and
proper deployment of the sys-
tem.
•
Always have inflated air bags
replaced by an authorized
HYUNDAI dealer.
(Continued)
2-66
Do not modify the front seats.
Air Bag Warning Labels
(Continued)
Modification of the front seats could
• If components of the air bag
interfere with the operation of the sup-
system must be discarded, or if
plemental restraint system sensing
the vehicle must be scrapped,
components or side air bags.
2
certain safety precautions
Do not place items under the front
must be observed. Consult an
seats. Placing items under the front
authorized HYUNDAI dealer for
seats could interfere with the opera-
the necessary information.
tion of the supplemental restraint sys-
OAD035053N
Failure to follow these precau-
tem sensing components and wiring
tions could increase the risk of
Air bag warning labels, required by
harnesses.
personal injury.
the U.S. National Highway Traffic
Do not cause impact to the doors.
Safety Administration (NHTSA), are
Impact to the doors when the Engine
attached to alert the driver and pas-
Start/Stop button is in the ON position
Additional Safety Precautions
sengers of potential risks of the air
may cause the air bags to inflate.
bag system. Be sure to read all of the
Passengers should not move out of
Modifications to accommodate
information about the air bags that
or change seats while the vehicle is
disabilities. If you require modifica-
are installed on your vehicle in this
moving. A passenger who is not
tion to your vehicle to accommodate
Owners Manual.
wearing a seat belt during a crash or
a disability, contact the HYUNDAI
emergency stop can be thrown
Customer Connect Center at 1-877-
against the inside of the vehicle,
378-8727.
against other occupants, or be ejected
from the vehicle.
Do not use any accessories on seat
Adding equipment to or modify-
belts. Devices claiming to improve
ing your air bag equipped vehicle
occupant comfort or reposition the
If you modify your vehicle by changing
seat belt can reduce the protection
your vehicle's frame, bumper system,
provided by the seat belt and increase
front end or side sheet metal or ride
the chance of serious injury in a crash.
height, this may affect the operation of
your vehicle's air bag system.
2-67
Convenient features of your vehicle
Accessing Your Vehicle
3-3
Panoramic Sunroof
3-34
Remote Key
3-3
Sunshade
3-35
Smart Key
3-6
Sliding the Sunroof
3-35
Immobilizer System
3-11
Tilting the Sunroof
3-36
Door Locks
3-12
Closing the Sunroof
3-36
Operating Door Locks from Outside the Vehicle
3-12
Resetting the Sunroof
3-37
Operating Door Locks from Inside the Vehicle
3-13
Sunroof Open Warning
3-38
3
Auto Door Lock/Unlock Features
3-15
Exterior Features
3-39
Child-Protector Rear Door Locks
3-16
Hood
3-39
Theft-alarm System
3-16
Liftgate
3-40
Fuel Filler Door
3-42
Steering Wheel
3-17
Electric Power Steering (EPS)
3-17
Instrument Cluster
3-45
Tilt Steering/Telescope Steering
3-18
Instrument Cluster Control
3-46
Horn
3-18
Gauges and Meters
3-47
Heated Steering Wheel
3-19
Transmission Shift Indicator
3-50
Mirrors
3-19
Warning and Indicator Lights
3-52
Inside Rearview Mirror
3-19
LCD Display Messages
3-63
Side View Mirrors
3-27
LCD Display
3-69
LCD Display Control
3-69
Windows
3-30
LCD Display Modes
3-70
Power Windows
3-31
Trip Computer
3-77
Lighting
3-81
Climate Control Additional Features
3-120
Exterior Lights
3-81
Cluster ionizer
3-120
Interior Lights
3-87
Automatic Ventilation
3-120
Welcome System
3-90
Sunroof Inside Air Recirculation
3-120
Wipers and Washers
3-91
Storage Compartment
3-121
Windshield Wipers
3-91
Center Console Storage
3-121
3
Windshield Washers
3-92
Glove Box
3-121
Rear Window Wiper and Washer
3-93
Sunglass Holder
3-122
Driver Assist System
3-94
Multi Box (with a cover)
3-122
Rear View Camera
3-94
Interior Features
3-123
Manual Climate Control System
3-95
Cup Holder
3-123
Heating and Air Conditioning
3-96
Sliding Armrest
3-124
System Operation
3-100
Sunvisor
3-124
System Maintenance
3-102
Power Outlet
3-125
Wireless Cellular Phone Charging System
3-126
Automatic Climate Control System
3-104
Clock
3-128
Automatic Heating and Air Conditioning
3-105
Clothes Hanger
3-128
Manual Heating and Air Conditioning
3-106
Floor Mat Anchor(s)
3-129
System Operation
3-112
Luggage Net Holder
3-130
System Maintenance
3-114
Cargo Area Cover
3-130
Windshield Defrosting and Defogging
3-115
Auto Defogging System
3-118
Rear Window Defroster
3-119
ACCESSING YOUR VEHICLE
Remote Key (if equipped)
Locking
WARNING
To lock :
1. Close all doors, engine hood and
Do not leave the keys in your
liftgate.
vehicle with unsupervised chil-
2. Press the Door Lock button (1) on
dren. Unattended children
the remote key.
could place the key in the igni-
tion switch and may operate
3. The hazard warning lights will
3
power windows or other con-
blink and the chime will sound
trols, or even make the vehicle
once if the lock button is pressed
move, which could result in
again within four seconds.
serious injury or death.
4. When the doors are locked, the indi-
cator light on the central door lock/
OPD046001
unlock switch will be illuminated.
Your HYUNDAI uses a remote key,
which you can use to lock or unlock
i
Information
a door (and liftgate) and even start
After locking the doors, if you press
the engine.
the Door Lock button again within
1. Door Lock
four seconds, the hazard warning
2. Door Unlock
lights will blink and the horn will
3. Liftgate Unlock
sound one time to confirm that the
doors are locked.
4. Panic
3-3
Convenient features of your vehicle
Unlocking
Now all doors will unlock when the
Panic button (if equipped)
Door Unlock button is pressed one
To unlock:
Press and hold the Panic button (4)
time. To change the setting back,
1. Press the Door Unlock button (2)
for more than one second. The horn
repeat this procedure.
sounds and hazard warning lights
on the remote key.
flash for about 30 seconds.
2. The driver's door will unlock. The
i
Information
To cancel the panic mode, press any
hazard warning lights will blink two
button on the remote key.
times.
After unlocking the doors, the doors
will lock automatically after 30 sec-
Two press unlock setting:
onds unless a door is opened.
If you press the Door Unlock but-
Start-up
ton on the remote key again with-
For information, refer to the "Key
in four seconds, then all the doors
Liftgate unlocking
Ignition Switch" section in chapter 5.
will unlock.
To unlock:
Two press unlock setting can be
NOTICE
1. Press and hold the Liftgate Unlock
changed according to owner's pref-
button (3) on the remote key for
To prevent damaging the remote
erence in the cluster User Settings
more than one second.
key:
mode or with the remote key.
2. The hazard warning lights will
• Keep the remote key away from
• User settings mode method:
blink two times and the liftgate will
water or any liquid and fire.
Select or deselect the 'Two Press
be unlocked.
Internal circuits may malfunc-
Unlock' feature in the User
Once the liftgate is opened and then
tion if the inside of the remote
Settings mode on the cluster LCD
closed, the liftgate will lock automati-
key gets damp (from liquids or
display (User Settings ➞ Door ➞
cally.
moisture) or if it is heated. This
Two Press Unlock).
can exclude the remote key from
• Remote key method:
warranty coverage.
i
Information
Press and hold both Door Lock (1)
• Avoid dropping or throwing the
The word "HOLD" is written on the
and Door Unlock (2) buttons at the
remote key.
button to inform you that you must
same time until the hazard warn-
press and hold the button for more
• Protect the remote key from
ing lights blink.
extreme temperatures.
than one second.
3-4
Mechanical key
Remote key precautions
Avoid placing the remote key and
your mobile phone in the same loca-
The remote key will not work if any of
tion and always try to maintain an
the following occur:
adequate distance between the two
• The key is in the ignition switch.
devices.
• You exceed the operating distance
limit (about 90 feet [30 m]).
i
Information
• The remote key battery is weak.
3
This device complies with Part 15 of
• Other vehicles or objects may be
the FCC rules.
blocking the signal.
Operation is subject to the following
• The weather is extremely cold.
three conditions:
• The remote key is close to a radio
1. This device may not cause harmful
OPD046003
transmitter such as a radio station or
interference, and
an airport which can interfere with
If the remote key does not operate
2. This device must accept any interfer-
normal operation of the remote key.
normally, you can lock or unlock the
ence received, including interference
driver's door by using the mechanical
If the remote key does not work cor-
that may cause undesired operation.
key.
rectly, open and close the door with
3. Changes or modifications not
the mechanical key. If you have a
To unfold the mechanical key, press
expressly approved by the party
problem with the remote key contact
the release button on the remote.
responsible for compliance could
an authorized HYUNDAI dealer.
To return the key to its stored posi-
void the user's authority to operate
If the remote key is in close proximi-
tion, press the release button and
the device.
ty to your mobile phone, the signal
fold the key back into the remote.
could be blocked by your mobile
NOTICE
phone’s normal operational signals.
This is specifically relevant when the
Keep the remote key away from
phone is active such as making and
electromagnetic materials that
receiving calls, text messaging,
block electromagnetic waves to
and/or sending/receiving emails.
the key surface.
3-5
Convenient features of your vehicle
Battery replacement
4. Reinstall the battery cover and key
Smart Key (if equipped)
cover in the reverse order of
If the remote key is not working prop-
removal.
erly, try replacing the battery with a
new one.
If you suspect your remote key might
have sustained some damage, or
you feel your remote key is not work-
ing correctly contact an authorized
HYUNDAI dealer.
i
Information
An inappropriately disposed
battery can be harmful to the
environment and human health.
OPD046044
Dispose of the battery according
Your HYUNDAI uses a Smart Key,
to your local law(s) or regula-
which you can use to lock or unlock
OPD046002
tions.
a door (and liftgate) and start the
Battery Type: CR2032
engine.
To replace the battery:
1. Door Lock
1. Insert a slim tool into the slot and
2. Door Unlock
gently pry open the cover.
3. Liftgate Unlock
2. Using a screw driver, remove the
4. Panic
battery cover.
3. Remove the old battery and insert
the new battery. Make sure the
battery position is correct.
3-6
Locking
Unlocking
i
Information
The door handle button will only
operate when the smart key is within
28~40 inches (0.7~1 m) from the out-
side door handle.
Even though you press the outside
3
door handle button, the doors will not
lock and the chime will sound for
three seconds if any of the following
occur:
• The Smart Key is in the vehicle.
OPD046005
OPD046005
• The Engine Start/Stop button is in
To lock :
To unlock:
ACC or ON position.
1. Close all doors, hood and liftgate.
1. Carry the Smart Key.
• Any door except the liftgate is
2. Either press the door handle but-
open.
2. Either press the driver's outside
ton or press the Door Lock button
door handle button or press the
(1) on the smart key.
Door Unlock button
(2) on the
WARNING
smart key.
3. The hazard warning lights will
blink and the chime will sound
Do not leave the Smart Key in
once.
your vehicle with unsupervised
children. Unattended children
4. When the doors are locked, the
could press the Engine Start/
indicator light on the central door
Stop button and may operate
lock/unlock switch will be illuminat-
power windows or other con-
ed.
trols, or even make the vehicle
move, which could result in
serious injury or death.
3-7
Convenient features of your vehicle
3. The driver's door will unlock. The
Liftgate unlocking
i
Information
hazard warning lights will blink two
To unlock:
times.
•
The door handle button will only
1. Carry the smart key.
operate when the smart key is with-
Two press unlock setting:
in 28~40 inches (0.7~1 m) from the
2. Either press the liftgate handle
If you press the driver's outside
outside door handle and other peo-
button or press and hold the
door handle button or Door Unlock
ple can also open the doors.
Liftgate Unlock button (3) on the
button on the smart key again
smart key for more than one sec-
•
If you press the front passenger's
within four seconds, then all the
outside door handle, while carrying
ond.
doors will unlock.
the Smart Key, all doors will unlock.
3. The hazard warning lights will
Two press unlock setting can be
•
After unlocking the doors, the doors
blink two times.
changed according to owner's
will lock automatically after 30 sec-
preference in the cluster User
onds unless a door is opened.
i
Information
Settings mode or with the smart
key.
•
Either the driver or front passenger
•
The liftgate handle button will only
door can be opened with the door
• User settings mode method:
operate when the smart key is with-
handle button when the smart key is
in 28 inches (0.7 m) from the liftgate
Select or deselect the 'Two Press
within this range.
handle.
Unlock' feature in the User
Settings mode on the cluster LCD
•
The Liftgate Unlock button (3) will
display (User Settings ➞ Door ➞
only unlock the liftgate. It will not
Two Press Unlock).
release the latch and open the lift-
• Smart key method:
gate automatically. If the Liftgate
Unlock button is used, someone
Press and hold both Door Lock (1)
must still press the liftgate handle
and Door Unlock (2) buttons at the
button to open the liftgate.
same time until the hazard warn-
ing lights blink. Now all doors will
unlock when the Door Unlock but-
ton is pressed one time.
To change the setting back, repeat
this procedure.
3-8
Panic button
Mechanical key
Loss of a smart key
Press and hold the Panic button (4)
If the Smart Key does not operate
A maximum of two Smart Keys can
for more than one second. The horn
normally, you can lock or unlock the
be registered to a single vehicle. If
sounds and hazard warning lights
driver's door by using the mechanical
you happen to lose your smart key,
blink for about 30 seconds. To cancel
key.
you should immediately take the
the panic mode, press any button on
vehicle and remaining keys to your
the Smart Key.
authorized HYUNDAI dealer or tow
the vehicle, if necessary.
3
Start-up
You can start the vehicle without
Smart key precautions
inserting the key.
The smart key may not work if any of
For information, refer to the
the following occur:
"Engine Start/Stop Button" sec-
• The smart key is close to a radio
tion in chapter 5.
transmitter such as a radio station
or an airport which can interfere
NOTICE
with normal operation of the trans-
OPD046045
mitter.
To prevent damaging the smart key:
Move the release lever in the direc-
• The smart key is near a mobile two
• Keep the smart key away from
tion of the arrow (1) and then remove
way radio system or a cellular
any liquid or fire. Internal circuits
the mechanical key (2). Insert the
phone.
may malfunction if the inside of
mechanical key into the key hole on
• Another vehicle’s smart key is being
the smart key gets damp (from
the door.
operated close to your vehicle.
liquids or moisture) or if it is heat-
To reinstall the mechanical key, put
ed. This can exclude the smart
If the smart key does not work cor-
the key into the hole and push it until
key from warranty coverage.
rectly, open and close the door with
a click sound is heard.
the mechanical key. If you have a
• Avoid dropping or throwing the
problem with the smart key, contact
smart key.
an authorized HYUNDAI dealer.
• Protect the smart key from
extreme temperatures.
3-9
Convenient features of your vehicle
If the smart key is in close proximity
Battery replacement
i
Information
to your mobile phone, the signal
could be blocked by your mobile
This device complies with Part 15 of
phone's normal operational signals.
the FCC rules.
This is specifically relevant when the
Operation is subject to the following
phone is active such as making and
three conditions:
receiving calls, text messaging,
1. This device may not cause harmful
and/or sending/receiving emails.
interference, and
Avoid placing the smart key and your
2. This device must accept any inter-
mobile phone in the same location
ference received, including interfer-
and always try to maintain an ade-
ence that may cause undesired
quate distance between the two
operation.
devices.
3.
Changes or modifications not
OPD046046
expressly approved by the party
NOTICE
If the Smart Key is not working properly,
responsible for compliance could
try replacing the battery with a new one.
Keep the smart key away from
void the user's authority to operate
Battery Type: CR2032
electromagnetic materials that
the device.
blocks electromagnetic waves to
To replace the battery:
the key surface.
1. Remove the mechanical key.
2. Use a slim tool to pry open the rear
NOTICE
cover of the smart key.
Always have the smart key with
3. Remove the old battery and insert
you when leaving the vehicle. If
the new battery. Make sure the bat-
the smart key is left near the vehi-
tery position is correct.
cle, the vehicle battery may be dis-
4. Reinstall the rear cover of the smart
charged.
key.
If you suspect your smart key might
have sustained some damage, or you
feel your smart key is not working cor-
rectly, contact an authorized HYUNDAI
3-10
dealer.
The engine may not start because
NOTICE
i
Information
the metal may interrupt the transpon-
An inappropriately disposed
der signal from transmitting normally.
The transponder in your key is an
battery can be harmful to the
important part of the immobilizer
If the system repeatedly does not
environment and human health.
system. It is designed to give
recognize the coding of the key, it is
Dispose of the battery according
years of trouble-free service, how-
recommended that you contact your
to your local law(s) or regula-
ever you should avoid exposure to
HYUNDAI dealer.
tions.
moisture, static electricity and
Do not attempt to alter this system or
3
rough handling. Immobilizer sys-
add other devices to it. Electrical
tem malfunction could occur.
Immobilizer System
problems could result that may make
(if equipped)
your vehicle inoperable.
i
Information
The immobilizer system protects your
This device complies with Part 15 of
vehicle from theft. If an improperly
WARNING
the FCC rules.
coded key (or other device) is used,
the engine's fuel system is disabled.
In order to prevent theft of your
Operation is subject to the following
vehicle, do not leave spare keys
three conditions:
When the ignition switch is placed in
anywhere in your vehicle. Your
the ON position, the immobilizer sys-
1. This device may not cause harmful
tem indicator should come on briefly,
immobilizer password is a cus-
interference, and
tomer unique password and
then go off. If the indicator starts to
2. This device must accept any inter-
blink, the system does not recognize
should be kept confidential.
ference received, including interfer-
the coding of the key.
ence that may cause undesired
Place the ignition switch to the
operation.
LOCK/OFF position, then place the
3. Changes or modifications not
ignition switch to the ON position again.
expressly approved by the party
The system may not recognize your
responsible for compliance could
key's coding if another immobilizer
void the user’s authority to operate
key or other metal object (i.e., key
the device.
chain) is near the key.
3-11
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст